BPV 7.5 NW messages queue error

Hi
I have made a new installation of the .net server BPC 7.5 NW - but get an error relatet to the .\Private$\bpcmessagequeue
when running the diagnostic in "Server manager" I do get this error "possibel reason: A workgroup installation computer does not support the operation"
I have tried to rerun the installation but nothing chance - can somone help , I realy need this system working today
BR
Niels R.

the problem were solved - it was caused by a missing .\ in front off the queue name

Similar Messages

CMDTUX_CAT:1380: ERROR: Message queue blocking prevented delivery

Today, I changed a Tuxedo application (server) to the product systems(One master and two slaves). Only a small changes in code. But after a period of running, there are many errors in ULOG:
CMDTUX_CAT:1380: ERROR: Message queue blocking prevented delivery, Qaddr = 583902
And then, the server is died. After restart the server, this will happen again later.
I don't know why this happens? Thx.

Hi Bill,
This is happening because the BRIDGE process received a message from the network and was unable to place the message on the intended IPC queue. This could be because the server handling that message is backed up, or the system IPC resource settings are too low. Please check the recommended actions in:
http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/messages/cdtux/cdtux013.html
Regards,
Todd Little
Oracle Tuxedo Chief Architect

LIBTUX_CAT:681: ERROR: Failure to create message queue

I am getting the following error while starting PeopleSoft Application server for demo data base on Oracle Enterprise Linux 5.5 64 bit.
Can someone please help me what am I doing wrong here?
075417.localhost.localdomain!PSANALYTICSRV.4065.3909714272.0: LIBTUX_CAT:262: INFO: Standard main starting
075418.localhost.localdomain!PSRENSRV.4072.491399232.-2: 11-19-2010: Tuxedo Version 10.3.0.0, 64-bit
075418.localhost.localdomain!PSRENSRV.4072.491399232.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
075418.localhost.localdomain!PSRENSRV.4072.491399232.-2: LIBTUX_CAT:248: ERROR: System init function failed, Uunixerr = : msgget: No such file or directory
075418.localhost.localdomain!tmboot.4023.3569636960.-2: CMDTUX_CAT:825: ERROR: Process PSRENSRV at localhost.localdomain failed with /T tperrno (TPEOS - operating system error)
075418.localhost.localdomain!tmboot.4023.3569636960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
075422.localhost.localdomain!BBL.4020.2558671968.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
075425.localhost.localdomain!PSADMIN.4014: End boot attempt on domain fdmo91

Never mind, I changed the kernel.msgmni to 1024, rebooted the server and then it started just fine.

Domino Provision error: No message queue with that name

Hi,
Recently when we try the domino provisioning we often receive this error:
No message queue with that name.
This error is intermittent.
Does any one has any idea why?
Thanks

Hi Wushilin,
We are also encountering the same problem.
Are you still facing the same issue?
If you have solved the problem, can you share the solution?
Thanks!

Error - ipi, message queue operation failed

we are trying to startup bmq but its finished with error.
Please could you help us ?
BEA MessageQ, V5.0 RP8, Wed Mar 29 13:13:49 EST 2000
Copyright (c) 2000 BEA Systems, Inc. All rights reserved.
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, group control process for group 102 is running
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, queuing engine is running
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
ipi, message queue operation failed
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, initialization failure
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, caught signal 15
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, queuing engine is exiting
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, group control process for group 102 is exiting

Could you please provide the init file and the OS information,
Also, Please enable the DMQIPI_TRACE to get more trace if possible, thanks.
Regards,
/Lingtao
Edited by: Lingtao on Mar 6, 2012 2:51 AM

Ile system or message queue is no longer available

Hi All,
We are using DB2 and AIX. We getting below error message in db2 log file.Please advise on this issue.
2014-08-13-05.09.08.624033+060 I12752832A1291     LEVEL: Error (OS)
PID     : 25756258             TID : 1           PROC : db2fmp (168768) 0
INSTANCE: db2fdf               NODE : 000
APPID   : 10.144.69.239.57155.140801190410
EDUID   : 1                    EDUNAME: db2fmp (168768) 0
FUNCTION: DB2 Common, OSSe, OSSMountListing::getNext, probe:90
MESSAGE : ECF=0x90000034=-1879048140=ECF_FILE_REMOTE_SYSTEM_NOT_ACTIVE
          File is on a remote system and the link to that system is not active
CALLED : OS, -, statvfs
OSERR   : ESTALE (52) "A file, file system or message queue is no longer available."
CALLSTCK: (Static functions may not be resolved correctly, as they are resolved to the nearest symbol)
[0] 0x09000000074F5548 pdOSSeLoggingCallback + 0x34
[1] 0x0900000008F0A6C4 oss_log__FP9OSSLogFacUiN32UlN26iPPc + 0x1C4
[2] 0x0900000008F0AB70 ossLogSysRC + 0x70
[3] 0x0900000008F2EB90 getNext__15OSSMountListingFCPC23OSSMountListingGetParamCP12OSSMountInfo + 0x4B0
[4] 0x09000000020314A4 db2sap_mount_info + 0x3C4
[5] 0x0900000007760EE4 sqloInvokeFnArgs + 0xB4
[6] 0x0900000007760D44 @76@sqlerRunRoutine__FP13sqleInvokerCBPi + 0x168
[7] 0x0900000007760AD0 sqlerDyload + 0x140
[8] 0x090000000774AA40 sqlerFmpListener + 0x154
[9] 0x0000000100001230 main + 0x910
Regards,
Raj

Hi,
I have checked with AIX team filesyetm every thing fine.Please tell me which filesystem caused thi issue.
Reagrds,
Raj

Inbound queue error

Hi Gurus,
I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
i hav e cheked the table but not too sure about how to activate the queue.
please help.
Regards,
Samarjit

Sounds like you switched backends on the CRM system. You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system. Can you tell us a little more about your system landscape and we can then see what needs to be done?

Message Queue Blocking / MSGMNI Setting

Hi All,
Firstly, many thanks to all that can assists. I am currently getting Message Queue
Blocking messages in my ULOG files in my Tuxedo Application. (Tux ver 7.1 in Unix).
I am not sure what is causing this, but started to look into the Tux Config (UBB.MP)
and System message queue setting. Detailed as follows:
1)
Listed below is the system message queue setting:
set msgsys:msginfo_msgmni=2000
set msgsys:msginfo_msgmax=128000
set msgsys:msginfo_msgmnb=100000
set msgsys:msginfo_msgssz=256
set msgsys:msginfo_msgseg=25088
set msgsys:msginfo_msgtql=1550
set msgsys:msginfo_msgmap=1000
According to the BEA site, the MSGMNI is determined by this formula:
MSGMNI = MAXACCESSERS + 7 + (no. of servers with REPLYQ) + (no. MSSQ sets) - (no.
of servers with MSSQ sets)
The following is my current Tux. Config (UBB.MP) is set as :
- MAXACCESSERS = 2300
- Each servers (4 types in total) has its own REPLYQ and RQADDR.
- The same type of servers are set the same across 4 application servers.
Hence, my MSGMNI should be a minimum 2339 (ie. MSGMNI = 2300 + 16 + 16 - 0 = 2339).
But my current MSGMNI is 2000.
Would this contribute to my Message Queue Blocking?
Is my understanding correct and is this something I should change to avoid Message
Queue Blocking? Any helps and advice is much appreciated.

Malcolm,
Your information and explanations behind these error messages are very useful.
It allow me to further understand Tuxedo internal processing and at the same time
give me a chance to start analysing these fields.
I am reluctant to ask further questions at the mean time. I will use your suggestions
as a starting point.
I will certainly keep you posted of the outcome when I have made the changes in
my UBB config and machine parameters.
Many thanks with your help/explanations Malcolm. It helps alot!
Cheers.
David.
"Malcolm Freeman" <[email protected]> wrote:
>
Hi David,
The MSGTQL reference you give (Solution S-00488) refers to the BEA MessageQ
product
and is not relevant to Tuxedo.
The error messages indicate that the queue buildup is probably due to
a restartable
server failing. What happens is this:
When a restartable server fails its IPC queue remains in place and continues
to
receive messages (which will be processed when the server restarts).
Depending
on the time taken to restart, the queue could become full and unable
to receive
any more messages, and this is probably why you got the message CMDTUX_CAT:1380
indicating that the BRIDGE process was unable to put a message on the
server's
queue.
A server is only restarted when the BBL does a SANITYSCAN check. If,
for example,
your SANITYSCAN interval is 300 seconds and your server fails immediately
after
the previous scan, then there will be a delay of almost 5 minutes before
the failure
is detected and the server restarted - plenty of time for the queue to
fill up.
There are a few things you could do:
The key thing would be to find out why the server is failing, and fix
the problem.
If this is not possible immediately, consider some of the other ideas
below.
Have several servers form an MSSQ to service this queue; then if one
fails the
others will continue processing the messages while the failed server
restarts
(this assumes, of course, that your application does not require the
messages
to be processed in strict order through the server).
Reduce the SANITYSCAN interval (but don't make it too small). This would
reduce
the average time taken to restart the server.
Increase the size of the IPC queue (MSGMNB) so that it can hold more
messages.
I'm not sure why you got a LIBTUX_CAT:1485 message, but this could be
due to a
BRIDGE failure as a result of the congestion.
The NETLOAD parameter would reduce the number of messages going to the
remote
machine, but only if the local machine offers the same service. If the
remote
machine is the only source of the service then NETLOAD will have no effect.
I
recommend you do a search of this newsgroup for postings on "load balancing"
there's some good stuff which will explain how load balancing works.
Depending how things go, it might not be a bad idea to open a case with
BEA Support
and ask for guidance (remember to submit your ubbconfig (or preferably
do a tmunloadcf)
together with the complete ULOGs from both the master and the slave machine).
Hope this helps some.
Regards,
Malcolm.
"Dave" <[email protected]> wrote:
Hi Malcolm,
Thank you for your reply. Interesting point you have made about theMSGTQL
value.
Based on your suggestion I went hunting around the BEA site and found
the following
snipplet:
"- The MSGTQL parameter must be set to a value greater than or
equal to the MSGMNI setting."
(http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_solution&answerpage=solution&page=msq/S-00488.htm)
If the above point is valid, then my MSGTQL is definitely way too low.
IF this
be the case, would you know of a method to work out what my MSGTQL bytes
value
should be?
Additionally, I have looked at other parameters which I could tune,and
would
adding a NETLOAD parameter in the *MACHINES section will reduce remote
servers
call? Which potentially, maybe reduce message queue blocking?
FYI:
The error messages I am seeing in my ULOG file are:
"LIBTUX_CAT: 1477 : ERROR .SysServerDied
LIBTUX_CAT: 1476 : ERROR: .SysServerRestarting"
Which then leads to message queue blocking
"CMDTUX_CAT: 1380 : ERROR: Message queue blocking prevented delivery,
Qaddr=..."
and potentially "LIBTUX_CAT: 1485 .SysNetworkDropped."
Many Thanks. Hope to hear from you (Malcolm) or other parties out there
that can
assists.
Thanks.
David

InterConnect - FTP adapter:Message queue empty

Hi,
I have installed oracle InterConnect 9.0.4.
The send point and receive end point are configured as separate folders
ota.send.endpoint=ftp://hcsdlx01/interexample/sender/
ota.receive.endpoint=ftp://hcsdlx01/interexample/receiver
We have placed an xml file at the sender location.
And trying to retrieve at reciever end point
But we are getting a message saying message queue empty in the oailog.txt
can anyone shed the possible sources of error.
Regards
Venkat

Finally succeeded in spotting error.
The FTP adapter.ini file was not configured properly
The point is that The send point and receive points should be as per the file system.
In our case the endpoint as we see in browser say:
ftp://example/endpoint
but in the file in Unix server was
<dir1>/<dir2>/endpoint
In the adapter.ini we changed to endpoint = <dir1>/<dir2>/endpoint.
It started working properly,
Thank u marcus

Message has Error Status Outbound Side

Hi All,
I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
Thanks,
Sudheer.

Hi,
Where are you find the Error and
> Process engine all steps completed Sucessfully and created Idocs in XI....
Can you explain in detail
Regards
Sangeetha

NoClassDefFoundError in Java client after Message Queue upgrade

Hi,
I upgraded from version 3.5 SP1 to Message Queue 3 2005Q1.
The Java client I was using from a remote client seems to be throwing a NoClassDefFound error when I use the new imq.jar .
java.lang.NoClassDefFoundError: com/sun/messaging/jmq/Version at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<clinit>(ConnectionImpl.java:83) at com.sun.messaging.BasicConnectionFactory.createConnection(BasicConnectionFactory.java:110)
Any ideas about this ?
Thanks,
Rini

Looks like you've run into a bug where com/sun/messing/jmq/Version.class is missing from imq.jar .
A workaround is to add imqxm.jar to your client CLASSPATH. I've logged bug 6237112 to track this.
http://wwws.sun.com/software/products/message_queue/

Revised product name: "Oracle GlassFish Enterprise Message Queue"

Hello,
the release notes for OpenMQ 4.5 build 16 include a note about a revised product name, "Oracle GlassFish Enterprise Message Queue". Is this planned to be the future product name for the commercial product (the product formerly known as Java System Message Queue), or is this meant to be the name for both versions?
Many thanks in advance,
Michael Justin
Edited by: 801285 on 10.10.2010 01:49

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

B2B-50037: B2B inbound message processing error

We are trying to implement B2B with Customer EDI X12 850 Inbound with SOA
Application server Version 11.1.1.4.0 (weblogic)
Hitting the following error in the logs
MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/8504010Viterra.ecs"
Was successful in overcoming all the usual obstacles of finding the TP, Document Type, protocol etc...However hitting the above error. 8504010Viterra.ecs is a custom spec builder document we created and "8504010Viterra.ecs" was browsed from the windows PC into the Document Type B2B set up. I am willing to use a seeded ecs file but do not know how to find one for X12 850 4010 version....?
Went through one SR that asks you upload a group ECS file but that did not help in our case....Following was the SR
"B2B-50037 B2B INBOUND MESSAGE PROCESSING" Error with EDIX12 And DEF 830 VER 200\0 [ID 1357136.1]
Please help
Now at the agreement level, if we set the translate to No and Validate to No then B2B completes normally but we do want B2B to translate the file so that we can get it in XML form for us to transform and process it in BPEL
Any help or hint is really appreciated!

Anuj
THANK YOU SO MUCH!!! I cannot thank you enough for this
I was playing around so much with the document type, the protocol version etc. that i must have inadvertently messed up the repository. I took the export of the data as you suggested, purged the design repository and reimported the zip. I also had to restart the server since the ftp was not kicking in...& wholla! the message got translated into XML and went into the queue
Thanks again
Gopal Iyer
Edited by: ghiyer on Nov 10, 2011 10:07 AM

Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
Praveen

Hello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log?

JES5 on HPUX C API Message Queue problem

OK. I know there's not too many of you out there, but I've been trying to compile a simple "C" helloworld pub/sub application using GCC. The examples shows using 'aCC' instead of 'gcc' to compile on HPUX. I'm able to compile using gcc, but the application core dumps.
Is the Message Queue, C-API & library compatable with applications compiled with gcc on the HPUX platform? Or will i have to use HP's Ascii C Compiler to get it to work.
gcc build options:
g++ -x c -fPIC -DHPUX11 -D_REENTRANT -I/opt/sun/mq/include -o Producer -L/opt/sun/mq/lib -L/opt/sun/private/lib -lnss3 -lmqcrt -Wl,+b,/opt/sun/private/lib Producer.c
Error during execution:
/usr/lib/dld.sl: Unresolved symbol: __shlinit (code) from /opt/sun/mq/lib/libmqcrt.sl
Abort(coredump)
Thanks
Message was edited by:
weinhard

After switching to HP's ANSI C compiler i get the exact same error message.
Any ideas as to what the permissions should be on the symbolic link to the real shared library. The installed permisstion/owners are:
lrwxr-xr-x 1 bin bin 29 Sep 12 00:45 libmqcrt.sl -> /opt/sun/mq/lib/libmqcrt.sl.1

BPV 7.5 NW messages queue error

Similar Messages

Maybe you are looking for