BR Backup termination -The physical end of the tape has been reached.

Hello
We have taking the BR Offline backup on weekly basis, Now we are facing the below issue
Our Production Database size was 1500GB , we have compressing to take the backup in HP LT03 800GB Media
But Error through as per the below
dd: unable to initialize ASPI manager
dd: using NT tape support
dd: The physical end of the tape has been reached.
dd: write error: The physical end of the tape has been reached.
13573+0 records in
13572+0 records out
1 write error
dd: The physical end of the tape has been reached.
If it is possible to add additional media for this backup- Please help me to solve this issue
Regards
M.Karthik
+91 99401 87552

I ended up returning the camera and got 2 XL1's for cheap. HD is just not ready for us yet. Reproduction costs are to much (HD DVD, or BlueRay). Maybe in a few years when the HD media battle is over.
The guy at the camera store said one of the issues maybe our version of FCE but I was sure we had the latest and greatest 3.5.1. He said we should record over the whole tape (blank) then reuse it to get the time codes right with FCE.
MacBook 2GHz 2GB, Mac Pro Quad 3GHz 6GB Mac OS X (10.4.9)

Similar Messages

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

TS3988 ough my ipad used it says te maximum number of accounts has been reached .i do not no the preavous owners acconts help

i bought my ipad udes it says the maximum number of free accountd has been reached i dont no the preavious owners account help

All you can do is create an account to use on another iOS device of Mac running OS X 10.7.2 or higher, if you have one. If you don't, perhaps a friend with one would do this for you. Or, as a long shot, you could try going to the genius bar at a nearby Apple store to see if they would allow you to do this on one of their devices.

I can't sign into iCloud. It says the maximum number of accounts allowed has been used. iPad is secondhand. How do I clear it of previously used accounts.

I Can't sign into iCloud. I get a message saying that the maximum number of free accounts has been reached on my device. It is a secondhand device that had been wiped. The seller has no idea why this is happening.

Thanks for reply. I can't get find my iPad. I've just looked in App Store to no avail. My daughter in law says I need to sign in to iCloud for that an that's not possible. My phone is an android an finding apple very difficult to use but she has phone an pad an she connected my pad to laptop to try an sort it with no luck. She also sent some docs to my kindle app through iTunes. I just tried to update Amazon an got asked for password for her email address instead of mine. This iPad is a nightmare. thanks anyway from Sally.

Hi - I want to establish my Time capsule at the other end of the house, for security reasons. If a fire occurs at my computer, it is not much help if the backup is adjacent.

Hi - I want to establish my Time capsule at the other end of the house, for security reasons. If a fire occurs at my computer, it is not much help if the backup is adjacent. From what I have read, the TC requires an ethernet connection to the outside world (which is where my computer is). I don't understand this; I think my wireless network (airport) should be able to handle backups, since it is capable of broadcasting video, which has a much higher transfer bit-rate. So, why can't I use Airport for my backups to Time Capsule?
- Thanks, Gareth

You can absolutely back up to your time capsule via wifi. This is what the majority of people with a time capsule do. It connects to a modem or WAN access point via ethernet though.

Hi, i am having an issue with a basic motion scroll effect. I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki Lapan

Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!!

Printing to a Imagesetter (Platemaker) from PageMaker 6.5 on Windows 7 OS I get a message from the platesetter there is no process on the other end of the Pipe Any Ideas

I am running PageMaker 6.5 on a Windows 7 OS. I can print to all my printers except one. It is a Platesetter or sometimes called an imageseter. When I send a file to it, it gives me the message "No Process On The Other End Of The Pipe". I have installed and downloaded all PPD's and such and installed them the same as they were previously installed on a Windows XP PC when it worked great. Any ideas?

Go back to XP. PM has been for more than 10 years and is unsupported under XP. In fact, 6.5 has support only for Windows 2000 and earlier.

Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable?

Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.

No.
You need to use this.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
or this
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

How to find the physical path of the ASM disks?

I am in a dilemma on how to find out the physical path of the ASM disks. I tried the following query, but as you can see it is not providing me the physical path of the LUN. This is a 2 node 10.2.0.4 RAC Cluster using asmlib package.
col name format a20
col path format a20
col label format a20
select name, path, label from v$asm_disk;
NAME PATH LABEL
ORCL:ASM103 ASM103
ORCL:ASM104 ASM104
ORCL:ASM117 ASM117
ASM101 ORCL:ASM101 ASM101
ASM102 ORCL:ASM102 ASM102
ASM105 ORCL:ASM105 ASM105
ASM106 ORCL:ASM106 ASM106
ASM107 ORCL:ASM107 ASM107
ASM108 ORCL:ASM108 ASM108
ASM109 ORCL:ASM109 ASM109
ASM110 ORCL:ASM110 ASM110
NAME PATH LABEL
ASM111 ORCL:ASM111 ASM111
ASM112 ORCL:ASM112 ASM112
ASM113 ORCL:ASM113 ASM113
ASM114 ORCL:ASM114 ASM114
ASM115 ORCL:ASM115 ASM115
ASM118 ORCL:ASM118 ASM118
ASM119 ORCL:ASM119 ASM119
ASM120 ORCL:ASM120 ASM120
ASM121 ORCL:ASM121 ASM121
ASM122 ORCL:ASM122 ASM122
ASM123 ORCL:ASM123 ASM123
NAME PATH LABEL
ASM124 ORCL:ASM124 ASM124
ASM125 ORCL:ASM125 ASM125
ASM126 ORCL:ASM126 ASM126
ASM127 ORCL:ASM127 ASM127
ASM302 ORCL:ASM302 ASM302
ASM303 ORCL:ASM303 ASM303
ASM304 ORCL:ASM304 ASM304
ASM305 ORCL:ASM305 ASM305
ASM306 ORCL:ASM306 ASM306
ASM307 ORCL:ASM307 ASM307
32 rows selected.
Any help will be appreciated.
--MM

hi
use the following linux command as root:
$oracleasm listdisks
hth

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

I tried to restore my iPod Touch 2nd generation and now it won't sync to itunes. on the screen it shows the usb end of the cord and the iTunes logo over it. Is it broken?

I tried to restore my ipod touch 2nd generation and now it won't sync to itunes. On the screen is the USB end of the cord and the iTunes logo over it.
I have turned it off and on, held the off button down and the select button down but it still comes up with that picture on the screen. Have I broken it?
Please help.
Mimi

It means the device is in recovery mode. You'll need to reconnect it to iTunes and restore it again.
You may need to connect it in recovery mode manually using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

I have Bose Quiet Comfort Headphones. I am unable to insert the male end all the way into the IPAD3. I do have sound in the headphones, however. Is this common for most headsets on the IPAD3?

I have Bose Quiet Comfort Headphones. I am unable to insert the male end all the way into the IPAD3. I do have sound in the headphones, however. Is this common for most headsets on the IPAD3?

No, it's not common for any of the headphonse I've plugged into my iPad, but that doesn't mean it isn't normal for this particular set of headphones and iPad. That said, are you sure you've pushed the plug in all the way? I have found that on my New iPad, the headphone plug requires more effort to connect the plug than on my previous iPad 2. If they sound fine, I guess I wouldn't be concerned. If they don't sound good, it could be an issue.

Can I use an AE as a Bridge allowing me to hardwire my iMac and offer a wifi to my MacBook? The Ethernet in my office is hard wired but does come in from a router on the other end of the building that has a wifi that cant reach my office...

Can I use an AE as a Bridge allowing me to hardwire my iMac and offer a wifi to my MacBook? The Ethernet in my office is hard wired but does come in from a router on the other end of the building that has a wifi that cant reach my office...

Thanks, I thought so but wanted to be sure before running out and buying one... I also called Apple Joint Venture and they helped me set it up without the Airport by using my iMac as the wifi! Thanks again!

Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
My Computer is an HP p6653w and my default browser is Firefox 3.6
My operating system is windows 7.

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

BR Backup termination -The physical end of the tape has been reached.

Similar Messages

Maybe you are looking for