BR*Tools 7.0 and 7.1 what Instance Client version 10202 or 10204

I'm not sure if this is the wright form, but here goes. I have a question. What Instance Client verion (10.2.0.2 or 10.2.0.4) do you install with BRTools 7.0 and BRTools 7.1. Can you use either Instance Client version with either versions of BR*Tools?

Similar Messages

6i with patch 10 and get FRM-92150: WEB CLient Version too new...

I have a form 6i and I installed patch 10 and after I do that, I have a error...
FRM-92150: WEB CLient Version too new...
I check both my jinitiator and the config file in the server are the same... any advices?
Thanks

1. Telling you to move this isn't helping you. I understand why you want you want to keep your forum clean, but I see this all the time and all it does is create dead end links.
Why don't you move it and e-mail the person having an issue??
2. Your solution might be to clear the Jar Cache. On Windows this would be in the JInitiator Control Panel.
3. If you ran an update and then rebuilt the server back to the prevoius version you might create this error. In my humble opinion Application Server - General isn't that far off when you don't know the cause.
Thanks!
Michael Seberg

I am trying to make Yahoo my home page I went to tools then opiton and done just what it said do but still it will not keep yahoo as my home page.

I am trying to make Yahoo my home page. I go to tools and put www.yahoo.com as my homepage and but once I restart my computer the home page goes back to something else.

Hi drendah,
Out of curiosity, what page keeps showing up? You should take a look at the Knowledge Base article [[How to set the home page]] and follow the steps to reset your homepage preferences to default. I would try that first to clear out any strangeness. If that works, you can try setting your homepage again to your personal preference.
If that doesn't work you should look at the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved].
Hopefully this helps!

Pro apps Hello. What version of FCP X will work on OS 10.7.5 and how can I get this version?

Pro apps
Hello. What version of FCP X will work on OS 10.7.5 and how can I get this version? I cannot upgrade to a higher version because of other software that I am using . I am aware the 10.1.1 requires OS10.9 and higher but whats the highest version that works on Lion? Thanks anyone

Do you know how to do it?
It's quite simple.
This link will tell you how.
It may look long but that is only because Larry is explaining every little detail to ensure you don't go wrong.
http://www.larryjordan.biz/create-a-dual-boot-mac-os-x-system/
Message was edited by: Ian R. Brown

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Pro

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?

This is quite odd. I wonder if you could try something for me on EACH computer.
Use Help > About Adobe Acrobat DC.
At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
On each of the two machines, what does it say? (I think something odd has happened)

HT1222 I received message: cannot download, select tools, download only and download manually (something like that). Please help, what does this mean?

I received message: cannot download, select tools, download only and download manually (something like that). Please help, what does this mean?

Exactly what it says.
Do as the message says.

DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies"

I have now used Reflow for 2 client prototypes and here is what I have found.

First, I can see Reflow being an incredible prototyping tool if Adobe steps up and makes it a useful tool for production and not just another creative program to help designers build for the web. That's what Muse is for.
So here is my wish list.
Reflow needs to be able to have more control over the DOM elements. By that I mean, we should be able to have a layer based approach (similar to what you can see in Macaw) to move elements around from "box" to "box" (also, can't we just call them "divs"). Nesting is crucial. Also, what's up with all the IDs in the published files? We should be able to name and create classes for these elements before it publishes. Also, support the basic HTML tags for users to control.
On that note, shared elements should have one style sheet instead of a style sheet for each page.
Also, elements should be able to be saved to a library for use on multiple pages. It is a nightmare now if you create an element on a page that needs to also be placed on other pages. You have to recreate it on each page as of now.
Support for common CSS frameworks would be an amazing idea...just sayin.
As for type...Edge fonts and Typekit are great but we all know that there are many other font libraries out there such as Google fonts. Also, being able to use your own @font-face should be an option.
I think the overall goal would be able to use the files produced as a starting point for production code. As it stands right now, the code that is produced will require more time to format properly than it would be to build from scratch.
I know Reflow is not meant to be a Dreamweaver or Brackets, but it could really help set the stage for development in those programs. It can improve the workflow of web development vs. just being a "cool new app". It has real potential and I hope it gets the love that it deserves.

Control over DOM: Yup we're working on exposing this even more. You may or may not have noticed the elements panel already in Reflow. You can find it here:
Are you looking for more than that? We're looking at ways to expose the elements panel in a better way, that should be coming soon.
As for stye sheets all being in one, we're debating this. Since we don't know everything you want to do page-to-page, we're holding off making this leap until we can begin cleaning up what CSS we already give you. (see last answer)
Common library elements: yup, we want this too. It's on our backlog.
Frameworks: yup again, on our backlog. Are there frameworks you would prefer? We don't wanna play favorites unnecessarily. We don't know how it might be prioritized, since we've got lots of features to get to.
Additional fonts: yup for this one too, we have it on our backlog to tackle. As a note, most google fonts are available in the Adobe Web Fonts.
Output: We're actively working on improving the CSS output from Reflow. We cannot promise perfect production quality, but the issues you raise are all ones we're eager to minimize.
Thanks for the thorough feedback, we love these kinds of posts!
- Seth

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

Is there a good GUI tool on linux for backups? What do YOU use?

Hi all,
I feel Linux lacks a good and simple graphical tool to do desktop backups for regular users. I'm thinking of writing one myself (probably a front-end to a good command line tool), but before I get started, I want to make sure I'm not reinventing the wheel.
So:
- Is there a good graphical tool available already? It should be: simple (minimalist interface, sane defaults), fast and incremental.
- What do YOU currently use for your desktop backups?
EDIT: rsync alone is not great, because a good backup solution keeps multiple snapshots. Imagine you deleted a file by accident 15 days ago, and realize only today: rsync won't save you.
EDIT2 : I have tried backintime, I think it's a step in the right direction, but it's not that great. Maybe I should improve on it instead of starting something new, though.
EDIT3 : Has anyone tried PyBackPack (http://andrewprice.me.uk/projects/pybackpack/) ? I'm trying it at the moment and it seems to be getting it right. I'd like to hear some success stories before getting my hopes to high
Last edited by lardon (2010-05-11 13:33:55)

It doesn't snapshot -- I occasionally back-up my back-ups and don't need that -- but it does its job well.
#!/bin/bash
### System Backup ##############
# Version 0.5 by Scott Garrett #
# Wintervenom [(at)] gmail.com #
backup_label="demonpit"
exclude="/dev/shm/rsync-excludes.rc"
excludes=(
'tmp/*' # Temp files.
'tmp/.*' # Hidden temp files.
'.mozilla/firefox/*/Cache' # Firefox caches...
'cookies.sqlite' # Mozilla-based cookies.
'formhistory.sqlite' # Mozilla-based form history.
'.thumbnails' # Thumbnail cache.
'.recently-used.xbel' # Recent-open history.
'.ccache' # Compiler caches
'sessionstore.js' # Firefox session-saves.
'.gvfs' # GNOME virtual filesystem.
'.local/share/Trash' # XDG trash.
'.local/share/user-places*' # Recent-open history.
'.purple/logs' # Pidgin/Finch logs.
'.cache/Thunar/thumbnailers.cache' # Thumbnailer cache.
'.cache/chromium' # Chrome cache.
'*~' # Backup/temp files.
out () {
echo ">> $*"
stat_done () {
echo ">> ...done."
stat_fail () {
echo ">> ...failed!"
if [ $UID != '0' ]; then
echo "Must be executed as root user."
exit 1
fi
out "Mouting backup device ('$backup_label')..."
backup_dev=`readlink -f "/dev/disk/by-label/$backup_label"`
if mount | grep -qF "$backup_dev on"; then
backup_root=`mount | grep -F "$backup_dev on" | cut -d' ' -f3`
echo " - This device seems to already be mounted at '$backup_root'."
echo ' Do you want to use this, instead (y/N)?'
echo -n ' << '
read -n1 confirm
echo
[ "$confirm" != 'y' ] && exit 1
else
backup_root="/mnt/$backup_label"
mkdir -p "$backup_root"
if ! mount -o noatime,user "$backup_dev" "$backup_root"; then
echo ' - Failed to mount device.'
exit 1
fi
echo ' - Device mounted successfully.'
fi
out "Backing up system..."
echo > /tmp/rsync-excludes.rc
for file in ${excludes[@]}; do
echo "$file" >> "$exclude"
done
rsync -axl -h --progress --delete --delete-excluded --exclude-from="$exclude" /{home,usr,opt,var,*bin,lib*,etc,boot,root,srv} "$backup_root/$HOSTNAME"
mkdir -p "$backup_root/$HOSTNAME/"{dev,sys,proc,tmp,mnt,media}
mkdir -p "$backup_root/$HOSTNAME/var/"{tmp,lock}
chmod 1777 "$backup_root/$HOSTNAME/tmp" "$backup_root/$HOSTNAME/var/"{tmp,lock}
stat_done
out "Backing up package list..."
pacman -Qqe | grep -v "$(pacman -Qmq)" > "$backup_root/$HOSTNAME/pacman.list"
pacman -Qmq > "$backup_root/$HOSTNAME/aur.list"
stat_done
out "Unmouting backup partition..."
if umount "$backup_dev"; then
rmdir "$backup_root/$HOSTNAME"
rmdir "$backup_root"
else
echo ' - Could not unmount.';
fi

How to configure MDT tool kit files and UDI settings to enable lite touch installation

please assist me for lite touch installation. i have integrated MDT 2013 with SCCM 2012 R2 then not sure what next? like how to configure MDT tool kit files and UDI settings to enable lite touch installation

Here are some examples:
http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
http://damonjohns.com/2013/08/20/integrating-udi-into-your-sccm-osd-task-sequences/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Tools of Backup and Recovery

can any one tell me what are the tools of backup and recovery in the Oracle database?

gqmallah wrote:
Tools used for backup and recovery of an Oracle database are as follows:
1. Export and Import Utilities
2. Backup Mode Tablespace Copies
3. RMAN (Recovery Manager)
4. Oracle Enterprise Manager and the Database Control
5. etcPlease note that #4 is not a tool for backup and recovery, but a web-based front end to the real tools listed in #1 through #3
Edited by: EdStevens on Nov 19, 2009 9:00 AM

I have updated version of Mozilla Firefox 25.0 And adobe flash Player also latest version but every time adobe crush what to do

i have updated version of Mozilla Firefox 25.0 And adobe flash Player also latest version but every time adobe crush what to do

This is some standard guidance that addresses the most common issues with the Flash Player plugin. I'm sure you've seen some of it before, but just in case:
(1) If you have any recorders/downloaders that interact with Flash media make sure they are as up-to-date as possible, or disable them temporarily.
(2) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode (Windows Vista and higher)
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
Any luck?

SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager

I want to cross check the
SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager
for running of SQL SERVER.
I stop SQLEXPRESS instance in one of the above tools but the others become unaware of the latest changes except
Task Manager.
For example when I stop SQL EXPRESS from within SQL Server Congiguration Manager
it still seems working in Windows Administration Tools, Manage Computer windows.
What is the reason for this?

Hi,
Aprat from SQL Server configuration manager all other are windows tool and should not be used to manage SQL Server in anyway. Although I cannot completely understand list of tools you mentioned
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

BR*Tools 7.0 and 7.1 what Instance Client version 10202 or 10204

Similar Messages

Maybe you are looking for