BR0973W Database operation alert in DB13 - XI Production
Dear All
I am getting following error on DB13 on our XI Prd system..i serch ove the web & SDN but couldnt get any valid reason for this ..can some one assist me in resolving this warning ..
"BR0973W Database operation alert - level: WARNING, operation: sechrknv.dfa, time: 2010-01-08 11.33.19, condition: Last successful 'dfa' operat
BR0973W Database operation alert - level: WARNING, operation: secehvio.tse, time: 2009-12-21 15.56.50, condition: Last 'tse' operation failed
BR0973W Database operation alert - level: WARNING, operation: secdecqf.tse, time: 2009-12-15 14.51.01, condition: Last successful 'tse' operat"
Regards
Buddhike
Hi,
BR0973W Database operation alert - level: WARNING, operation: sechrknv.dfa, time: 2010-01-08 11.33.19, condition: Last successful 'dfa' operat
BR0973W Database operation alert - level: WARNING, operation: secdecqf.tse, time: 2009-12-15 14.51.01, condition: Last successful 'tse' operat"
You are getting some warning messages for different functions which are already performed.
such as,
dfa Alter data file
tse Extend tablespace
which are done by BRSPACE program.
You can ignore these warnigns.
If you check trx DB14, click 'Function ID's you will see where each one comes from.
Run, Clean Up Logs Job from DB13.
And Please Weekly Schedule/Run DB13 T-Code and Run Job - Clean Up Logs.
Using the cleanup parameters in the Initialization Profile init<DBSID>.sap you can determine how old the objects are before they are deleted.
The check conditions are specified in the control table DBCHECKORA. You can change these with transaction DB17
Regards,
Bhavik G. Shroff
Similar Messages
-
DB13 Check, Oracle BR0973W Database operation alert warning
Dear all master and Gurus,
when i run check DB process on DB13 it was completed with following errors. i've serched over googling, SDN, and others but couldnt get any exact answer.
BR0973W Database operation alert - level: WARNING, operation: aeghclvm.dsv, time: 2011-07-09 13.35.38, condition: Last successful 'dsv' operation older than 10 days
BR0973W Database operation alert - level: WARNING, operation: beghcgas.afd, time: 2011-07-09 12.30.18, condition: Last successful 'afd' operation older than 10 days
BR0973W Database operation alert - level: WARNING, operation: beenppkm.aff, time: 2010-11-10 22.35.48, condition: Last successful 'aff' operation older than 10 days
What is the meaning of dsv, afd , and aff?
Should I ignore these warning?
How to resolve ?
Any advise is needed, Thanks
Gustria WekaHi
When a backup of database or archive log is triggered, it writes a log file and the extension is based on the type of backup executed
Names of the BRBACKUP Detail Logs
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/content.htm
Names of the BRARCHIVE Detail Logs
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/frameset.htm
Hope this helps you.
Regards,
SBK -
Oracle BR0973W Database operation alert warning
Hello experts,
I hope you can help me with the following:
In transaction DB13 the checkdb job reports the following errors:
BR0973W Database operation alert - level: WARNING, operation: sdvgirhz.dbp, time: 2007-05-14 15.46.27, condition: Last 'dbp' operation failed with rc = 4
BR0973W Database operation alert - level: WARNING, operation: sduxubpz.tse, time: 2007-03-30 08.58.27, condition: Last 'tse' operation failed with rc = 4
BR0973W Database operation alert - level: WARNING, operation: sduxuaou.dfa, time: 2007-03-30 08.46.40, condition: Last 'dfa' operation failed with rc = 2
I would like to get rid of these messages in dbcheck but can't figure out how to do it.
I searched the notes database, google and this forum and still couldn't find an answer.
Some data regarding oracle and sap versions:
SAP_ABA 700 0009 SAPKA70009 Cross-Application Component
SAP_BASIS 700 0009 SAPKB70009 SAP Basis Component
PI_BASIS 2005_1_700 0006 SAPKIPYJ76 PI_BASIS 2005_1_700
ST-PI 2005_1_700 0003 SAPKITLQI3 SAP Solution Tools Plug-In
SAP_BW 700 0006 SAPKW70006 SAP NetWeaver BI 7.0
SAP_AP 700 0003 SAPKNA7003 SAP Application Platform
BBPCRM 500 0003 SAPKU50003 BBPCRM
ST-A/PI 01I_CRM500 0000 - Application Servicetools for CRM 500
Database system ORACLE
Release 10.2.0.2.0
Thanks in advance for helping.
Regards
Dirk Visserthe operations mentioned were not succesfully done...check the corresponding logfiles
-> dbp = alter database parameter (brspace)
-> tse = extend tablespace (brspace)
-> dfa = alter data file (brspace)
GreetZ, AH -
BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVE
Hi,
While doing DBCheck one of my system i found this error
BR0973W Database operation alert - level: WARNING, operation: cdvkvbva.sta, time: 2007-06-07 06.05.02, condition: Last update optimizer stati
BR0976W Database message alert - level: WARNING, line: 13165, time: 2007-06-07 22.53.58, message:
BR0976W Database message alert - level: WARNING, line: 13184, time: 2007-06-07 22.55.23, message:
BR0976W Database message alert - level: WARNING, line: 13203, time: 2007-06-07 22.57.35, message:
BR0976W Database message alert - level: WARNING, line: 13590, time: 2007-06-08 00.09.04, message:
BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
How to resolve please help what to check in DB17
Thanks
PunitBR0973W Database operation alert - level: WARNING, operation: cdvkvbva.sta, time: 2007-06-07 06.05.02, condition:
After seeing into file we found this error
BR0301E SQL error -20000 in thread 4 at location stats_tab_collect-18, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPR3"', TABNAME => '"/BI0/0P00000025"', ESTIMATE_PERCENT => 10, METHOD_OPT => 'FOR ALL COL
ORA-20000: Unable to analyze TABLE "SAPR3"."/BI0/0P00000025", insufficient privileges or does not exist
ORA-06512: at "SYS.DBMS_STATS", line 13149
ORA-06512: at "SYS.DBMS_STATS", line 13179
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPR3./BI0/0P00000025
BR0976W Database message alert - level: WARNING, line: 13165, time: 2007-06-07 22.53.58, message:
"checkpoint not complete" error
SAP 79341 - Checkpoint not complete
The note which you have suggested is not suited to my environment what are the other possibilities the above error i am facing in one of the server does there i any data loss
Thanks the 3 rd problem is solved
Punit -
Warning in DB13 Check DB "BR0970W Database administration alert"
Hi
We have an alert message in DB13 when we check the checkdb log. Log details are as below
BR0970W Database administration alert - level: WARNING, type: CRITICAL_FILE, object: /oracle/EPR/sapdata10/btabd_11/btabd.data11, value: (max_size) 30466040 KB (> 29439485 KB)
This warning is for all the datafiles; I did just give the sample log above.
Can you please suggest and help resolving this issue?
Thanks in advance.Hi,
The issue here is that there is no enough disk space for the datafiles to extend. In this case you can turn off the auto extend or Increase the disk space of sapdata10 or decrease the max_size or you can move some of the datafiles to other directory or filesystem.
You can turn off the auto extend while the database is online. After turning off the auto extend, you need to monitor the datafile/tablespace size periodically.
Regards,
Varadhu -
Dear SAP Gurus,
We are getting the following error in Check Database in DB13
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14254080 (>< 4096,512 KB)
The current Parameter : 14254080
We have change the parameter as per SAP Note#830576, still the same error is comming.
Kinldy Help.
Thanks in advance.Hi Vijay,
Are you trying to change log_buffer to a smaller size and you can't? If you on Oracle 10g, you won't be able to reduce log_buffer as according to Oracle Metalink 351857.1, "The Log_buffer Default Size Cannot Be Reduced In 10g R2".
If you are concern about the warning in DB13, go to txn DB17 to change the condition will help to get rid of the warning.
Regards,
Annie -
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATIST
Dear all,
We have recently migrated 4.6c/oracle9i/solaris 6800 5.8 to 4.6c/oracle10g/HPUX11.23
After the migration everything was succesfull. Except the below error, when I run a dbcheck from db13.
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g1m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g2m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g4m2.dbf
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQD
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQI
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCRSTATE
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSDATA
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSSTATE
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ATAB
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.CDCLS
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX_DATA40
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DBTABLOG
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDLOG
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTF
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTT
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTF
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTT
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXB
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXC
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.GLSP
Can anyone help us to overcome the above issue
Regards
SenthilThank you Warren. I shall do that reply to you.
Also I have received the below error messages
oracle9i/solaris 6800 5.d to 4.6c(Kernel46D)/oracle10g/hpux11.23.
Everything works fine except the below Three errors:
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
BR0970W Database administration alert - level: WARNING, type: IN_WRONG_TABLESPACE, object: (table) SAPR3.APQD, value: PSAPAPQDD
BR0978W Database profile alert - level: ERROR, parameter: LOG_ARCHIVE_START, value: FALSE (<> TRUE)
Can you help
Regards
Senthil -
BR0970W Database administration alert
I get this error in DB13 in CheckDB, .
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPCRM.VCSMONITOR
Please suggest the fix for this.
Thanks
ShajiHi Markus,
Thanks for your reply.
I checked in SE14, the table VCSMONITOR is Transparent table and the Status is "Not Actve" (Exists in the database).
List of all indexes (constraints) of the table
Index name Unique Short description
0 X Primary index
There are no secondary indexes
Checked for this table/objec in ECC/SRM/BW systems, in SE14 it reports as "object does not exist".
Could you guide me further please.
Regards
Shaji -
Database operations are slow on motorazr
Hi guys,
Database operation like setRecord and addRecord takes too much time in motorzr. Sometimes it take time in minutes which makes application unusable.
Is it the problem with the motorazr only because i haven't encountered this problem in any other phone.
why does setRecord take more time then addRecord?
Please help.hi Sm,
Check this below note for backup using brdb6brt
326691 - DB6: 'BACKUP' & 'REDIRECTED RESTORE' of a DB2 UDB EEE DB
in DB13 there is an option -> Archive inactive log files to Device. Use this to backup into a disk
you can mount the USB dirve as a drive or a file system and take the backup to this location by specifying them while taking the backup.
You may also check this link for DB2 backup and restore
http://www.devx.com/gethelpon/10MinuteSolution/18039/0/page/1
Regards,
chandru -
Dear all:
Running the CheckDB in the transaction DB13 and i get the following
message of error:
"BR0978W Database profile alert - level: WARNING, parameter: DB_BLOCK_CHECKSUM, value: TRUE (<> FALSE)"
Other Details :-
OS :- Win 2003 server
DB :- Oracle 10g
So please help on this issue.
Thanks.
RegardsHi,
Oracle allows customers to use advanced block checking features to enable a higher protection against hardware and software problems.
Also with block checking/checksum turned on, it is absolutely necessary to verify your database. Enabling this feature will only find blocks which are touched (read into the SGA).
Advanced block checking can be enabled by setting either
db_block_checksum = true
or
db_block_checking = true
The reason for this warning is given in the following SAP Note 923919 - Advanced Oracle block checking features
Default recommended by SAP is TRUE.
If this information is helpful please reward points.
Regards,
Suhas -
Ifs-21030 Database operation timed out
Hi,
We have installed cmsdk 9.0.4.2.2 with oas10g 10.1.2.0.2. The application runs fine, but sometimes we got the following error:
[AJPRequestHandler-ApplicationServerThread-6] ERROR cmsdk.CmsdkUtil - Error with gettting document
oracle.ifs.common.IfsException: IFS-21030: Database operation timed out
java.sql.SQLException: ORA-01013: user requested cancel of current operation.
I have set the IFS.SERVICE.SESSION.DefaultSearchTimeoutPeriod, but it doesn't help. Normally the documents are displayed immediately, but when the error occurs, it can take 30 min or more. Mostly, but not always, the error occurs on monday morning, while getting the first or second document after the weekend in which the application is not used. Sometimes the first documents comes up immediately, and the second gives the error.
Are the parameters, agents, sessions, .. to configure to avoid this problem?
Can anyone help me with this?
Regards,
ElsI forgot to mention that we use a webservice. This is the complete error from the OC4J instance, found in the <oracle home>\opmn\logs dir
oracle.ifs.common.IfsException: IFS-21030: Database operation timed out
java.sql.SQLException: ORA-01013: user requested cancel of current operation
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:698)
at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:630)
at oracle.jdbc.driver.T2CPreparedStatement.doDefineExecuteFetch(T2CPreparedStatement.java:1142)
at oracle.jdbc.driver.T2CPreparedStatement.execute_for_rows(T2CPreparedStatement.java:1010)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1022)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1109)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2973)
at oracle.ifs.server.S_LibrarySession.executeQuery(S_LibrarySession.java:16561)
at oracle.ifs.server.S_LibraryObjectSelector.findObjectById(S_LibraryObjectSelector.java:556)
at oracle.ifs.server.S_LibraryObjectSelector.selectObjectById(S_LibraryObjectSelector.java:494)
at oracle.ifs.server.S_LibrarySession.constructLibraryObjectData(S_LibrarySession.java:8024)
at oracle.ifs.server.S_LibrarySession.getLibraryObjectData(S_LibrarySession.java:7811)
at oracle.ifs.server.S_LibrarySession.getLibraryObject(S_LibrarySession.java:8283)
at oracle.ifs.server.S_LibrarySession.getPublicObject(S_LibrarySession.java:8407)
at oracle.ifs.server.S_LibrarySession.DMgetPublicObjectData(S_LibrarySession.java:8051)
at oracle.ifs.beans.LibrarySession.DMgetPublicObjectData(LibrarySession.java:13209)
at oracle.ifs.beans.LibrarySession.getPublicObject(LibrarySession.java:4944)
at be.kindengezin.cmsdk.CmsdkUtil.getDocument(CmsdkUtil.java:74)
at be.kindengezin.cmsdk.CmsdkUtil.getDocumentMimeType(CmsdkUtil.java:91)
at be.kindengezin.cmsdk.content.CmsdkContentServlet.doGet(CmsdkContentServlet.java:41)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
kind regards,
Els -
"Invalid menu operation" Alert bug - CS6
CS6.0.5
In the last couple of weeks I have started getting this alert:
I have tried to pay attention to what I have do to create this alert.
Occasionally it simply appears on opening a Project.
Reliably, it pops up when I hit Ctrl > z (undo), and Ctrl > s (save)...
but after clearing the alert, Ctrl > [Anything] does not make it reappear.
This happens regardless of the Project.
edit:
I have just discovered that if I try to use File > Save
instead of Ctrl > s to save, the alert appears
as soon as I touch the File Menu header.
This also happens with the Clip, Title, Window & Help headers.
As in the replies in the thread below, there seems to be
no detriment to any functionality when this alert appears.
Maybe it's a fairly inconsequential bug, but it does appear to be a bug.
I had worked in CS6 for almost a year without this alert occurring.
Invalid Menu Operation Error in CS6
http://forums.adobe.com/message/4913886Even if this errant "Invalid menu operation" alert is not
indicative of any real problem and does not seem to cause
any functionality problem within Premiere, it is still an obtrusive
alert that requires the extra steps to clear (at least once).
If not cleared, any 'real' alert would be missed since
all it will do is add a new entry to an un-cleared list.
Any suggestions aside from filing additional bug reports? -
IFS-21030 Database Operation time out
Hi everyone,
I really need help with this one. I try to search for a folder with a certain value for a custom attribute. It ALWAYS takes a very long time, but some times it returns successfully and sometimes it gives me a "Database Operation timed out" IFSException.
I tried to change the attribute setting to make it indexed, but it didn't help.
I'm using Oracle Files 9.0.2 (which, I think uses CM SDK 9.0.3, or at least this is the jar I'm using on the client side).
This doesn't happen with all folder queries, just the query where I use the
FolderRestrictQualification.setMultiLevel(true)
Can anyone help me with this?setMultiLevel(true) enables folder recursion, of course, which can be an expensive operation, depending on how many levels deep you need to go.
how many subfolders (and documents) are we talking about here?
.rich -
How to improve perfomance in database operations
In my programme i do some select, insert operations many time. so when i run my program with atlease 80000 customer data it takes 1 hrs to complete the task.
So i switched to use threads. So i use n number of threads and gave a new connection to each thread and splited my customer data for each threads. so each thread contain 80000/n data.
when i check the perfomance both (with and without thread) are equal
so help me to improve the perfomance :)s friend. most of the time it invokes the database operations. i use addbatchs to execute the code. wait i will give the timelines,
:AbstractRuleBasedScenario:run:test2---- is the time to execute the query
:pool-1-thread-1:KYCScenarioTask:call:pool-1-thread-1---- is the time to run a thread
with 1 thread
01/04/07 10-33:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 62
01/04/07 10-33:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 0
01/04/07 10-33:pool-1-thread-1:KYCScenarioTask:call:pool-1-thread-1 ::: 94
01/04/07 10-33:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 63
01/04/07 10-33:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 31
01/04/07 10-33:pool-1-thread-1:KYCScenarioTask:call:pool-1-thread-1 ::: 125
01/04/07 10-33:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 63
01/04/07 10-33:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 0
01/04/07 10-33:pool-1-thread-1:KYCScenarioTask:call:pool-1-thread-1 ::: 109
with 5 threads[
01/04/07 10-29:pool-1-thread-3:AbstractRuleBasedScenario:run:test2 Time:::: 125
01/04/07 10-29:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 125
01/04/07 10-29:pool-1-thread-2:AbstractRuleBasedScenario:run:test2 Time:::: 62
01/04/07 10-29:pool-1-thread-2:KYCScenarioTask:call:pool-1-thread-2 ::: 266
01/04/07 10-29:pool-1-thread-4:AbstractRuleBasedScenario:run:test2 Time:::: 32
01/04/07 10-29:pool-1-thread-3:AbstractRuleBasedScenario:run:test2 Time:::: 63
01/04/07 10-29:pool-1-thread-1:AbstractRuleBasedScenario:run:test2 Time:::: 47
01/04/07 10-29:pool-1-thread-4:KYCScenarioTask:call:pool-1-thread-4 ::: 281
01/04/07 10-29:pool-1-thread-3:KYCScenarioTask:call:pool-1-thread-3 ::: 312
01/04/07 10-29:pool-1-thread-1:KYCScenarioTask:call:pool-1-thread-1 ::: 250 -
How To Disable Verify Database Message Alert
How To Disable Verify Database Message Alert?
I have a VB6 open Crystal Reports using Crystal Reports XI R2 (SP5) and almost every time I open a report, I get an alert message about the table has been changed and I have to click "Ok" to make it goes away. Is there a way to disabled this alert or set default to "Ok" so I do not have to click this message every report. Thank you very much.Hello,
You must verify if the database has changed so you can't disable the message. CR must match what the DB is using or the reports will fail or return wrong data.
It's odd that even after verifying the DB in the designer your app still needs it to be verify the report. You did save the report correct?
Also:
Dim CRApplication As CRAXDDRT.Application
Dim Report As CRAXDDRT.Report
Is the report creation engine and you should be using craxdrt.dll. You need to be licnesed to use craxddrt.dll and this may cause problems for you later when deploying.
Use:
Dim CRApplication As CRAXDRT.Application
Dim Report As CRAXDRT.Report
The mapping is not a switch you can turn on or off but it is Event driven. You need to add code to the viewer section to capture the event if the mapping event fires. Then you can set it to the way you want to use it.
I suggest you purchase a case on line and get to the Report Design team to figure out why when you verify the report your app still thinks it needs to be verified. Something going on in your report that the forum makes it difficult to debug the problem. You can't attach files to forums.
Link to Single Case purchase:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Thank you
Don
Maybe you are looking for
-
How to find purchase order bapi
can any one help how to find purchase order bapi.
-
Hi, After export -> import from one workspace to another in the same database (different schema) the date display is not correct on most pages in the application. In the old workspace the appears as '26-OCT-2009' and on the new it is '26-OCT-0009'. T
-
How to find if one key figure is used in any report
Dear Experts , I have one key figure info object .I wanted to know how to find this key figure is used in which report . As I know "where used list " but this will not help me . Any suggestions please share . Puru
-
Email Issues after installing Froyo
I use the stock email program to connect to my Exchange work server. It worked great in Eclair but since updating to Froyo it just wants to try and load messeges all the time and doesn't remove old messages that were deleted. Any help would be appre
-
Iphoto keeps crashing on my new mac
I bought a brand new mac a couple of weeks ago. Apple's One to One transferred 17000 photos from my pc to my mac. After the first use, iphoto crashed on me. The Apple guy said oh, this can happen, it's a fluke. Blah blah. So he (I guess) reloade