BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, val

Dear SAP Gurus,
We are getting the following error in Check Database in DB13
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14254080 (>< 4096,512 KB)
The current Parameter : 14254080
We have change the parameter as per SAP Note#830576, still the same error is comming.
Kinldy Help.
Thanks in advance.

Hi Vijay,
Are you trying to change log_buffer to a smaller size and you can't? If you on Oracle 10g, you won't be able to reduce log_buffer as according to Oracle Metalink 351857.1, "The Log_buffer Default Size Cannot Be Reduced In 10g R2".
If you are concern about the warning in DB13, go to txn DB17 to change the condition will help to get rid of the warning.
Regards,
Annie

Similar Messages

BR0978W Database profile alert - level: WARNING, parameter: DB_BLOCK_CHECKS

Dear all:
Running the CheckDB in the transaction DB13 and i get the following
message of error:
"BR0978W Database profile alert - level: WARNING, parameter: DB_BLOCK_CHECKSUM, value: TRUE (<> FALSE)"
Other Details :-
OS :- Win 2003 server
DB :- Oracle 10g
So please help on this issue.
Thanks.
Regards

Hi,
Oracle allows customers to use advanced block checking features to enable a higher protection against hardware and software problems.
Also with block checking/checksum turned on, it is absolutely necessary to verify your database. Enabling this feature will only find blocks which are touched (read into the SGA).
Advanced block checking can be enabled by setting either
db_block_checksum = true
or
db_block_checking = true
The reason for this warning is given in the following SAP Note 923919 - Advanced Oracle block checking features
Default recommended by SAP is TRUE.
If this information is helpful please reward points.
Regards,
Suhas

BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVE

Hi,
While doing DBCheck one of my system i found this error
BR0973W Database operation alert - level: WARNING, operation: cdvkvbva.sta, time: 2007-06-07 06.05.02, condition: Last update optimizer stati
BR0976W Database message alert - level: WARNING, line: 13165, time: 2007-06-07 22.53.58, message:
BR0976W Database message alert - level: WARNING, line: 13184, time: 2007-06-07 22.55.23, message:
BR0976W Database message alert - level: WARNING, line: 13203, time: 2007-06-07 22.57.35, message:
BR0976W Database message alert - level: WARNING, line: 13590, time: 2007-06-08 00.09.04, message:
BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
How to resolve please help what to check in DB17
Thanks
Punit

BR0973W Database operation alert - level: WARNING, operation: cdvkvbva.sta, time: 2007-06-07 06.05.02, condition:
After seeing into file we found this error
BR0301E SQL error -20000 in thread 4 at location stats_tab_collect-18, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPR3"', TABNAME => '"/BI0/0P00000025"', ESTIMATE_PERCENT => 10, METHOD_OPT => 'FOR ALL COL
ORA-20000: Unable to analyze TABLE "SAPR3"."/BI0/0P00000025", insufficient privileges or does not exist
ORA-06512: at "SYS.DBMS_STATS", line 13149
ORA-06512: at "SYS.DBMS_STATS", line 13179
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPR3./BI0/0P00000025
BR0976W Database message alert - level: WARNING, line: 13165, time: 2007-06-07 22.53.58, message:
"checkpoint not complete" error
SAP 79341 - Checkpoint not complete
The note which you have suggested is not suited to my environment what are the other possibilities the above error i am facing in one of the server does there i any data loss
Thanks the 3 rd problem is solved
Punit

BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX

Hai Experts
When I executes DBChek i am getting following error
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (<= 20)
already checked the database parameter for OPTIMIZER_INDEX_COST_ADJ is 20,
Thanks in advance
KHS

Hello,
Please, read slowly the message you are getting:
K Hari Shankar wrote:
> BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (<= 20)
Lets try to understand it.
1.- It is telling you that your parameter is currently set to 20 (and that is a correct value as per relevant SAP note that you have checked)
2.- it is telling you that the current value is lower or equal to a specified valued to be checked against (<=20)
so, what could be the "problem", your parameter setting is OK, and the check is telling you the true, but you do not want the "warning"
perhaps the check is not properly configured?
of course 0.o
it should be checking if the value is different than 20, not lower or equal to 20
therefore, you have to change the check
this is done with DB17, go to that transdaction and change the check (perhaps it is DB16, right now I'm not 100% sure which one is display and which one is for change)

BR0978W Database profile alert

Hi,
DB02-----> Check DB it's showing these warnings.
Please checks it and suggest me.
BR0978W Database profile alert - level: WARNING, parameter: DB_WRITER_PROCESSES, value: 4 (<> 1)
BR0978W Database profile alert - level: WARNING, parameter: LOG_CHECKPOINT_INTERVAL, value: 0 (< 300000)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 9.2.0 (<> 8.1.7)
Regards
S.Prasad

Hello Prasad,
Well the parameter recommendation is depends on the database version and SAP release version.
Using the relevant parameter notes for the affected system (Oracle 9i and lower: Note 124361 and 180605 (BW); Oracle 10g and higher: 830576), check whether the settings (<curr_val>) you are using are actually correct. If so, use transaction DB17 to change the <check_val> test values for the affected parameters to the correct <curr_val> value, to avoid future unjustified warnings. Alternatively, you can also deactivate or delete the checks in DB17 (Active = "N").
If warnings are issued correctly, you must adjust the parameter settings in init<sid>.ora (and, if necessary, the other configuration files included there using IFILE).
Best Regards,
Madhukar

BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATIST

Dear all,
We have recently migrated 4.6c/oracle9i/solaris 6800 5.8 to 4.6c/oracle10g/HPUX11.23
After the migration everything was succesfull. Except the below error, when I run a dbcheck from db13.
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g1m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g2m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g4m2.dbf
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQD
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQI
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCRSTATE
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSDATA
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSSTATE
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ATAB
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.CDCLS
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX_DATA40
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DBTABLOG
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDLOG
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTF
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTT
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTF
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTT
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXB
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXC
BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.GLSP
Can anyone help us to overcome the above issue
Regards
Senthil

Thank you Warren. I shall do that reply to you.
Also I have received the below error messages
oracle9i/solaris 6800 5.d to 4.6c(Kernel46D)/oracle10g/hpux11.23.
Everything works fine except the below Three errors:
BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
BR0970W Database administration alert - level: WARNING, type: IN_WRONG_TABLESPACE, object: (table) SAPR3.APQD, value: PSAPAPQDD
BR0978W Database profile alert - level: ERROR, parameter: LOG_ARCHIVE_START, value: FALSE (<> TRUE)
Can you help
Regards
Senthil

Oracle BR0973W Database operation alert warning

Hello experts,
I hope you can help me with the following:
In transaction DB13 the checkdb job reports the following errors:
BR0973W Database operation alert - level: WARNING, operation: sdvgirhz.dbp, time: 2007-05-14 15.46.27, condition: Last 'dbp' operation failed with rc = 4
BR0973W Database operation alert - level: WARNING, operation: sduxubpz.tse, time: 2007-03-30 08.58.27, condition: Last 'tse' operation failed with rc = 4
BR0973W Database operation alert - level: WARNING, operation: sduxuaou.dfa, time: 2007-03-30 08.46.40, condition: Last 'dfa' operation failed with rc = 2
I would like to get rid of these messages in dbcheck but can't figure out how to do it.
I searched the notes database, google and this forum and still couldn't find an answer.
Some data regarding oracle and sap versions:
SAP_ABA     700     0009     SAPKA70009     Cross-Application Component
SAP_BASIS     700     0009     SAPKB70009     SAP Basis Component
PI_BASIS     2005_1_700     0006     SAPKIPYJ76     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0003     SAPKITLQI3     SAP Solution Tools Plug-In
SAP_BW     700     0006     SAPKW70006     SAP NetWeaver BI 7.0
SAP_AP     700     0003     SAPKNA7003     SAP Application Platform
BBPCRM     500     0003     SAPKU50003     BBPCRM
ST-A/PI     01I_CRM500     0000          -     Application Servicetools for CRM 500
Database system      ORACLE
Release              10.2.0.2.0
Thanks in advance for helping.
Regards
Dirk Visser

the operations mentioned were not succesfully done...check the corresponding logfiles
-> dbp = alter database parameter (brspace)
-> tse = extend tablespace (brspace)
-> dfa = alter data file (brspace)
GreetZ, AH

DB13 Check, Oracle BR0973W Database operation alert warning

Dear all master and Gurus,
when i run check DB process on DB13 it was completed with following errors. i've serched over googling, SDN, and others but couldnt get any exact answer.
BR0973W Database operation alert - level: WARNING, operation: aeghclvm.dsv, time: 2011-07-09 13.35.38, condition: Last successful 'dsv' operation older than 10 days
BR0973W Database operation alert - level: WARNING, operation: beghcgas.afd, time: 2011-07-09 12.30.18, condition: Last successful 'afd' operation older than 10 days
BR0973W Database operation alert - level: WARNING, operation: beenppkm.aff, time: 2010-11-10 22.35.48, condition: Last successful 'aff' operation older than 10 days
What is the meaning of dsv, afd , and aff?
Should I ignore these warning?
How to resolve ?
Any advise is needed, Thanks
Gustria Weka

Hi
When a backup of database or archive log is triggered, it writes a log file and the extension is based on the type of backup executed
Names of the BRBACKUP Detail Logs
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/content.htm
Names of the BRARCHIVE Detail Logs
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/frameset.htm
Hope this helps you.
Regards,
SBK

Warning in DB13 Check DB "BR0970W Database administration alert"

Hi
We have an alert message in DB13 when we check the checkdb log. Log details are as below
BR0970W Database administration alert - level: WARNING, type: CRITICAL_FILE, object: /oracle/EPR/sapdata10/btabd_11/btabd.data11, value: (max_size) 30466040 KB (> 29439485 KB)
This warning is for all the datafiles; I did just give the sample log above.
Can you please suggest and help resolving this issue?
Thanks in advance.

Hi,
The issue here is that there is no enough disk space for the datafiles to extend. In this case you can turn off the auto extend or Increase the disk space of sapdata10 or decrease the max_size or you can move some of the datafiles to other directory or filesystem.
You can turn off the auto extend while the database is online. After turning off the auto extend, you need to monitor the datafile/tablespace size periodically.
Regards,
Varadhu

BR0973W Database operation alert in DB13 - XI Production

Dear All
I am getting following error on DB13 on our XI Prd system..i serch ove the web & SDN but couldnt get any valid reason for this ..can some one assist me in resolving this warning ..
"BR0973W Database operation alert - level: WARNING, operation: sechrknv.dfa, time: 2010-01-08 11.33.19, condition: Last successful 'dfa' operat
BR0973W Database operation alert - level: WARNING, operation: secehvio.tse, time: 2009-12-21 15.56.50, condition: Last 'tse' operation failed
BR0973W Database operation alert - level: WARNING, operation: secdecqf.tse, time: 2009-12-15 14.51.01, condition: Last successful 'tse' operat"
Regards
Buddhike

Hi,
BR0973W Database operation alert - level: WARNING, operation: sechrknv.dfa, time: 2010-01-08 11.33.19, condition: Last successful 'dfa' operat
BR0973W Database operation alert - level: WARNING, operation: secdecqf.tse, time: 2009-12-15 14.51.01, condition: Last successful 'tse' operat"
You are getting some warning messages for different functions which are already performed.
such as,
dfa Alter data file
tse Extend tablespace
which are done by BRSPACE program.
You can ignore these warnigns.
If you check trx DB14, click 'Function ID's you will see where each one comes from.
Run, Clean Up Logs Job from DB13.
And Please Weekly Schedule/Run DB13 T-Code and Run Job - Clean Up Logs.
Using the cleanup parameters in the Initialization Profile init<DBSID>.sap you can determine how old the objects are before they are deleted.
The check conditions are specified in the control table DBCHECKORA. You can change these with transaction DB17
Regards,
Bhavik G. Shroff

SAP database check finished with warning

Hello All,
In sapcheck folder latest .chk file finished with following warnings
BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
BR0972I Checking database operations...
BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
Kindly help me resolve the issue.
Regards
Mohsin

>
mohsin m wrote:
> Hello All,
>
> In sapcheck folder latest .chk file finished with following warnings
>
> BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
> BR0972I Checking database operations...
> BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
>
> Kindly help me resolve the issue.
>
> Regards
> Mohsin
Hello,
The warning occurs because the database check looks for the logs of all old operations that ended with an error. The text "Last 'log' operation" means: an operation log with the extension ".log"was found for an action that ended with the (error) status RC = 3.
Since the log referred to is old (January 17), you can get rid of it by running:
brconnect -u / -c force -f cleanup -m 60
(60 is the minimum age of the logs to clean up; adapt this value to your requirements)
Also, it is a good idea to schedule the action "Cleanup logs" periodically via DB13.
Regards,
Mark

Database administration alert

Hi
here i am posting the issue as below:
BR970W Database administration alert - level: WARNING, type: CRITICAL_SEGS, object: (table) SAPR3./BMC/YGR_AVAILAB, value: 640 K
as i checked with SAPDBA -f, i am getting an error
a - Tablespace: PSAPYBMCD
b - Log checks: no
       c - Free space and fragmentation of all tablespaces
       d - Check   free space of objects in all tablespaces
       e - Check   free space of objects in tablespace PSAPYBMCD
       f - Alter   tablespace PSAPYBMCD add data/temp file
       g - Drop    tablespace PSAPYBMCD
       h - Display all tablespaces and data/temp files
       r - Display raw device drivers in /dev
       q - Return
       Please select ==> f
SAPDBA: Error getting file system space information of
        '/oracle/sid/sapdata7'.
        (Such entry does not exist.)
        Press <return> to continue ...
as i checked.............
bdf | grep /oracle/sid
/oracle/SID/sapdata1
so my Q is how to change the filesystem to /oracle/SID/sapdata1 from sapdata7.
sap : 4.6c
oracle : 9.2.0.8.0
os    : hp-ux
so can anyone help me in changing the filesystem path?
Thanks in advances

Hi,
It seems that environment variable SAPDATA<n> are not comfiture properly?
But why dont use brspace?
e.g. +brspace f tsextend -t PSAPYBMCD -f SAPDATA1 -s <size>+
Nahum

Delete Parameter from Database profile

Hi forums, I have a doubt. I have SAP BW 7.0 on Windows with Oracle 10.2.0.2.
The session of GoLive recommend me the following:
Parameter:
shared_pool_reserved_size
Description:
Part of Shared Pool for large statements
Current Value:
47799336
Recommended value:
Delete this parameter name and value from database profile
I delete this parameter from SPFILE, I shutdown the DB and restart ok.
Then I see that this parameter isn't in my SPFILE, but I consult this parameter with SHOW command and it has a value.
SQL> show parameter shared_pool_reserved_size
NAME                                 TYPE        VALUE
shared_pool_reserved_size            big integer 8178892
Why this parameter is active still in oracle?
Is normal this action?
Regards.
CG

Hello Gustavo,
> Why this parameter is active still in oracle?
> Is normal this action?
Yes, this is completely normal, because of most / every parameter has its default value. So if you don't specify the parameter in the pfile/spfile, you have the default value which is set or calculated by oracle.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams196.htm#i1133799
Default value      5% of the value of SHARED_POOL_SIZE
Regards
Stefan

BR0970W Database administration alert

I get this error in DB13 in CheckDB, .
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPCRM.VCSMONITOR
Please suggest the fix for this.
Thanks
Shaji

Hi Markus,
Thanks for your reply.
I checked in SE14, the table VCSMONITOR is Transparent table and the Status is "Not Actve" (Exists in the database).
                       List of all indexes (constraints) of the table
                       Index name Unique Short description
0          X      Primary index
                       There are no secondary indexes
Checked for this table/objec in ECC/SRM/BW systems, in SE14 it reports as "object does not exist".
Could you guide me further please.
Regards
Shaji

FRM-47013 error: Cannot add parameter P LEVEL to Parameter List REPDATA: pa

Hello! I am using Forms 6i and get the above error-FRM-47013 error: Cannot add parameter P LEVEL to Parameter List REPDATA: parameter with this name exists. when clicking on the Run Report button on a parameter form. I have googled and I'm doing everything I know to do, but cannot get rid of the error. Any help is greatly appreciated! I only have 3 months Oracle experience coming from a VB/C# background.
Here's my code that is on the Run Report Program Unit on the parameter form:
PROCEDURE run_report IS
pl_id ParamList;
pl_name VARCHAR2(10) := 'repdata';
v_rep_num number;
hold_where_clause varchar2(2000);
charFY                                                  varchar2(4);
the_connect varchar2(10);
CharAlertText          varchar2(300); --Alert message text
     NumAlertVal      number; --Alert prompt
begin
     if :CONTROL.BEGINNING_FISCAL_YEAR is null or :CONTROL.ENDING_FISCAL_YEAR is null then
                    CharAlertText := 'You must enter Beginning and Ending Fiscal Years before running this report!';
                    set_alert_button_property('ALERT_1',ALERT_BUTTON1,LABEL,'Ok'); --alert value equals 88
                    set_alert_property('ALERT_1',title,'No Year');
                    set_alert_property('ALERT_1',alert_message_text,CharAlertText);
                    NumAlertVal :=show_alert('ALERT_1');
                    raise form_trigger_failure;
     end if;
     if :CONTROL.BEGINNING_FISCAL_YEAR > :CONTROL.ENDING_FISCAL_YEAR then
                    CharAlertText := 'You must enter an Ending Year Fiscal Year greater than or equal to Beginning Year!';
                    set_alert_button_property('ALERT_1',ALERT_BUTTON1,LABEL,'Ok'); --alert value equals 88
                    set_alert_property('ALERT_1',title,'Invalid Year');
                    set_alert_property('ALERT_1',alert_message_text,CharAlertText);
                    NumAlertVal :=show_alert('ALERT_1');
                    raise form_trigger_failure;
     end if;
--This section creates system identified parameter list.
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF Not Id_Null(pl_id) THEN
Destroy_Parameter_List(pl_name);
--pl_id := Create_Parameter_List(pl_name);
--IF Id_Null(pl_id) THEN
--Message('Error creating parameter list '||pl_name);
--RAISE Form_Trigger_Failure;
--END IF;
END IF;
pl_id := Create_Parameter_List(pl_name);
Add_parameter(pl_id,'P_LEVEL',text_parameter,:control.hierarchy);
IF Id_Null(pl_id) THEN
Message('Error creating parameter list '||pl_name);
RAISE Form_Trigger_Failure;
END IF;
END;
--End section that creates parameter list.
BEGIN
-- This will get the next sequence number from the database to make the
-- report file name unique
select ombil.report_seq.nextval
into v_rep_num
from dual;
exception when no_data_found then
display_error_text(203,'S','N');
raise form_trigger_failure;
END;
If :control.hierarchy = 1 then
hold_where_clause := ' ';
elsif :control.hierarchy = 2 then
     hold_where_clause := ' AND DIV.ID = ' || :control.division_poplist ||' ';
elsif :control.hierarchy = 3 then
hold_where_clause := ' AND DIST.ID = ' || :control.district_poplist ||' ';
elsif :control.hierarchy = 4 then
          hold_where_clause := ' AND PS.ID = ' || :control.psite_poplist ||' ';
elsif :control.hierarchy = 5 then
hold_where_clause := ' AND PS.ID IN ' || :CONTROL.MULTI_PROJECT_SITES ||' ';
end if;
--charFY := 'where to_char(MP.fiscal_year, ''RRRR'') = to_char(:CONTROL.FISCAL_YEAR, ''RRRR'')';
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'FILE');
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,:global.cur_reports_path||to_char(v_rep_num)||'.'||:control.format);
Add_parameter(pl_id,'P_WHERE',text_parameter,hold_where_clause);
Add_parameter(pl_id,'P_FY_BEGIN',text_parameter, to_char(:CONTROL.BEGINNING_FISCAL_YEAR, 'DD-MON-YYYY'));
Add_parameter(pl_id,'P_FY_END',text_parameter, to_char(:CONTROL.ENDING_FISCAL_YEAR, 'DD-MON-YYYY'));
--Add_parameter(pl_id,'P_LEVEL',text_parameter,:control.hierarchy);
/*if :control.format = 'CSV' then
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED');
          Add_Parameter(pl_id,'DELIMITER',TEXT_PARAMETER,',');
                    run_product(REPORTS,'es_adm_mit_percent_csv.rep',SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id,NULL);
else */
          --Add_parameter(pl_id,'P_LEVEL',text_parameter,:control.hierarchy);
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,:control.format);
     --end if;
run_product(REPORTS,'es_fish_mit_reqs.rep',SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id,NULL);
--Destroy_Parameter_List(pl_id);
web.show_document(:global.cur_reports_url||to_char(v_rep_num)||'.'||:control.format,'_SELF');
exception when others then
display_error_text(202,'S','N');
end;
Edited by: [email protected] on Feb 27, 2009 6:35 AM

A coworker figured out that the switchboard data input form was pointed at the wrong executable file. I knew there wasn't anything wrong with my code! I'll remember this one next time!
Edited by: [email protected] on Feb 27, 2009 12:24 PM

BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, val

Similar Messages

Maybe you are looking for