BR0978W Database profile alert

Hi,
DB02-----> Check DB it's showing these warnings.
Please checks it and suggest me.
BR0978W Database profile alert - level: WARNING, parameter: DB_WRITER_PROCESSES, value: 4 (<> 1)                
BR0978W Database profile alert - level: WARNING, parameter: LOG_CHECKPOINT_INTERVAL, value: 0 (< 300000)        
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 9.2.0 (<> 8.1.7)  
Regards
S.Prasad

Hello Prasad,
Well the parameter recommendation is depends on the database version and SAP release version.
Using the relevant parameter notes for the affected system (Oracle 9i  and lower: Note 124361 and 180605 (BW); Oracle 10g and higher: 830576),  check whether the settings (<curr_val>) you are using are actually  correct. If so, use transaction DB17 to change the <check_val> test  values for the affected parameters to the correct <curr_val> value, to  avoid future unjustified warnings. Alternatively, you can also deactivate or delete the checks in DB17 (Active = "N").
If warnings are issued correctly, you must adjust the parameter settings  in init<sid>.ora (and, if necessary, the other configuration files included there using IFILE).
Best Regards,
Madhukar

Similar Messages

  • BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, val

    Dear SAP Gurus,
    We are getting the following error in Check Database in DB13
    BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14254080 (>< 4096,512 KB)
    The current Parameter : 14254080
    We have change the parameter as per SAP Note#830576, still the same error is comming.
    Kinldy Help.
    Thanks in advance.

    Hi Vijay,
    Are you trying to change log_buffer to a smaller size and you can't? If you on Oracle 10g, you won't be able to reduce log_buffer as according to Oracle Metalink 351857.1, "The Log_buffer Default Size Cannot Be Reduced In 10g R2".
    If you are concern about the warning in DB13, go to txn DB17 to change the condition will help to get rid of the warning.
    Regards,
    Annie

  • BR0978W Database profile alert - level: WARNING, parameter: DB_BLOCK_CHECKS

    Dear all:
    Running the CheckDB in the transaction DB13 and i get the following
    message of error:
    "BR0978W Database profile alert - level: WARNING, parameter: DB_BLOCK_CHECKSUM, value: TRUE (<> FALSE)"
    Other Details :-
    OS :- Win 2003 server
    DB :- Oracle 10g
    So please help on this issue.
    Thanks.
    Regards

    Hi,
    Oracle allows customers to use advanced block checking features to enable a higher protection against hardware and software problems.
    Also with block checking/checksum turned on, it is absolutely necessary to verify your database. Enabling this feature will only find blocks which are touched (read into the SGA).
    Advanced block checking can be enabled by setting either
    db_block_checksum = true
    or
    db_block_checking = true
    The reason for this warning is given in the following SAP Note 923919 - Advanced Oracle block checking features
    Default recommended by SAP is TRUE.
    If this information is helpful please reward points.
    Regards,
    Suhas

  • BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVE

    Hi,
    While doing DBCheck one of my system i found this error
    BR0973W Database operation alert - level: WARNING, operation: cdvkvbva.sta, time: 2007-06-07 06.05.02, condition: Last update optimizer stati
    BR0976W Database message alert - level: WARNING, line: 13165, time: 2007-06-07 22.53.58, message:
    BR0976W Database message alert - level: WARNING, line: 13184, time: 2007-06-07 22.55.23, message:
    BR0976W Database message alert - level: WARNING, line: 13203, time: 2007-06-07 22.57.35, message:
    BR0976W Database message alert - level: WARNING, line: 13590, time: 2007-06-08 00.09.04, message:
    BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
    How to resolve please help what to check in DB17
    Thanks
    Punit

    BR0973W Database operation alert - level: WARNING, operation: cdvkvbva.sta, time: 2007-06-07 06.05.02, condition:
    After seeing into file we found this error
    BR0301E SQL error -20000 in thread 4 at location stats_tab_collect-18, SQL statement:                                        
    'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPR3"', TABNAME => '"/BI0/0P00000025"', ESTIMATE_PERCENT => 10, METHOD_OPT => 'FOR ALL COL
    ORA-20000: Unable to analyze TABLE "SAPR3"."/BI0/0P00000025", insufficient privileges or does not exist                      
    ORA-06512: at "SYS.DBMS_STATS", line 13149                                                                               
    ORA-06512: at "SYS.DBMS_STATS", line 13179                                                                               
    ORA-06512: at line 1                                                                               
    BR0886E Checking/collecting statistics failed for table SAPR3./BI0/0P00000025
    BR0976W Database message alert - level: WARNING, line: 13165, time: 2007-06-07 22.53.58, message:
    "checkpoint not complete" error
    SAP 79341 - Checkpoint not complete
    The note which you have suggested is not suited to my environment what are the other possibilities the above error i am facing in one of the server does there i any data loss
    Thanks the 3 rd problem is solved
    Punit

  • BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX

    Hai Experts
    When I executes DBChek i am getting following error
    BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (<= 20)
    already checked the database parameter for OPTIMIZER_INDEX_COST_ADJ is 20,
    Thanks in advance
    KHS

    Hello,
    Please, read slowly the message you are getting:
    K Hari Shankar wrote:
    > BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (<= 20)
    Lets try to understand it.
    1.- It is telling you that your parameter is currently set to 20 (and that is a correct value as per relevant SAP note that you have checked)
    2.- it is telling you that the current value is lower or equal to a specified valued to be checked against (<=20)
    so, what could be the "problem", your parameter setting is OK, and the check is telling you the true, but you do not want the "warning"
    perhaps the check is not properly configured?
    of course 0.o
    it should be checking if the value is different than 20, not lower or equal to 20
    therefore, you have to change the check
    this is done with DB17, go to that transdaction and change the check (perhaps it is DB16, right now I'm not 100% sure which one is display and which one is for change)

  • BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATIST

    Dear all,
    We have recently migrated 4.6c/oracle9i/solaris 6800 5.8 to 4.6c/oracle10g/HPUX11.23
    After the migration everything was succesfull. Except the below error, when I run a dbcheck from db13.
    BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g1m2.dbf     
    BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g2m2.dbf     
    BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf     
    BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogB/log_g4m2.dbf     
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQD              
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.APQI              
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCRSTATE        
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSDATA         
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ARFCSSTATE        
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.ATAB              
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.CDCLS             
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX              
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.COIX_DATA40       
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DBTABLOG          
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDLOG             
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTF             
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDNTT             
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTF             
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.DDXTT             
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXB            
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.EPIDXC            
    BR0970W Database administration alert - level: ERROR, type: HARMFUL_STATISTICS, object: (table) SAPR3.GLSP
    Can anyone help us  to overcome the above issue
    Regards
    Senthil

    Thank you Warren. I shall do that reply to you.
    Also I have received the below error messages
    oracle9i/solaris 6800 5.d to 4.6c(Kernel46D)/oracle10g/hpux11.23.
    Everything works fine except the below Three errors:
    BR0970W Database administration alert - level: ERROR, type: FILE_OFFLINE, object: /oracle/DV2/mirrlogA/log_g3m2.dbf
    BR0970W Database administration alert - level: WARNING, type: IN_WRONG_TABLESPACE, object: (table) SAPR3.APQD, value: PSAPAPQDD
    BR0978W Database profile alert - level: ERROR, parameter: LOG_ARCHIVE_START, value: FALSE (<> TRUE)
    Can you help
    Regards
    Senthil

  • BR0973W Database operation alert in DB13 - XI Production

    Dear All
    I am getting following error on DB13 on our XI Prd system..i serch ove the web & SDN but couldnt get any valid reason for this ..can some one assist me in resolving this warning ..
    "BR0973W Database operation alert - level: WARNING, operation: sechrknv.dfa, time: 2010-01-08 11.33.19, condition: Last successful 'dfa' operat
    BR0973W Database operation alert - level: WARNING, operation: secehvio.tse, time: 2009-12-21 15.56.50, condition: Last 'tse' operation failed
    BR0973W Database operation alert - level: WARNING, operation: secdecqf.tse, time: 2009-12-15 14.51.01, condition: Last successful 'tse' operat"
    Regards
    Buddhike

    Hi,
    BR0973W Database operation alert - level: WARNING, operation: sechrknv.dfa, time: 2010-01-08 11.33.19, condition: Last successful 'dfa' operat
    BR0973W Database operation alert - level: WARNING, operation: secdecqf.tse, time: 2009-12-15 14.51.01, condition: Last successful 'tse' operat"
    You are getting some warning messages for different functions which are already performed.
    such as,
    dfa     Alter data file
    tse      Extend tablespace
    which are done by BRSPACE program.
    You can ignore these warnigns.
    If you check trx DB14, click 'Function ID's you will see where each one comes from.
    Run, Clean Up Logs Job from DB13.
    And Please Weekly Schedule/Run DB13 T-Code and Run Job - Clean Up Logs.
    Using the cleanup parameters in the Initialization Profile init<DBSID>.sap you can determine how old the objects are before they are deleted.
    The check conditions are specified in the control table DBCHECKORA. You can change these with transaction DB17
    Regards,
    Bhavik G. Shroff

  • How to remove database profile in report

    Hello,
    We have a report right now and upon accessing it, a window asking for a Database Profile comes out. This causes the program to have additional selection parameters for Project Definiton, WBS element etc.
    Before we just ran the report for Period, Year, Cost Center Group. Ever since the Database Profile appeared we now have to put * in the WBS element so that the report will run.
    Anyone know how to remove the Database Profile selection? One of our users reported that this wasn't in the selection parameters and our developer said there were no changes to the report.
    Are there possible reasons why the Database Profile suddenly appeared?
    FYI, the report was created using Report Groups (GR51/2/3)
    Thanks.

    Hi,
    What selection criteria you need?
    Database profile is needed to access objects from Logical PS DB. You have to put at least one selection object viz. Project Definition or WBS, or Network or Activity.
    Create one of your own profile as per requirements and default it in user param.
    Regards,
    Harsh.
    Edited by: Harsh Saxena on Jul 8, 2011 1:13 PM

  • How To Disable Verify Database Message Alert

    How To Disable Verify Database Message Alert?
    I have a VB6 open Crystal Reports using Crystal Reports XI R2 (SP5) and almost every time I open a report, I get an alert message about the table has been changed and I have to click "Ok" to make it goes away. Is there a way to  disabled this alert or set default to "Ok" so I do not have to  click this message every report. Thank you very  much.

    Hello,
    You must verify if the database has changed so you can't disable the message. CR must match what the DB is using or the reports will fail or return wrong data.
    It's odd that even after verifying the DB in the designer your app still needs it to be verify the report. You did save the report correct?
    Also:
    Dim CRApplication As CRAXDDRT.Application
    Dim Report As CRAXDDRT.Report
    Is the report creation engine and you should be using craxdrt.dll. You need to be licnesed to use craxddrt.dll and this may cause problems for you later when deploying.
    Use:
    Dim CRApplication As CRAXDRT.Application
    Dim Report As CRAXDRT.Report
    The mapping is not a switch you can turn on or off but it is Event driven. You need to add code to the viewer section to capture the event if the mapping event fires. Then you can set it to the way you want to use it.
    I suggest you purchase a case on line and get to the Report Design team to figure out why when you verify the report your app still thinks it needs to be verified. Something going on in your report that the forum makes it difficult to debug the problem. You can't attach files to forums.
    Link to Single Case purchase:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Thank you
    Don

  • Oracle BR0973W Database operation alert warning

    Hello experts,
    I hope you can help me with the following:
    In transaction DB13 the checkdb job reports the following errors:
    BR0973W Database operation alert - level: WARNING, operation: sdvgirhz.dbp, time: 2007-05-14 15.46.27, condition: Last 'dbp' operation failed with rc = 4
    BR0973W Database operation alert - level: WARNING, operation: sduxubpz.tse, time: 2007-03-30 08.58.27, condition: Last 'tse' operation failed with rc = 4
    BR0973W Database operation alert - level: WARNING, operation: sduxuaou.dfa, time: 2007-03-30 08.46.40, condition: Last 'dfa' operation failed with rc = 2
    I would like to get rid of these messages in dbcheck but can't figure out how to do it.
    I searched the notes database, google and this forum and still couldn't find an answer.
    Some data regarding oracle and sap versions:
    SAP_ABA     700     0009     SAPKA70009     Cross-Application Component
    SAP_BASIS     700     0009     SAPKB70009     SAP Basis Component
    PI_BASIS     2005_1_700     0006     SAPKIPYJ76     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     0003     SAPKITLQI3     SAP Solution Tools Plug-In
    SAP_BW     700     0006     SAPKW70006     SAP NetWeaver BI 7.0
    SAP_AP     700     0003     SAPKNA7003     SAP Application Platform
    BBPCRM     500     0003     SAPKU50003     BBPCRM
    ST-A/PI     01I_CRM500     0000          -     Application Servicetools for CRM 500
    Database system      ORACLE   
    Release              10.2.0.2.0
    Thanks in advance for helping.
    Regards
    Dirk Visser

    the operations mentioned were not succesfully done...check the corresponding logfiles
    -> dbp = alter database parameter (brspace)
    -> tse = extend tablespace (brspace)
    -> dfa = alter data file (brspace)
    GreetZ, AH

  • Delete Parameter from Database profile

    Hi forums, I have a doubt. I have SAP BW 7.0 on Windows with Oracle 10.2.0.2.
    The session of GoLive recommend me the following:
    Parameter:
    shared_pool_reserved_size
    Description:
    Part of Shared Pool for large statements     
    Current Value:
    47799336     
    Recommended value:
    Delete this parameter name and value from database profile
    I delete this parameter from SPFILE, I shutdown the DB and restart ok.
    Then I see that this parameter isn't in my SPFILE, but I consult this parameter with SHOW command and it has a value.
    SQL> show parameter shared_pool_reserved_size 
    NAME                                 TYPE        VALUE 
    shared_pool_reserved_size            big integer 8178892 
    Why this parameter is active still in oracle?
    Is normal this action?
    Regards.
    CG

    Hello Gustavo,
    > Why this parameter is active still in oracle?
    > Is normal this action?
    Yes, this is completely normal, because of most / every parameter has its default value. So if you don't specify the parameter in the pfile/spfile, you have the default value which is set or calculated by oracle.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams196.htm#i1133799
    Default value      5% of the value of SHARED_POOL_SIZE
    Regards
    Stefan

  • DB13 Check, Oracle BR0973W Database operation alert warning

    Dear all master and Gurus,
    when i run check DB process on DB13 it was completed with following errors. i've serched over googling, SDN, and others but couldnt get any exact answer.
    BR0973W Database operation alert - level: WARNING, operation: aeghclvm.dsv, time: 2011-07-09 13.35.38, condition: Last successful 'dsv' operation older than 10 days
    BR0973W Database operation alert - level: WARNING, operation: beghcgas.afd, time: 2011-07-09 12.30.18, condition: Last successful 'afd' operation older than 10 days
    BR0973W Database operation alert - level: WARNING, operation: beenppkm.aff, time: 2010-11-10 22.35.48, condition: Last successful 'aff' operation older than 10 days
    What is the meaning of dsv, afd , and aff?
    Should I ignore these warning?
    How to resolve ?
    Any advise is needed, Thanks
    Gustria Weka

    Hi
    When a backup of database or archive log is triggered, it writes a log file and the extension is based on the type of backup executed
    Names of the BRBACKUP Detail Logs
    http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/content.htm
    Names of the BRARCHIVE Detail Logs
    http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/0d/d30ec54a0c11d182b80000e829fbfe/frameset.htm
    Hope this helps you.
    Regards,
    SBK

  • Warning in DB13 Check DB "BR0970W Database administration alert"

    Hi
    We have an alert message in DB13 when we check the checkdb  log. Log details are as below
    BR0970W Database administration alert - level: WARNING, type: CRITICAL_FILE, object: /oracle/EPR/sapdata10/btabd_11/btabd.data11, value: (max_size) 30466040 KB (> 29439485 KB)
    This warning is for all the datafiles; I did just give the sample log above.
    Can you please suggest and help resolving this issue?
    Thanks in advance.

    Hi,
    The issue here is that there is no enough disk space for the datafiles to extend. In this case you can turn off the auto extend or Increase the disk space of sapdata10 or decrease the max_size or you can move some of the datafiles to other directory or filesystem.
    You can turn off the auto extend while the database is online. After turning off the auto extend, you need to monitor the datafile/tablespace size periodically.
    Regards,
    Varadhu

  • BR0970W Database administration alert

    I get this error in DB13  in CheckDB, .
    BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPCRM.VCSMONITOR
    Please suggest the fix for this.
    Thanks
    Shaji

    Hi Markus,
    Thanks for your reply.
    I checked in SE14, the table VCSMONITOR is Transparent table and the Status is "Not Actve" (Exists in the database).
                           List of all indexes (constraints) of the table                       
                           Index name Unique Short description                                                                               
    0          X      Primary index                                                   
                           There are no secondary indexes                                                                               
    Checked for this table/objec in ECC/SRM/BW systems, in SE14 it reports as "object does not exist".
    Could you guide me further please.
    Regards
    Shaji

  • Database reset alert

    I have been getting an annoying popup from iSync titled "Database Reset Alert", saying that
    "Inconsistencies in your sync information for Contacts and Calendars were detected and have been repaired".
    "The next sync for entourage 2008, address book, entourage, iSync, .Mac and iCal may take longer than usual".
    I have done the following to try and fix the problem:
    1. in iSync preferences I "Reset Sync History..."
    2. I disabled synch in Entourage 2008
    However the popup still comes every 10 or 15 minutes and is extremely distracting. I have looked in this discussion group and saw that some people had the same problem but the problem was resolved when they reset the sync history from the preference menu, but that did not work for me.
    Thanks,
    Ivry

    My MM, iPhone, and iCal info is correct, however, my Address Book and Entourage addresses only lists the persons' name and no other data. Entourage calendar has no data. I'm trying to advanced sync from MM to computer.
    I receive the same message:
    "Inconsistencies in your sync information for Contacts and Calendars were detected and have been repaired.
    The next sync for iSync, iPhone, Address book, iCal, .Mac and Entourage may take longer than usual."
    Very frustrating! I'm afraid that if something messes up MM, I've lost my info. Anyway to backup MM info while waiting for a fix on the inconsistencies issue?
    The first sync with MM worked.
    Thanks,
    Meg

Maybe you are looking for

  • How do I get rid of 'Do you want to allow the following program..."?

    I have recently installed Windows 7 on a new computer and have also installed Dreamweaver MX. Whenever I open Dreamweaver, it comes up with an annoying message "Do you want to allow the following program to make changes to this computer?" My question

  • Ticker or Morquee

    Hi, I am developing a Stocks Application. For my requirements, I have to add a Ticker(Moving Text) in Jlabel. I will get array of values at runtime. I have to show the values in Jlabel. I implemented the code somehow. But I got stuck to get the value

  • Material document not generated

    Hi gurus I created a outbound delivary and PGI is also done. But it didn’t generated any materail document. Can any one help me?? Reward points. kishore

  • Printed document is jumbled up gurbish,

    printed document is jumbled up gurbish, not legible. looks like another language. I.e.. bank statement with lots of numeric. Any time I print my bank statements this happens. HP 4215 Office Jet All-In-One

  • Incorrect countdown timer

    I have a GSM iPhone 5 on iOS 7.  I recently set a timer to an hour and 20 minutes, and started it without having a second thought.  A few minutes later, I went to unlock my phone, and saw some numbers counting down.  I assumed this was an addition in