BR0999E Loading of SQL client library orasql9.dll failed
Hi basis experts,
My SAP system is ECC 5.0 and the RDBMS is Oracle 10.2.0.2.0
I want to use transaction DB13 to make database backups, but it sendme
an error because it can´t connect to the database.
I try to use brtools to make a backup and sendme the error:
BR1001I BRSPACE 6.40 (39)
BR1002I Start of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0999E Loading of SQL client library orasql9.dll failed - please check
Oracle configuration
BR0310E Connect to database instance DES failed
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0280I BRSPACE time stamp: 2007-08-23 09.47.42
BR1007I BRSPACE terminated with errors
BR0292I Execution of BRSPACE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them
or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-08-23 09.47.43
when I try to use any tool of brtools it sendme the same error all the
time.
I read that maybe I had an incorrect version of brtools, but in market
place I only found DBATOOLS Package for Oracle 9.2.x, this version
will work correctly with my Oracle 10.2.0.2.0????
How can I solve this problem??? Please helpme
Thanks in advance
Tania Rosas
ok,
go get BRTOOLS 7.00, you need that version to use brtools on Oracle 10g databases.
go at http://service.sap.com
entry by application group
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Entry by Component
Application Server ABAP
choose proper kernel version (32 or 64-bit unicode or not)
Message was edited by:
Eric Brunelle
Similar Messages
-
Client installation: MsiHandler.dll failed to register. HRESULT -2147024769
Due to a company merger, I had to move approx 200 clients from a SCCM 2012 R2 site to a SCCM 2012 SP1 site. I did this by uninstalling all clients, uninstalling the SCCM 2012 R2 site, cleaned up, set up boundaries and AD publishing on the SCCM 2012 SP1 site,
then changing the SCCM SUP GPO to point to the new SUP.
Almost all clients successfully installed the agent and assigned to the new site , expect for 4.
I have tried:
ccmclean.exe
http://sccmclictr.codeplex.com/ (Reset DCOM permissions, Register common DLL's, Reset WMI Repository, Repair Agent)
None of these helped
ccmsetup.log
<![LOG[MSI: Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.]LOG]!><time="12:34:13.529-60" date="11-26-2013" component="ccmsetup" context=""
type="3" thread="3852" file="msiutil.cpp:300">
<![LOG[MSI: Action 12:34:13: Rollback. Rolling back action:]LOG]!><time="12:34:13.639-60" date="11-26-2013" component="ccmsetup" context="" type="0" thread="3852" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.
]LOG]!><time="12:34:18.014-60" date="11-26-2013" component="ccmsetup" context="" type="3" thread="3852" file="msiutil.cpp:872">
client.msi.log
CustomAction +MsiHandler_dll.EDFC37A5_EC0F_4170_9D99_8A7F441C1017 returned actual error code -2147024769 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (E0:48) [12:34:13:529]: Product: Configuration Manager Client -- Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.
Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.Hi Jason,
Thank you for your reply.
Correction, there are 3 affected systems. One is a Windows Server 2003 SP2 32-bit, the last two are Windows Server 2008 R2 SP1. All three have the same error.
The msihandler.dll is extracted from the client.msi during installation to the C:\windows\ccm folder. When the installation fails, it rolls back and deletes the CCM folder. But I was able to get a copy of the msihandler.dll file, and tried registering it
manually, which failed with a general error that the specified module could not be found. I also copied the file from a working system, but it still failed.
The Windows app event log reflects the same error during MSI installation as the log files.
The systems does have SCEP from the previous SCCM site installed and running. I uninstalled it on of the the VMs and rebootet, but SCCM client installation still fails with the same error. -
Loading sql client oci.dll failed
I am trying to install SAP R/3 Enterprise 4.70 on Windows Server 2000, database Oralce 9.2 and I want to install entire SAP system in 1 Computer.
I have been installed Oracle 9.2 and SAP's center service successfully.
But when i install SAP's database service, when SAPinst run to the Database load (post processing) (R3load jobs: finishing SAPVIEW), it throws error as below and
teminated.
at brconnect.log, the B0999E Loading sql client oci.dll failed -check oracle configuration
i checked connection with D3TRANS -D,
but there was no problem ....
please tell me the answer700 Brtools are only working in a standard environment on Oracle 10. Technical there is a possibility to run 700 Brtools with an Oracle 10 instant client against a Oracle 9.2 database, but this setup is not standard, needs some more manual changes and is therefore not supported.
640 Brtools are designed and compiled for working with Oracle 9.
640 Brtools can be found under http://service.sap.com/swdc
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 04 -> Entry by Component -> Application Server ABAP
SAP KERNEL 640 <your platform / your codepage> -> Windows Server <platform> -> Oracle
current package is: DBATL640O92_45-20000185.SAR
regards
Peter -
Unable to load the necessary SQL connectivity library
I am installing an older (non-Microsoft) program (32bit) that manages mail online and it requires an access to SQL Server to create database to complete installation. I am installing it on Windows Server 2003 standard. This program
I am installing recommends SQL Server 2000. We are now running SQL Server 2005 on a separate server. For connectivity, I installed SQL server 2005 tools (full install) on the same 2003 server as the program so that this program could manage to locate
SQL server 2005 and connect to it in order to create necessary tables and complete the installation. I already manually created the database for this program on SQL Server 2005. I created ODBC SQL Server connection string (User DSN). However, during
installation, I am getting the following error message:
ERROR: Setup is unable to load the necessary SQL connectivity library. This indicates that the proper client-side SQL utilities are not installed on your system. Setup cannot continue.
Could this error be SQL Server version specific and the program only likes SQL 2000 client tools and not 2005? Are there major differences between libraries versions? Should there be something else configured? What am I missing? Thanks in advance.ERROR: Setup is unable to load the necessary SQL connectivity library. This indicates that the proper client-side SQL utilities are not installed on your system. Setup cannot continue.
Could this error be SQL Server version specific and the program only likes SQL 2000
client tools and not 2005?
Tools are tools, not a connectivity library and by the error message the right connectivity library is missing. Ask the software vendor which one is required or look it up on the other machine, where the application works.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
error 126 can not load library "DLBAPRP.DLL" using defaults. this message appears when we try to print from our web bookmarks or any acrobat or pdf files
That error seems to be new with Firefox 4 - never heard of it with earlier versions of Firefox, but it goes back many years in various Windows programs.
See this [http://www.google.com/search?client=ubuntu&channel=fs&q=DLBAPRP.Dll&ie=utf-8&oe=utf-8 search]. -
Failed to load library 'dxva2.dll' appeared at Sky...
Hi, everyone,
I encoutered the issue about failed to load library 'dxva2.dll' again.
My os is Windows XP SP3 Professional.
After I installed Skype 7.5.73.102 and then it started first time automatically.
The error message appeared such as Failed to load library 'dxva2.dll' again.
What's wrong with Skype 7.5.73.10X?
How could I solve the issue which appear again?
Best regards,
Steven.Your Windows XP is more than likely missing mandatory Windows updates that are needed in the latest version of Skype. To resolve the problem, you can get those updates here:
http://community.skype.com/t5/Windows-desktop-client/Fatal-error-fail-to-load-library-dxva2-dll/m-p/... -
Fatal error 'failed to load library dxva.dll
My skype program won't open or load and I get fatal error message ' dxva2.dll what must I do?
A quick search brings up: http://community.skype.com/t5/Windows-desktop-client/load-library-dxva2-dll/m-p/4000948/highlight/true#M348806
-
Failed to load library dxv2.dll
failed to load library dxv2.dll
Your Windows XP is more than likely missing mandatory Windows updates that are needed in the latest version of Skype. To resolve the problem, you can get those updates here:
http://community.skype.com/t5/Windows-desktop-client/Fatal-error-fail-to-load-library-dxva2-dll/m-p/... -
Error while creating database - Cannot load backend library 'oci.dll'
Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks. -
I can no longer print .pdf docs, I get: lxbzgf.DLL was not found & can not load library LXBZPRP.DLL
When trying to print a .pdf doc, it now fails and I get the following dialog box: "lxbzgf.DLL" was not found" and then after closing the session, pops the following dialog box which says: "can not load library "LXBZPRP.DLL"
I think it is related to laptop operating syst. (Windows XP Nedia Center Edition) and latest Adobe Readed XI. Can you help with the proper diagnostic and what should I do, please?
Thanks,
Daer RotcivI really don't know what SP3 is but my Gateway laptop operating system is Windows XP Media Center Versión 2005 with Update Rollup 2.
The only additional information I see on this system is MS WIN MCE GTW US V1.5 07/06. 7515344
Thanks
Enviado desde mi sistema móvil personal de telecomunicaciones -
DAC - Error loading shared library [pmwrtrel.dll] in the dynamic lib mgr
Hi,
While executing ETL load on a Windows 32-bit machine with DAC v10.1.3.4.1, we were able to execute 24 tasks out of 317 successfully. Then it fails with the following error message:
PRE-SESS> TM_6232 Error loading shared library [pmwrtrel.dll] in the dynamic library manager. The error is [Database driver event...Error occurred loading library [pmwrtrel.dll]. System error encountered is 127. Error text is The specified procedure could not be found. .].
PRE-SESS> CMN_1761 Timestamp Event: [Mon Mar 29 19:04:05 2010]
PRE-SESS> WRT_8236 Error getting pre session writer object for target [W_ETL_RUN_S]
MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Mar 29 19:04:05 2010)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21437 Reader: Source is a file-based source.
READER_1_1_1> FR_3118 source [SQ_FILE_DUAL] code page: [7-bit ASCII]
READER_1_1_1> FR_3071 Maximum Line sequential buffer length is 1026.
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Mar 29 19:04:05 2010]
WRITER_1_*_1> TM_6232 Error loading shared library [pmwrtrel.dll] in the dynamic library manager. The error is [Database driver event...Error occurred loading library [pmwrtrel.dll]. System error encountered is 127. Error text is The specified procedure could not be found. .].
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_FILE_DUAL] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_FILE_DUAL] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ETL_RUN_S] has completed. The total run time was insufficient for any meaningful statistics.
MAPPING> CMN_1793 The index cache size that would hold [7340064] rows in the lookup table for [MPLT_GET_ETL_PROC_WID.LKP_ETL_PROC_WID], in memory, is [29555310648557682] bytes
MAPPING> CMN_1792 The data cache size that would hold [7340064] rows in the lookup table for [MPLT_GET_ETL_PROC_WID.LKP_ETL_PROC_WID], in memory, is [12948046503805036] bytes
MANAGER> PETL_24005 Starting post-session tasks. : (Mon Mar 29 19:04:05 2010)
MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Mar 29 19:04:05 2010)
MAPPING> TM_6018 The session completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_FILE_DUAL] (Instance Name: [SQ_FILE_DUAL])
Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_ETL_RUN_S] (Instance Name: [W_ETL_RUN_S])
Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SIL_InsertRowInRunTable] completed at [Mon Mar 29 19:04:06 2010].
Kindly someone tell us how to resolve this issue.
Regards,
Vishnuwhat BIA version are you on?
perhaps you have to install a informatica fix or a DAC patch -
The other day I was prompted to update itunes. I started to, and it crashed my itunes. Then I tried to uninstall itunes, so that I could turn around and re-install it again. Now I can not install itunes. I get Runtime Error! message. R6034. For the last two hours I have tried deleting itunes, moving the .dll files to the desktop, restarting the computer (more times than I can count), deleting the temp files, updating my internet explorer, using the fix it program,.....
The two messages that I am getting are:
Runtime Error! Program:c\Program Files (x86)\itunes\Tunes.exe R6034 An application has made an attempt to load the c runtime library incorrectly. Please contact the application's support team for more information.
Also: Service to 'Apple Mobile Device' (Apple Moblie Device) failed to start. Verify that you have sufficient priviledges to start system services.I too was getting the same message regarding R6034. After many frustrating hours I went to the iTunes support page and clicked on "install and update." When that page came up I scrolled on to "removing and reinstalling iTunes......" There they tell you what files need to be removed and what order to do it in so you can reinstall iTunes. My iTunes works now and I didn't lose any music.
About the Apple Mobile Device, well that's one of the files that has to be uninstalled. When you reinstall iTunes the Apple Mobile Device is automatically reinstalled.
Hope this works for you as it did for me. Warning: it takes about an hour to do all this. -
Fatal Error: Failed to load library 'pdh.dll.'
When I double click on the Skype icon, a dialogue box pops up. It says "Fatal Error" at the top, and inside, it says, "Failed to load library 'pdh.dll.'" I cannot get Skype to open at all.
I had used Skype with no problems the day before, and I didn't do anything to any files or anything. I don't think.
I have restarted my computer, un-installed and reinstalled Skype, and went into %appdata% and renamed the Skype folder, tried to open Skype, then renamed the folder back again. None of this worked.
I ran a Malware scan and it came back clean. I am currently running a virus scan.
Can anyone help me?
Solved!
Go to Solution.See this case:
http://community.skype.com/t5/Windows-archive/Skype-crashes-with-Adobe-Reader-XI/m-p/1557574/highlig...
Have you recently updated your Adobe Reader application? -
Failed to load library itunesmobiledevice.dll - 0x7F
I am getting an error of "Failed to load library itunesmobiledvice.dll - 0x7F (The specified procedure could not be found) using iTunes 10.4.0.80.
I am running windows 7 32bit. Any ideas?
ThanksHi I did a little digging and came up with something that got it fixed. Here goes:
1. Temporarily shut down my anti virus software..
2. Open the control panel and go to the add/delete programs going to the uninstall section.
3. Remove all Apple products in the following order:
ITunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support.
You do not need to remove safari.
4. Restart the computer.
5. Go to Apple.com and download latest version of oTunes.
6. Re-install.
This worked for me. No more error mags and all is working again. -
Jquery ui css is not loading in my page, i done this using client library....i tried to check using
jquery ui css is not loading in my page, i done this using client library....i tried to check using firefox.. firebug addon..the css is showing as empty...so finall css is not calling can you please suggest the solution for this...
Thanks for ur response...I followed the same link what you suggested for me...
actually i try to display the buttons in jquery ui buttons format but it is showing as normal buttons..so i checked uisng firebug ..here css showing as empty.....
please suggest the same..
In css.txt.. i write css file names like the below..please confirm is it correct or not
jquery-ui.min.css
jquery-ui.css
Thanks in advance...
Maybe you are looking for
-
So my mum has an ipad and iphone and she wants to connect it to a laptop so she can add Cd's to her itunes and then to her ipad and phone But she doesnt want my itunes as she has bought stuff on her account So if I lgged out of m itunes on my compute
-
How to send a photo via bluetooth from iphone 5s to laptop
how to send a photo via bluetooth from iphone 5s to laptop
-
DDP 2.0 and DDP 2.1... what difference?
I use DLT to create master. I usually use 2.0 but not understand why I need to use 2.0 instead of 2.1. Can you explain what difference? I wonder if I can use DVD-R with ddp as master. Is that good idea instead of using DLT due to high costly on DLT?
-
Can't see any photos added through iTunes
just bought the iPhoto app recently. I was trying to add photos to iPhoto through Itunes, it synced but not showing any photos in the iPhoto app... wondering anyone having the problem as me???
-
How do I get the airport extreme to broadcast to a U.S Robotics model 5430 wireless g bridge? I want to hook up the bridge to my directv box for on demand. THANKS!!!