BR1310 with 12.3(4)JA write erase

After a write erase and a reload my Bridge boots up as an AP with the DOT110 radio shutdown and no ssid?
is this normal?
regards Bernhard

Yes thats right. i saw it in the release notes. but when i upgrade the bridge and set it back to default the antenna alignement doesnt work anymore bc there is no ssid and the interface is shut. so thats not really a good "security feature".
can somebody from cisco answer that?

Similar Messages

I do 'write erase' on AP, but configuration remains

On my Cisco Access Point Aironet 1200, I do 'write erase', 'reload'. I noticed that some configuration remains(such as BVI IP address).
What am I missing ? Why this configuration remains in spite of 'write erase' and how can I make sure that the whole configuraiton is wiped out from AP 1200 ?
p#wri erase
Erasing the nvram filesystem will remove all configuration files! Continue? [con
firm]
[OK]
Erase of nvram: complete

Hi, I don't see any setting on DHCP. I pasted the running config configuration below, however, it makes no difference after what happened.
I think I messed up.
I did 'delete flash:env_vars', reload.
Then upon power cycling the device it appears now only with a prompt "ap:". I will need to read more to understand this, but it seems I delete the entire image, right ?
I guess I would need to load image thru tftp at this point, correct ?
Building configuration...
Current configuration : 1534 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret xxx.
username Cisco password xxx
ip subnet-zero
no aaa new-model
bridge irb
interface Dot11Radio0
--More-- no ip address
no ip route-cache
ssid myyoursours
authentication open
guest-mode
short-slot-time
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
--More-- bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.43.545.20 255.255.252.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging snmp-trap emergencies
logging snmp-trap alerts
logging snmp-trap critical
logging snmp-trap errors
logging snmp-trap warnings
bridge 1 route ip
line con 0
transport preferred all

How to recover after "write erase"

I have a 9505, After running the write erase command, I can no longer log into the switch via telnet with the default admin password or the last configured password. Also I no longer get any activity over the serial connection to log in through serial. How can I reset this director back to factory defaults?

Yes I did reset the switch after the write erase. I do not think it reverted back to factory defaults though. I still get a login response when I telnet to the configured IP address, but no passwords seem to work. I have tried admin/admin as per the documentation defaults and the configured password, both reply with login incorrect. I have also tried no password.
I am using the supplied Cisco serial cable which I know works because I was connected serially when I sent the write erase command.
Since the command and system reset I have not seen any activity through the serial connection. I have tried both the top and bottom supervisor and neither show any activity when the switch boots up. I am using a windows laptop using hyperterm with 8/1/N settings as per the documentation.
Is there any other way to set factory defaults? I am out of ideas on how to recover this switch.

How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?

How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?
I do not use command line and tried to use ZapResourceForksAMAub_1.2 which I downloadedand instaled the Zap Resource Forks.action. Next I tried to use their sample copy-zap-rsrc.workflow in Snow Leopardon my Mac Pro. The 3 different steps are displayed in Automator but there is no place to put in which folder (on my deskto) to copy, and remove the resource forks from the graphic files.
Can sombody please step me through this please please.
W.W.

Unfortunately, Back to My Mac only works across computers using the same iCloud account.

HT201274 I was given an iphone 4s by my sister as she got a new one, now i want to clear it so that i can set it up with my own details, if i erase all content and settings will this affect anything on her new iphone as it is synced to the same gmail acco

I was given an iphone 4s by my sister as she got a new one, now i want to clear it so that i can set it up with my own details, if i erase all content and settings will this affect anything on her new iphone as it is synced to the same gmail account

her contacts are connected directly with the Google Server so as long as they are saved to her Gmail account she should be 100% fine.. the only contacts she may lose are the ones that she added directly onto the phone and did not sync to her Gmail account.. so you should just double check with her on that

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Syncing to a "New" Computer or replacing a "crashed" Hard Drive

The iPod is synced with another iTunes Library, how do I sync it with my new MacBook Pro without erasing contents of iPod?

The iPod is synced with another iTunes Library, how do I sync it with my new MacBook Pro without erasing contents of iPod?

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

HT1430 I was given an ipad 2. How do I reconfigure it with my own settings, etc. and erase the previous owners informations?

I was given an ipad 2. How do I reconfigure it with my own settings, etc. and erase the previous owners informations?

But note, if the previous owner turned on Find My in iCloud and has not turned that off you will not be able to do anything with that iPad without the previous owner's Apple ID...there is an Activation Lock as part of iOS 7.0.4 that cannot be bypassed so you have to have that Apple ID and password if it has been turned on.

Write Erase - will I lose license info?

Hi,
I have a requirement to move 2 x MDS9513 switches from one site to another and add them into an existing fabric.
The configuration will need to be erased once moved in order to re-configure IP addresses, switch name etc.
The plan is to perform a "write erase"
My question is : Will a "write erase" delete any license information held on the switch?
Regards
Rich

Hello,
Please be sure to have backup Licenses before doing a "write erase" on the MDS switch.
Pease see here from Obtaining and Installing Licenses:
http://www.cisco.com/en/US/customer/products/ps5989/products_configuration_guide_chapter09186a0080664c67.html
Tip We recommend backing up your license files immediately after installing them and just before issuing a write erase command.
I hope this helps.
Regards,
Carlos

HT1296 If I want to sync my iPhone to my new MacBookPro that was previously synced with a different computer, will it erase everything from my iPhone?

If I want to sync my iPhone to my new MacBookPro that was previously synced with a different computer, will it erase everything from my iPhone?

Yes, unless you first transfer a copy of your iTunes folder from the old computer to the new one.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

I have a mac book air, and i bought a LG portable cd drive, which is suppose to burn cds. but they software cd that was included with the lg cd/dvd writer doesnt load. and i want to burn a cd from itunes but it says " burning software is not found"??

so i bought a mac book air, and i had to buy the LG portable cd drive... which is supposed to burn cds? the lg cd/dvd writer came with a cd but it wont load onto my computer when i plug the usb cord in. all i want to do is burn a cd from itunes but it says " burning software not found" but the LG cd drive says it will burn cds?? im confused please help!

You dont need ANY CD/DVD burning software on your Mac
Just plug in your LG DVD/CD player and follow the below instructions
http://support.apple.com/kb/HT1152

How can I get my iPhone to sync with a new computer without being erased?

I was syncing my iPhone with my MacBook Pro, but I formatted the operating system and installed a new iTunes on my laptop. When I connect my iPhone to the laptop, iTunes wants to erase everything in order to start syncing. I want to start syncing with my laptop, not remove all the content already on my phone. I don't want to loose my apps, my contacts, bascially everything on my iPhone.
What can I do? I appreciate for your help
Best!

See the excelent user tip by wjosten: https://discussions.apple.com/docs/DOC-3141
In short, you can't. But, you can do it in a way that minimizes what information will be lost, if any.

Confused about synching multiple phones to the same computer with different content: itunes wants to erase everything??

I have had an i5 for some time, but my partner just bought one to replace her 3GS. We both synch to my itunes, and have been doing so for as long as I can recall. When we got her i5, we backed up her 3GS and reloaded the content into her i5. So far so good. Now, this couple of weeks later, I decided I wanted to put some of the movies, music, etc. that I have on my itunes library on her phone. I had previous installed some of the apps that I have there without trouble. However, when I tell my itunes to put movies (etc) onto her phone, it warns me (upon apply) that this phone has been sync'ed to another itunes, and that I can do what I am asking, but it will erase everything on the phone now! I cancelled this op at this point.
As far as I know neither of us has sync'ed her phone to any other itunes, although she has probably downloaded stuff directly into the phone using the onboard itunes. Is that what it's warning me about? Is there any way to either pull the content off the phone, or merge the content with what she had locally downloaded? If not, I'm willing to sacrifice the few things that she had locally loaded as long as it's not going to, for example, erase all her photos, and contacts, and everything else as well at the same time!
This is all rather confusing to me. It's actually rather confusing that one can synch multiple devices with different settings at all, and I'm extremely surprised that it works at all. Can someone clarify what's going on here? What I should/shouldn't do? What I can/can't do?
Thanks in advance!

First make sure you have authorised the iTunes computer you are using for all of the associated apple ID's via the Store Menu>Authorise this computer and enter the apple ID and password used on the phone (repeat for as many apple ID's are in use on the phone).
Then right-click (or Control Click) on the name of the phone and select Transfer Purchases (this can also be found under File>Device>Transfer purchases). This will back up all of the purchases on the device to your computer, then when you sync with the phone it will put them back on even though it has just removed them.
Its a round about way of doing it but she shouldn't loose anything as long as the computer is authorised for all of the apple ID's used on the phone

How do i get my new purchases to sync with my nano without having to erase everything??

I'm trying to sync my purchased songs to my nano, but it won't give the option or I can't find the option to do so without deleting everything. This is 1 of 3 computers that I have authorized for this, so I have downloaded CD's from one computer and purchased songs from 2 other computers and had no problems syncing, now I can't figure it out. I know this is probably pretty simple but this is my first Apple device.
Thanks!

Your iPod is designed to sync with only one computer/iTunes library at a time. That is, unless you manually manage the iPod's contents. See this article for more details.
Using iPhone, iPad, or iPod with multiple computers
Otherwise, if you want to continue autosyncing your iPod with iTunes, you'll want to copy everything currently on the iPod to your new iTunes library and then choose the Erase and Sync option or hit the Restore button from under the iPod's Summary tab to allow your Nano to start syncing content from the new library.
B-rock

How do I restore my iMac with no backup after it was erased through iCloud find my iMac

I removed my iMac from my device settings on my iCloud on accident. I had bought a new one for my office and moved this one to my home for my wife.
Well, I set it up for her, did the migration from her old computer to her new computer. Worked like a charm, we sold her old computer.
It's been about 6 months now. Our home computer has all of our pictures.... Time machine was not set up.
A Few days ago I was using her computer and needed a password from my notes. I went to the notes on the computer and noticed that they were not syncing because we hadn't logged this home computer into my iCloud
As soon as I logged in my icloud the screen went to a password request mode .. So I put in my password and the screen froze, then rebooted to install OS X, time machine, disk utility....
Then I got an email saying that my iMac was found and all data was erased....
Apparently, I removed the wrong computer from my devices on iCloud. Thinking I was removing her old computer we sold, I removed this one..
Is everything lost?
All I care about is my pictures and I don't know what to do...
The back up I found I tried to restore but it got complicated when it told me I had to do a list of different steps bc the backup ..
I don't want to do anything and possibly ruin a hidden back up somewhere.
Called apple they said they didn't know why it what happened and said I had to reinstall.
I tried reinstalling twice and it won't even reinstall now..
I come home late from work and had no desire to get on the phone for hours so I came here..
Help
I don't even know why it was erased

Regardless of why it happened, the fact is that you have tried repeatedly to write data to the drive. This will result in overwriting whatever data were on the drive making any sort of recovery impossible. But you can give it a try:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
Beyond this would be erasing the startup volume and reinstalling OS X:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

BR1310 with 12.3(4)JA write erase

Similar Messages

Maybe you are looking for