BRAIN009 in RSA1 in client 001

Hello.
Yesterday I installed NW04s and copied client 001 to client 100 using profile SAP_CUST. After logging in to client 100, RSA1 aborts with error BRAIN009 "You can only work in clinet 001". I already implemented SAP Note #758956, but this did solve the issue.
What do I have to do to run RSA1 in client 100?
MIKE

I switched the contents of field BWMANDT in table RSADMIN from '001' to '100'. Now RSA1 works in client 100.

Similar Messages

RSA1 Transaction possible only with Client 001

Hello BW Gurus,
Regards.Well We have just Installed BI 7.0 and when we tried to execute RSA1,we get a messg stating : Can execute only with CIENT 001.
2). Am unable to see any Business Content Objects when i clicked the BC Tab..Can only view them Technical content objjects.!!!!
It will be great if u guys can help me out on this..Will assign points for sure..
Many thanks
arun.o

Dear Gurus,
Here we have installed Netweaver with BI + EP and created a dev client 500 through local client copy from client 001. Now when i try to execute RSA1 in client 500, it is asking to do it in Client 001. For this I have changed the parameter login client =500 through rz10 and restarted the server. Still it is asking to login in 001 client.
Regarding BI Content I am uploading the pakage through SAINT .
Can you guys suggest me the solution for this above issue and work on client 500.

RSA1: You Can Only Work in Client 001 issue

Dear All,
I am having SAP NW 7.4 SR1 as abap system ,I have created one new client ,while runnning RSA1 t code i ma getting below message
RSA1: You Can Only Work in Client 001...
I have cheked below
1. Go to Transaction SE16, and enter table RSADMINA
2. Change the BWMANDT field entry to the client number you wish to use
above is the solution for this issue ,but i ma unbale to chnage the client in se16
here chnage option is gayed out.
Please suggets is there any alternative for this
Thanks

Hi Basis,
Please follow below steps to edit.
SE16n---> Enter table RSADMINA ---> Provide /h on command field --> press F8 key --> On the screen provide two inputs GD-EDIT & GD-SAPEDIT with value X for both & click on change icon.
After that press F8 key again,now you'll be able to change the things.Please follow same for other table,if you want these tables under change mode.
Regards,
Gaurav

SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

Hi BI Experts,
I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
I appreciate all your input.
Regards,
OSR.

Hi,
Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
If you want it in different client, you change it in BWMANDT field of RSADMINA table.
hope it helps.
Regards,
Pruthvi R

Steps to create a logical system for client 001.

Hi,
In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
Here, can you give me steps to create a logical system with client 001 using tcode scc4.
Thanks,
Kannan

hi
     First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
     Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
     You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
     Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
     Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
     R/3 - B W - R/3
     Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
     PC Flat file , DB  Database
     Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
     BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
     R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
regards
ashwin

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

System NSP client 001 has no logical name!

HI all.Im install SapNetWeaverSneakPreviewABAP.
-client copy (txn SCC4) into say 001
-log on to 001 with **** and pass
transaction SCCL source client 000 and target client 001.
-now run transaction RSA1 for initial bw setup
AND SAP output System NSP client 001 has no logical name!
And two button - create and assign...
Please howto info

hi,
have you assigned client 001 to logical system ?
spro->bus inf warehouse->link to other systems->general connection settings->assign client to logical system.
take a look
http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps.

Client 001 issue.

Dear BW Gurus,
We got into a critical situation here by doing development work in Client001!!.The Basis guys installed the BW and created client 500 along with client001.But they gave the logical system name as BIWCLNT001.Then when we tried to execute RSA1 in Client500,the system gave a messg" Can work only in Client 001".So we mailed SAP reg this and they replied that "In our scenario it;s not possible to work on Client500 and rather only in Client001".Although we knew its not advisable to develop in 001,we had no other way than to do it.Now when i added a CL Info object as Navigation attribute to 0material and then deleted the attribute and tried Activating 0material,which lead us Breaking the SAP D Version of the info object!!!!!!Now we are totally lost and if would be great if someone can take time to advise us of what step to take ,next!!!
1).Can we do a fresh installation again or
2). Transport the 0material Info object from PROD to DEV ??
manythanks
arun

Hi Raju,
Thanks for that..But After i transport from PROD to DEV,what abt working on Client001 issue again??What changes needed to be done for working fine with Client500??
cheers
arun

Error--" you should login to Client 001"

i have installed NW2004. it has BW3.5 in it
i have created a client called 100 and done client copy aslo
when i login to client 100 and execute transaction RSA1 it is giving me a message
" you should login to Client 001"
I dont have client called 001 and i have to work in BW only in Clinet 100
Pls let me knwo what i can do in this regard

Hello Balaji,
Please follow these steps :
In Transaction SE16goto Table RSADMINA.Check if there is an entry '001' under the field BWMANDT. In case you find it please delete that table entry completely.
Change the system default client to the correct value .Profile parameter is login/system_client.
Also you may reset the buffer using transaction /$sync though it is not a must.
First delete the entry in the table and reset the profile parameter and then check.
Please award points if issue got solved.
Regards.
Ruchit.

Fresh BW Installation : You Can Only Work in Client 001

Hello All,
I am doing a BI 7.4 installation.
Till now i have just installed NW7.4 ABAP system. I did some of post processing steps after installation like STMS, SGEN.. etc.
We want to have client 100 for BI usage. So i created 100 client with client copy with SAP_CUST profile.. is this corrrect ?
Now i have 2 question..
1. When i run RSA1 in 100 client, I get error "You Can Only Work in Client 001" ? Did i performed wrong client copy ? What is correct procedure. I do not find anything in Installation guide for NW.
2. I need to deploy BI_CONT addon. I can do this with SAINT.. is there some post activity.. which activate something ?
best regards
ashish

Hi
1. When i run RSA1 in 100 client, I get error "You Can Only Work in Client 001" ? Did i performed wrong client copy ? What is correct procedure. I do not find anything in Installation guide for NW.
Kindly refer the SAP Note 316923 - Termination of program RS_CLIENT_COPY_BW
2. I need to deploy BI_CONT addon. I can do this with SAINT.. is there some post activity.. which activate something ?
Kindly refer the SAP Note 153967 - BI Content Release Strategy
1808103 - BI_CONT 737/747 SP04 and higher: Information on Add-On SPs
1808103 - BI_CONT 737/747 SP04 and higher: Information on Add-On SPs
BR
SS

You Can Only work in Client 001

Hi Gurus,
I Installed ABAP Netweaver successfully, and i tried to connect to BW workbench using Transaction RSA1, i get an error message which states that "You can only work in client 001", Please how do i solve this problem. i need a detail step by step in solving this problem because i am a beginner.
Regards
Gabriel
[email protected]

hi
You can also try this
You need to make client XXX as your default login client. For this change the value of profile paramter login/system_client accordingly in RZ10. Further execute the function module RS_MANDT_UNIQUE_SET in SE37 with value of i_mandt being set to client XXX (in general the client where you want to execute this transaction).
regards
Jameel

Your SAP BW system can only operate in client 001

Hello,
After installation of SCM 5.0, we did client copy from 001 -
>800.
But when we execute RSA1 we got the error message:
"Your SAP BW system can only operate in client 001"
Is this because of client limitations?
If yes, how it can be solved.
Incoming days we are going to upgrade to SCM 5.0 from SCM 4.1.
Will it cause a problem?
Thanks in advance.
Regards,
Tushar

Dear Naveen,
It worked.Thanks a lot. But still have a logical system issue.
RSA1>message appears->
"Logical system name has been changed for the
system"
When I gave logical system of client 001 to 800 then it worked.(with RSADMINA has entry now 800 which was changed from 001).
It still not working logical system of client 800.
I afraid, we will face issue after upgrade to SCM 5.0.
I hope client will not modify after upgrade to SCM 5.0 in RSADMINA.
Regards,
Tushar Chavan

No service for system SAP***, client 001 in Integration Directory

Hi,
We are doing a File to IDOC scenario.
The file is picked up and the idoc is getting generated in XI but this idoc is failing at XI outbound with the following SM58 error:
No service for system SAPABC, client 001 in Integration Directory
where ABC is my XI system ID.
I have searched in sdn and tried all the possible solutions given in the previous blogs with same subject but not able to resolve this error.
Any help will be greatly appreciated.
thanks in advance
Jagruthi

Hi Rao,
please check given link may be useful for you
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
No service for system ... in Integration Directory
Regards,
amit

How to Configure client 001 to logical system in trial netweaver abap?

Hi,
I have downloaded and installed sap netweaver abap trial version in my pc. I want to configure client 001 and assign it to a new logical system in it. I do not know how to do it as it is a prerequisite for BI. Kindly provide me steps to configure it.
Thanks in advance,
Regards,
Kannan

Hi
You need to follow some steps in both the systems
R3 side
http://help.sap.com/saphelp_nw2004s/helpdata/en/27/8d8342a7d30d53e10000000a155106/content.htm
BW side
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Hope it helps
Thanks,
Teja

PI-7.0(xi-7.0) as production server - wrongly abap client(001)

Hi all,
We are using PI-7.0(xi-7.0) as production server, we ran the post installtion successfuly last 6month before and now server status is live production system.
Our issue is we ran wrongly abap client(001)as default client in the post-installation step. Now only we identified this. So we need to change from client(001) to production client(576).
Please guide us to how to change the client..what are the solution to change .
Thanks in advance.
Regards
Lakshminarayanan M

Hi,
>Any updates ?
Do you realise that I'm not paid by my employer to do your work ?
Is it so dificult to search for SAP OSS note with "client" as keyword in BC-XI area ?
I took me 2 minutes to find notes 1115280 and 940309
It is possible to use an other client instead of the default 001 client but there is no advantage and you have to reconfigure a lot of thing which can lead to a lot of trouble.
PS :
[Mode rant on]
Why are so many people on these forums asking to be spoon fed ?
They need to learn how to search information. It's so easy with the internet age and search engines !
[Mode rant off]
Regards,
Olivier

BRAIN009 in RSA1 in client 001

Similar Messages

Maybe you are looking for