Brain299  System error in program CL_RSR_HIERARCHY_BINCL

In a BEx Analyzer query, when trying to use 'select filter values' on the ORGUNIT hierarchy, the query crashes with error message:  System Error in program CL_RSR_HIERARCHY_BINCL and form HIERACHY_INTERSECT.  We are running BW 3.5 SP12.  Have applied several OSS Notes (SP16) but still have the problem. This seems to only occur if a variable for 'key date' has been used.  If I run another query using the ORGUNIT hierarchy without a 'key date' entry, the select filter values' work.  Any suggestions?  Any help is greatly appreciated.

Hi,
try: Activate the affected hierarchy once again.
You can use the RRINCLTAB_REBUILD program to repair all the hierarchies or all the hierarchies of a characteristic at once. If there  are many hierarchies in the system, you should run the program in the background
/manfred

Similar Messages

  • BRAIN299 System error in program CL_RSR and form _CHACONST_SID-02

    I am getting the following error when trying to update and activate my multi providers.
    BRAIN299 System error in program CL_RSR and form CHACONSTSID-02
    Info cubes syntax check is fine.

    Hi,
    try to implement this SAP note:
    InfoObjects: Unintentional characteristic constant
    SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d] 
    Symptom
    In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
    Other terms
    InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
    Regards
    Andreas

  • !!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

    Hi Gurus,
    Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
    In the log i am getting following error message:
    "System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Message no. BRAIN299".
    Please help urgent.
    FYI.....
    we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
    Points will surely be awarded.
    Thanks,
    Anurag

    Hello Anurag,
    Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
    Regards,
    Neha

  • System error in program CL_RSMD_RS_SPECIAL

    I have a query built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes. We are on SP13. So do anyone know how to fix this issue, or a single OSS that can fix this issue.
    System error in program CL_RSMD_RS_SPECIAL and form
    IF_RSMD_RS~READ_META_DATA-02 (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program
    state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template,
    or during interaction in the planning modeler, and if you can reproduce
    this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for
    the trace tool environment as well as SAP Note 899572.
    and in portal, it gets to the point of variable screen and then throws a error msg.
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    MSGV1: SAPMSSY1
    MSGV3: UNCAUGHT_EXCEPTION

    I was a lil late on this time
    However;i found a note below which exactly matches your infoset issue and 0fiscper,but i believe that SP-14 did the trick.
    any ways good luck
    Note 1058906 - GET_DIME_VALUES-02 in CL_RSMD_RS_SPECIAL
    Hope it Helps
    Chetan
    @CP..

  • System error in program SAPLRSDRC

    Hi Gurus,
    I created a control query for precalcualting web templates using reporting agent and when i released the job it gave me this error
    <b>System error in program SAPLRSDRC and form /BIC/F100012</b>
    Message no. BRAIN299
    <b>
    Diagnosis</b>
    This internal error is a targeted termination since the program has an
    incorrect status.
    <b>
    Procedure</b>
    Analyse the situation and inform SAP.
    Does any body has any idea about this error. Please let me know any one got across this kind of problem.
    Thank you one and all
    Suneel

    There may be some error (eg syntax error) in this form routine.
    Open program saplrsdrc and search for the form routine  /BIC/F100012, or do a syntax check on SAPLRSDRC. If syntax check is ok, do see if you have this form routine, and whether it has any code that is resulting in a runtime error.
    You may also check for dumps in ST22.

  • System error in program CL_RSD_MULTIPROV_CHECK========CP

    Hi all,
    I work with BI 7 release, SAPKW70019 patch. I see the following message when I activate a multiprovider:
    System error in program CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I cannot find a reason why this message arises. The only thing I notice is that one of the two infocubes that compose the multiprovider contains 20 key figures and one of them have the aggregation on '0CALDAY' reference characteristic (and 0CALDAY is not available). Both infocubes are activated without problem.
    Any ideas?
    Thanks a lot for the support!
    Gianluca

    Hi,
    Termination CHECK-03- issued instead of a warning
    Try this SAP Note Number: 1252207

  • System error in program CL_RSR and form GET_CHANMID-02-

    System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I got this error in SCM IDES 7.0,  Planning Area Initialization and Display MPOS...Please help me...

    Hi,
    One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
    System error in program CL_RSR and form GET_CHANM-01
    Please advice as this is very critical.
    Thanks,
    Tintu

  • "abort system error in program CL RSR and form GET_PROVID-02-(see long text

    Hi All,
    When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
    "abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
    System error in program CL_RSR and form GET_PROVID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    Can anyone help me?
    kumar.

    Hi , could you please check note 1166294 and check if the issue will be fixed ?
    1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
    Thanks,
    Walter Oliveira.

  • BW Jump query - System error in program CL_RSR_REQUEST-VQUERY_FOCUS_IOBJNM

    I am trying to perform a jump query from two cubes and when I use the Go to function I received the following message:
    System error in program CL_RSR_REQUEST and form
    EXECUTE_VQUERY:VQUERY_FOCUS_IOBJNM_MISSING
        Message no. BRAIN299
    My replacement path variable is perform into a dimension called 0BATCH  (Lenght 10)  and the SENDER dimension is called ZC_SERIAL (lenght 12).
    Is it due to the lenght difference of the field?
    Regards,

    Hi,
    It seems, that you use in one of your variables values from the other one which is missing in your query, and system cannot find the source because of the CHAR length MISS MATCH.
    Hope this helps.
    Regards

  • Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

    HI All,
    The following error is thrown when I execute the query.
    abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
    However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
    Appreciate your help in advance.
    Regards,
    Harika

    Dear Harika,
    Try to repair at RSRV and check.
    Check: Re: SID error for characteristic
    Srini

  • BW-WebI Report: MDDataSetBW.GetCellData.  System error in program

    Hi,
    I'm trying to run a WebIntelligence Report connected with BW Query but return error before showing the results.
    The error is:
    Error in MDDataSetBW.GetCellData.  System error in program CL_RSDRC_MULTIPROV and form SETRESOLVE-01- (consid.TxtDescrit.). (WIS 10901)
    My query in BO contain 8 dimensions and 2 measures.
    Someone has been there?
    Tks!
    Edited by: Peeter Cassiano Antunes Bonomo on Sep 6, 2011 7:33 PM

    Ingo,
    running the query in RSRT with the same elements works perfectly.The results are displayed.
    But tested the MDX query in the transaction MDXTest and entered in the ABAP Debugger, press F8 and the following message appeared:
    "The current application triggered a termination with a short dump".
    "The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type x)."
    "Short text of error message:
    System error in program SAPLRRK0 and form CHECK_KHANDLE (consid.TxtDescrit)."
    Does that help?
    Tks,
    Edited by: Peeter Cassiano Antunes Bonomo on Sep 9, 2011 3:18 PM

  • Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

    Hello SDN
    While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
    "Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
    Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
    Appreciate any help and points will be assigned for useful information.
    Thanks
    kumar

    Hi Dinesh
    It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
    variable_screen=X&template_id=0QUERY_TEMPLATE
    In the messages , For generation, it display:
    &CAUSE&
    The query contains selection elements with "Constant Selection". Such a
    query cannot be run in the read mode 'Read Everything at Once'.
    &SYSTEM_RESPONSE&
    The read mode is automatically converted.
    &SYS_ADMIN&
    In the Variables, I see
    &CAUSE&
    Variable <(>&<)>V1& is used in the query in such a way, that an
    optional entry is not possible.
    For example, you might be using an "Exclude", or the variable might be
    connected using OR to additional selections for <(>&<)>V2& in the
    global filter, but is still displayed in the columns selections.
    It is also not possible to use an optional parameter variable to fill
    an interval selection in either the from-field or the to-field.
    &SYSTEM_RESPONSE&
    &WHAT_TO_DO&
    If you are able to accept the mandatory entry, you need not do
    anything. Otherwise you must work with several variables in the query.
    You can use an optional interval variable to do this.
    &SYS_ADMIN&
    For Key Figs :
    &CAUSE&
    Quantities are multiplied with values for the key figure &V2& (&V1&).
    This is not sensible.
    A basic key figure was probably defined that contain a price. Only
    addable amounts should be written on the database. Ratios and prices
    are calculated as key figures. Therefore, the system maintains the
    correct sequence, meaning summing takes place on every place and then
    the quotient is formed.
    If a 'price amount' is saved as a basic key figure after all then the
    'non-aggregated indicator' can be undone using 'Change key figure'.
    Therefore, the system carries out the multiplication (or division)
    before the summing. The key figure is then assigned to the group 'Other
    columns'.
    &WHAT_TO_DO&
    Please check the definition of the key figure &V2& (&V1&).
    <DS:TRAN.KDNN>Check or change key figure &V1&</>
    Can you please let me know how to fix this issue?
    Thanks
    Kuamr

  • Error Specify a value for variable-Abort System error in program SAPLRRK0 a

    Dear Experts,
    Could anyone help me to fix this issue?
    I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
    The error message is
    Error Specify a value for variable ZR00**
    Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
    Many thanks in advance.
    Regards.
    Krishna.

    Hi Kishor,
    try runnig the same query in RSRT, with execute and debug option.
    Also check in query designer for its correctness.
    Hope this helps...
    Regards,
    umesh

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All,
    When I refresh a query/workbook getting following error message and can not proceed further..
    Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this

    I don't know if you have since been able to resolve this problem.
    Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
    Hope that this is of help to someone.

  • Adobe Photoshop CS6: Photoshop.exe - System Error  The program can't start because ONCoreFoundation7

    I get this error after updating ONONE premium edition 8 to 8.1
    been to their site no luck in resoving error.
    I click ok to error PS cs6 still launches, just annoying.
    ONCoreFoundation7.dll  is part of ONONE 7

    after updating ONONE premium edition 8 to 8.1
    does not say windows 8 or 8.1
    again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
    does not say 7
    here's your more info
    I'm trying to fix an error message not covered in the knowledge base.
    I open PS CS6 (after updating to PE 8.1) and I get an error message...
    Adobe Photoshop CS6: Photoshop.exe - System Error
    The program can't start because ONCoreFoundation7.dll is missing
    from your computer. Try reinstalling the program to fix this problem
    I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
    Does anyone know the fix? I even tried reinstalling PE 8.1.
    PE=Premium Edition

Maybe you are looking for