Brand new 27" iMac won't turn on anymore.

I bought this computer new on Friday last week. I only got it back from a data transfer yesterday.
Everything was fine until my screen grayed out and said I have to shut down the computer. I shut it down and now it won'tturn back on. I can here the hard drive and fan spin but there is nothing happening on the monitor.
Any ideas?

If the plug is flush inside the back of the machine, and the power outlet you have it connected to works for a lamp, you have a lemon.  Bring it back for an exchange.

Similar Messages

  • My brand new MacBook Air won't turn on all the way.

    Hi my brand new MacBook Air won't turn on all the way. If I try to restart it or shut it down, it will go like it is starting up, but goes to a gray screen and stays there. I can see the mouse and move it, but it won't turn all the way on. What is wrong with it? It had been working fine since I got it, but today it hasn't been.

    You may have to see if troubleshooting this issue can help, though the instructions on a process of elimination by symptoms are tedious in the following support article, and are suggested to be performed ahead of trying the process described in the title.
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    For the actual SMC reset, note subsection in above, instructions click-open on blue text:
    >Resetting the SMC on portables with a battery you should not remove on your own
    If the computer does not shut down, and just hangs there, try pressing the power button down for 15 seconds. Check the suggestions in the above article to see if any of them can be used, if the computer will power-up.
    There is another item that sometimes can help, but the main issue you say could be resolved by the SMC reset; this other thing is involved NVRAM (non-volatile random access memory) so here's an article about it.
    •About NVRAM and PRAM:
    http://support.apple.com/kb/HT1379
    >Resetting NVRAM/PRAM opens in above, click-to-see instructions on how to reset.
    You may have to call ahead to the nearest Apple Store for an appointment to see a Genius; or at authorized reseller, their service product specialist who should be trained to understand how to proceed, just in case there is a hardware issue behind the symptoms. When you call, be sure to have the serial number and purchase date available, when you call an official store.
    Or use the 'Apple - Support - Contact Apple Support' to start the process...
    http://www.apple.com/support/contact/
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • Brand new 20" iMac won't recognize Ethernet cable - can't get online

    I just got my iMac and cannot get the ethernet cable to recgonize. I know it works b/c I'm using it this very moment to type this on my Powerbook. When I plug it into the PB, I get the yellow,then the green once it connects. However, when I plug it into the iMac, I get nothing. I thought maybe I needed to configure Built-In Ethernet, but it won't let me select configure or connect. The assistant won't recognize it either. I posted in the Tiger forum mistakenly, but thought this forum would be more appropriate. This is what I posted (for more detail):
    I just unboxed my new iMac and can't get on the internet (I'm on my powerbook). The problem is this; in Network, it says "The cable for Built-In Ethernet is not plugged in." Only, it is. Can't be the cable b/c that's the cable I'm connected with right now. So, I go through "assist me" and when I click on "Assistant" it takes me to the Intro page where I'm supposed to give a Location Name. I do this, calling it "home." The ver next screen, after clicking "continue" takes me to "How do you connect to the internet?" The problem here is that, of the 5 options, only one is selectable. Airport is the only one that can be selected?? "I use a telephone modem to dial my ISP" as well as "DSL Modem/Cable/Lan" are all greyed out..they cannot be selected. I use an ethernet cable. Why is this not able to be selected? It's very frustrating. I've turned off Airport and Bluetooth, yet I still cannot check any of these. I need to check "I use a cable modem to dial my ISP" but I can't b/c it won't allow me. Can anyone help me here? I can't use my brand new iMac and it's kind of a bummer. I thought these things were plug and play? Thank

    Well I tried that and nothing. I'm completely stumped. I have no idea why this is happening. And it's weird b/c, everytime I'm jumping back on here, I'm just unhooking the ethernet cable from the iMac and plugging it into my PB. And, nearly immediately, i'm up and running, connected with the PB. How can it work on the PB and not on the iMac? And why would those options be grayed out on the iMac? It's like it just refuses to let me check them and/or configure. That is very weird.

  • My brand new MacBook Pro won't turn on. What's the deal with this?

    I got the thing yesterday. Sat down with it last night and everything started up fine. I set up my account and then it was time for updates. Naturally, I said yes to the updates. They downloaded, they installed, and that was the last time my brand new MacBook Pro turned on. I've checked to see that the battery is fully charged. I've tried plugging into other outlets. I've tried removing the battery and the power cord and pressing the power button for 5 seconds. Nothing has worked. When I put my ear up to it while pressing the power button, I can hear it try to start and get about 2-3 seconds in to start up and then a click and nothing. Does anybody have any idea what the heck has happened here?
    15" MacBook Pro   Mac OS X (10.4.6)  
    15" MacBook Pro   Mac OS X (10.4.6)  

    actually i pass the 15 first days, i bought the mac in may, but here in spain the electronic components have a 2 years guarantee, i'll took to the store i bought soon couse it`s no normal so much hot

  • Brand new zen 20g won't turn

    I got new zen 20g yesterday. I turned on the zen when it was charging and it freezed on the start screen. after i reseted the zen two or three times then it was working. today the same problem, but i can't reset it.when i pressing the paper clip it turn off,but remove it,the zen turns on and freezes on the start screez. i try to access rescue mode,but it same as reseting the zen. because i can't turn off the zen, the rescue mode maybe no working.
    really upset!

    I suggest you try a -to- exchange (where you get to change your faulty product for a brand new set with sealing and all that. Creative provides this service. Contact the customer support/retailer before doing it.

  • Brand new macbook pro won't turn on

    I bought the new macbook pro on May 15 2010 from Best Buy. It has up til now been working great. When i tried to wake it from sleep today it would not turn on. It isn't even charging with the power cord in (the little light on the power cord isn't on). I guess I bought a brand new dud. Any suggestions?

    wow thanks guys. So I took it back to best buy today and of course the Geeksquad guy comes back to me and says it was working. Apparently the battery drained down to 0. I have no idea how exactly that happened. I always leave it plugged in and it was the last time i used it before it stopped working. i put it to sleep, and when i tried to wake it the next day i got absolutely nothing. I did try other outlets, and was able to function my PC laptop on those same outlets, but for whatever reason my MAC wouldn't even charge (the little light on the power cord didn't light up when it was plugged in). Ugh. Anyway, so all is well now i guess, cause it's working. I still don't understand how it was able to drain itself all the way to 0 while asleep and then refuse to charge no matter what outlet i tried. Geeksquad guy said the adapter was fine. And my outlets worked when i plugged other things into them. Guess i'll leave well enough alone?

  • Brand New iPod classic won't turn on.

    Minutes after getting home with my new iPod I plugged it into my computer and synced my library with it, afterwards it asked me to install an update and I let it, it told me it was going to reboot, it shut off and now it won't turn back on. I know there's some life in it as when I hold down the reset combo i hear windows indicate that I've disconnected and reconnected a USB device however nothing displays on the screen and iTunes tells me that it cannot recognize the iPod. Any help would be greatly appreciated.

    Just as an additional note now when the I connect the iPod windows lists a "Apple Recovery (DFU) USB Driver" in device manager.

  • Brand new iPad mini won't turn on

    I just got a brand new iPad mini not even 24 hours ago. I've taken absolute perfect care of it and its been working fine, but I was just listening to music on it with the charger plugged in, and all of a sudden it just blacks out. I've tried everything including pressing the on/off and home buttons at the same time but nothing works. Please help!!!!!!!!

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Brand new iPhone 6 won't turn on

    I had my new iPhone 6 yesterday and everythings seems to be fine. It had more than half charge with no open apps on the background when i went to sleep and it was turned off in the morning. The alarm had not ringed. So i have tried everything including hard resetting, charging and reading everything i could find. Yet, there is no response from the device. Can someone please comment if they are able to solve this without having to go to store again.

    How long did you try and charge it? Plug the device in and make sure that you have allowed it to charge undisturbed for at least 30 minutes. With it still connected to the charger, hold the sleep/wake and home buttons together until you see the Apple logo and then release the buttons. This could take up to 30 seconds. The phone should reboot at that time.
    If this does not help, then make an appointment at the Genius Bar of the nearest Apple store or authorized Apple service provider to have the device looked at.

  • Brand new Iphone 4s won't turn on or reset

    I 've upgraded my phone and got the 4s, excited times although It won't charge either on the socket or laptop. It did charge on the first time from laptop but run the battery out so quick, just turned it on, no phone call, nothing and it went dead in 5 hours. Got home the night, plugged it in my laptop and got really hot and frezed the laptop so needed to unpluged it.
    Itunes not recognise it either...
    I tried to reset it, nothing. Apple proving that they product are really diferent than the others

    Apple will not touch your phone since you changed the screen yourself.  Bring your phone to a 3rd party repair shop and see what they say.

  • Brand new iPad 2 won't turn on

    I literally just bought my iPad 2 about 4 hours ago. It worked at the Apple store, and then when I turned it on at home, it worked for a grand total of 5 minutes before the screen went black. I haven't been able to turn it on since. I've already tried holding the sleep and home buttons for 10 - 15 seconds about 10 separate times and the apple logo never comes up. I've even held both buttons for over 2 minutes and still nothing. I  tried this without the charger, then I did try to with the adapter plugged in. It's not even recognizing that it's being charged. That aside, the battery should already BE fully charged because when it was working an hour ago the battery sign said I had 76% left. I'm a little irritated since I just got it, but any suggestions, or did I just get a lemon?

    You actually sound as though you're doing everything about right, with the following one suggestion: Plug it in to the Power Adapter and leave it plugged in for a good 20-30 minutes or until you see and hear it come back to life.
    The iPad does go dark and silent when the battery goes completely flat and you really should confirm that that's not what's going on, regardless of whether or not you think that should be happening. For example, it's possible that your battery's metering was, is, out of whack.
    Anyway, if that doesn't bring it back to life and you can't make it react at all, view it as a lemon and cart it back. It's rare to have that happen, but they are machines, built by men, and ...... you got lucky.

  • My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    Press the escape (esc) key to exit full-screen mode.

  • My brand new ipod touch won't let me download apps.

    My brand new ipod touch won't let me download apps.  I put in my password and then get a screen that says "Download Now".  I can't press the okay button to start the download.  What should I do?  All of the other buttons on the screen work, so I don't think it is broken.

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.

  • How do i install boot camp on a brand new 3tb iMac osx 10.8.2

    how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

    Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

  • Brand New Samsung s4 Won't Install Apps

    My Samsung S4 (brand new last night) won't install any apps. I click install, and it highlights like it's going to, but then it does nothing.

        That's odd mmchenry, let's get to the bottom of this. Are you trying this on 4G LTE or wi-fi? Launch your Play Store, select the Menu icon on the top left>Settings>Is the option to require a password enabled? If so, disable it. You can also try Settings>Application Manager>Playstore>Stop. Let me know if this works.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

Maybe you are looking for

  • Unified Timeout Issue in BPEL

    Hi all, We have two BPEL processess one ReqCS which is the "calling BPEL" and PS which is the "called BPEL". The called BPEL PS has a number of calls to database and wrappers. The problem is that the ReqCS BPEL which is calling the PS BPEL gets fault

  • Failed download list appearing repeatedly even after removing it from history ?

    I had downloaded some power points n articles from google drive . some of them were failed to download. i deleted them from history. i uninstalled mozilla and installed it again but still as i start a new session download symbol gets activated and li

  • How to wrap a stored procedure that outputs PL/SQL records for JDBC?

    Hello everybody, Is there an example for wrapping a stored procedure that outputs PL/SQL records and/or PL/SQL tables of records, so that it can be called from JDBC? Since this is not possible with the Oracle JDBC driver, Oracle recommends "To wrap a

  • Can we undeploy the application while the server is down?

    Hi Experts, We ran into a problem when we deployed the Web Dynpro application and restarted the instance because we made some change on the rfc. Unfortunately, the server never came back up since then, and we are unable to deploy the application anym

  • Photoshop 12 error 1935 roll back

    I have received the error 1935 the roll back error in windows for photoshop 12 I have tried to resolve it but the file 00BE does not show on the C: drive