Brand New 40E210U Sound But no Picture

I just bought this tv just set it up. When i turn it on i get picture and sound for 5 secounds and then the picture disapears. the tv still responds to the remote changing channels and volume but the picture is gone. I can turn the tv off and the picture comes back again but then disapears.....
I did have the tv shipped up about 5 hour drive in a semi truck in the cold, could this be the problem for the tv???

Try turning it off and unplugging it completely, including from power. Leave it like that for half an hour, then reconnect it and try again. If it continues to give you trouble, I'd suggest contacting support at (800) 631-3811.
- Peter

Similar Messages

  • I can hear sound, but no pictures, on some news internet locations.

    Greetings to all, I have a Windows 7 64--bit laptop. I can hear sound but no pictures. Why is that ? Thank you. Ldxrunner.
    Solved!
    Go to Solution.

    Greeting Hiro, I can hear sound at http://news.yahoo.com/video/ecuador-volcano-erupts-045906534.html. At first, I see a black square, then I see bluish circle, followed by musical notes.Then the screen stays black. I see a black square and then after the video ends, I see in the upper left corner of the black square, a replay icon. I have VLC  version 2.0.3. I tried to see if I have Windows Media Player in Programs and Features and I do  not see it listed. I have Windows Media Center. Thank you for your response. Ldxrunner.

  • Air has sound but no picture

    I have a new iMac and apple tv. When trying to use airplay to mirror video using safari on my iMac to apple tv, alI get is sound but no picture. Can I get the picture??

    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of comments? You might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • VideoDisplay playing flv with sound but no picture...

    Hi Everyone,
    I'm hoping someone can help with an annoying problem that
    isn't making much sense to me.... I have an mxml component that is
    based on an HBox, which houses a single Video Display control. In
    the main application file I add this component which houses the
    Video Display control to a canvas using addChild. What I then do is
    I play different flv files by containing each flv file name in an
    array, and then bind the next flv name to the source of the Video
    Display control in order to play the correct video... so in other
    words...
    <!---------------------------------------------------------------------->
    <mx:Script>
    <![CDATA[
    [Bindable] private var _arrFLVs:Array = new Array("vid1.flv",
    "vid2.flv", "vid3.flv");
    [Bindable] private var _currentFLV:String;
    [Bindable] private var _i:int;
    public function init():void
    _currentFLV = _arrFLVs[_i];
    ]]>
    </mx:Script>
    <mx:VideoDisplay width="398" height="282"
    id="videoDisplay" autoPlay="true" source="flvs/{_currentFLV}" />
    <!----------------------------------------------------------------------->
    I have other functions which increment the _i variable. So
    basically what happens is when the video has finished playing, an
    event handler executes which is listening for the end of the video,
    the event handler then executes another function which removes the
    component with the video player from the canvas and adds a
    different component to display a series of images, once the images
    has finished cycling through what it needs to cycle through I
    remove that image component and add the video component back onto
    the canvas to display the next flv. This process repeats itself
    once all videos has been shown and then starts over again. The
    problem I'm experiencing is that every now and then when the video
    is supposed to be played, it gets added successfully to the canvas
    using addChild, the correct source gets assigned to the video
    player, but i see no image when it starts playing. I hear sound,
    but no picture. I know the correct source is being assigned to the
    video player because I trace it before and while its playing the
    video, aside from tracing the source, i hear the audio of the flv
    currently playing so i know its the correct flv - only problem is
    that there is no picture. The picture not displaying happens
    randomly, so for example if the first 4 flv's have finished playing
    the 5th won't show a picture although i hear the sound, then the
    6th will work fine. When the entire process begins again, the 5th
    will work fine, but the 6th and 7th flv won't. This is what totally
    confuses me.
    What I don't understand is if the correct source has been
    assigned to the video display control and the correct flv starts
    playing, why do i hear sound but no picture?
    Could this be some sort of bug in the flash player? I'm using
    Adobe Flash Player 9,0,28,0.
    If anyone can provide me with some advice/opinions/idea to
    give me some sort of clue that would be grand :).
    Thanks for your time,
    - Tony

    I had this problem before. I found that if the VideoDisplay
    component had not finished all inititialization functions before I
    assigned the new flv, then I got sound with no video. Try listening
    for creationComplete for your VideoDisplay component before you
    assign the video source to see if that solves your problem.
    Vygo

  • Adobe Media Encoder CS4 converted FLV files have sound but no picture

    Hi,
    It would be great if anyone can help - I am using the latest trial version of Flash CS4. I have used the Media Encoder to convert mpg4 files to FLV however the resultant files play with sound but no picture - just a black screen. Is there a solution to this issue?

    mostly this problem is caused by lacking of
    some nessery codec. Which means when reencoding your video to flv, it can not generate the video.
    Does Riva FLV encoder needs any extra codec? I am using Moyea Flash Video MX 6. It do not need any extra code. It needs in the former versions but in version 6 it can convert nearly any video format now.

  • Stor.e TV + - playing .mkv files have sound but no picture

    I've just transferred all of my .mkv files onto my store TV + but most of them have sound but no picture?They play fine on my PC...
    Also,anyway of changing the icon on the folder to the actual dvd cover on the store TV +?Sick of looking at yellow folders!!
    Thanks..

    Hi
    Found the StorE TV+ specifications on this Toshiba page:
    http://www.toshiba-multimedia.com/eu/store-external-hard-drives/tv-plus/
    The Store TV+ supports the video formats:: MPEG1 (DAT, MPG), MPEG2 (VOB, MPG, TS/M2TS/TP TRP), MPEG4 (AVI, MP4, MKV), VC-1 (WMV), H.264 (AVI, MKV,MOV, MP4), RM/RMVB (RM/RMVB)
    The MKV files are supported by MPEG4 and H.264 video format.
    Are the files recorded in this formats?
    How about playing other files i.e MPG or AVI?
    Furthermore I would recommend checking the connection to the TV.
    Here is a user manual which I found on the Toshiba page:
    http://www.toshiba-multimedia.com/Global/Manuals/Store/Manuals/STORE_TVplus_User_Manual.pdf
    It shows you how to connect the Store TV+ correctly.

  • Uploaded my pictures from my iPhone to my MacBook- Some of the videos I made show that they imported and play sound, but no picture- are they gone?

    I Uploaded my pictures from my iPhone to my MacBook… Some of the videos I made show that they imported and play sound, but no picture… are they gone?Becuase they offer to delete what was imported, so to save space i did... Is there anything I can do to restore the picture?

    Do your videos play in QuickTime Playerwhen you reveal one of them in the Finder with "File > Reveal > Original"? Try to open the revealed movie in QuickTime and see if it plays.
    Check the format of the movie. You can see it in the Inspector in QuickTime Player from the "WIndow" menu: Window > Show Inspector.
    iPhoto does not support all movie formats and codecs that QuickTime player can play, and not all frame rates.
    See: Using AVCHD video with iPhoto '11
    If the movie does not play in QuickTime Player either, install QuickTime 7 for more codecs.

  • I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    Welcome to the Apple Community.
    Your phone doesn't do mirroring, only the 4S will do that. It only does basic AirPlay.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

  • Sound but no Picture

    I have been watching full episodes of the Young and the
    Restless at cbs.com for weeks with no problems, Now when I try to
    watch an episode I get sound but no Picture. I also watch full
    episodes of Lost at abc.com both use Adobe flash player 9 I can
    still watch Lost but not The Young and the Restless. Can someone
    help me resolve this problem. I use Windows XP I am not computer
    savvy so please be Patient with me.

    Important Note: These online forums are for user-to-user
    discussions of Adobe products, and are not an official customer
    support channel for Adobe. If you require direct assistance, or
    prefer to contact Adobe support staff directly, please contact
    Adobe support.
    Please respond with helpful details.
    What is the name (manufacturer) of the Graphic Card?
    If the driver date is April 5th 2005, it sounds like you need
    to update the driver.
    Important Note: These online forums are for user-to-user
    discussions of Adobe products, and are not an official customer
    support channel for Adobe. If you require direct assistance, or
    prefer to contact Adobe support staff directly, please contact
    Adobe support.
    http://www.adobe.com/support/contact/

  • Videos in email have sound but no picture since I updated to Lion

    I recently updated to Lion and now when I open videos in email I have sound but no picture.

    AOL mail provider.  I have to click on Quick Look to make anynthing happen.  I then click "Open with WMV Player".  Screen is still black.  I click the PLAY button.
       I have sound but no picture.

  • Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

    Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

    Bigal.seamills
    What is the driver version for your NVIDIA GeForce GT640?
    There is a known issue specific to Premiere Elements 10 and NVIDIA GeForce. The Announcement at the top of this forum tells it all - detailed description of problem, references, fixes, and fix details.
    The following is a copy paste of that Announcement....
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card
    and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your
    first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that
    it is up to date.  
    Since October 2013 to the present, there have been a growing number of reports about display and
    unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer
    has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back
    the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver
    roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10.
    Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.   
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675  
    Older NVIDIA GeForce drivers can be found  NVIDIA Driver Downloads - Advanced Search   
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for
    the driver roll back can be found  http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    Please refer to the following for the driver version history of your NVIDIA card
    Based on history, you should be using
    GeForce 320.18 Driver
    320.18
    May 23, 2013
    Please review and consider and then let us know the results.
    Thank you.
    ATR

  • Tv has sound but no picture

    My hp tv model # PL5060N has sound but no picture tv is wall mounted

    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?
    If the problem persists....
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • HT4437 I have sound but no picture using my Apple TV

    I am trying to watch sky sports from my iPad using the Apple TV, I have sound but no picture?

    When I first turn it on I have sound and picture. After a couple min screen goes black but there is sound. Doesn't matter what I'm watching, Netflix, Hulu, movies from iTunes. We have unplugged, rebooted and prayed to the Aplle TV. Sometimes it works, sometimes no. I see people are having trouble since update.

  • My ipad 3 has sound but no picture, what could it be

    My ipad3 has sound, but no picture comes up.  What can it be?

    Press and hold both power and home buttons for about 10 seconds till the Apple logo appears. Then release buttons and wait for your iPad to start

  • My imac has sound but no picture?

    My IMac has sound but no picture? I've tried everything but a hard restart. Anyone else know a solution? Oh by the way, my eight your old son was the last to use it but swears he didn't press anything.

    This is the Mac Pro desktop forum. I requested your post be moved to the iMac forum.

Maybe you are looking for