Brand new (7 hours old) iPhone4 camera shutter freezes shut?

Hi guys, got my new iPhone 4 today from the well know company beginning with V.
Got it all up and running fine.
Only after a couple of pictures the shutter freezes shut and before it happens the picture i manage to take have loads of funny lines going through them.
Is this a common issue? have you heard of this before? I've only taken about 5 pictures!!!
So the question is, is there an easy fix? or should i just take it into a voda shop tomoz or take it to apple?
advice greatly received

Have you tried basics from the manual?
Restart.
Reset.
Restore.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

Similar Messages

I have the new iphone 4s and the camera shutter wont open so i can not take photos it is only 4 weeks old dose anyone know why? :(

have the new iphone 4s and the camera shutter wont open so i can not take photos it is only 4 weeks old dose anyone know why?

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?
The next step would be to restore the iphone as new in iTunes. If that doesn't work, make an appointment at the Genius Bar at the nearest Apple Store.
Best of luck.

Iphone4 Camera Shutter doesn't open. only for 32gb?

Iphone4 Camera Shutter doesn't open at all.
Is this only for 32gb?
I found iphone4 32gbs only have this problem..
wot about 16gbs?
anyone has got same problem on Iphone4 16gb?

And what was the point of starting up another thread on exactly the same topic especially when you have already got responses in the original one. Please don't start new threads and or posts on the same topic as it only serves to cause confusion, duplicate answers and make it difficult to have a cohesive discussion. I have already responded to you in your original post about my iPhone 4.
http://discussions.apple.com/thread.jspa?threadID=2578285&tstart=0

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
iMac 27-inch, Late 2012
Processor 3.2 GHz Intel Core i5
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.9.3 (13D65)@

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

My iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist

my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me

uninstall all iTunes,5 programes,this worked for me after reinstall them

Want to sync music from brand new computer as old one was damanged. says all my songs will be deleted. solution, please?

want to sync music from brand new computer as old one was damanged. says all my songs will be deleted. solution, please?

Do you have all of your content in that computer's iTunes library ? There are some instructions on this page for syncing to a new computer : Syncing to a "New" Computer or replacing a "crashed" Hard Drive
And if you have music on your device that wasn't purchased from iTunes and you don't have a copy of it on your new computer's iTunes then there are some programs listed half-way down this page which should be able to copy it back (iTunes will only copy iTunes downloads back from a device) : Recover your iTunes library from your iPod or iOS device

Ipad2 camera shutter freezes, any suggestions on how to fix

My iPad camera shutter freezes, any suggestions

Claudette-
I'm not sure what you mean by "freezes". You could have a defective iPad. If you can demonstrate it to the Apple Store Genius, you may get a new iPad on the spot.
One thing you can try is to reset the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting will not hurt anything and sometimes clears up mysterious problems.
Fred

Recently recieved a second hand Iphone 4. I was testing the Camera, the rear one worked perfectly fine, however when i pressed the switch button the front facing camera shutter freezed and started flickering. In order to get it back to the rear camera I

recently recieved a second hand Iphone 4. I was testing the Camera, the rear one worked perfectly fine, however when i pressed the switch button the front facing camera shutter freezed and started flickering. In order to get it back to the rear camera I have to reset my settings. Does anyone know why the front facing camera is doing this and how i can fix it.
iPhone 4, iOS 5.1.1

I would ask the person you received it from if they've had this issue.
You can completely close out of the camera, then do a reset, hold down the home/power button together until yo usee the apple logo and then release, then wait for you phone to boot back up.

Can I sync new iPhone5 from old iPhone4 in iTunes on new computer?

I have an old iPhone4 & a new iPhone5 that I am dying to use but my laptop with iTunes on it died before my new phone arrived & I am a bit technically challenged. I have been given the use of my cousin's old windows laptop & I have created a new user on the laptop and installed iTunes but I cannot see any of my music, aps etc on there so I am not sure if I’ve done it properly. I can view my account details and that’s it. So I don’t know if I’ve done it properly. I have iCloud and have set it up on the new laptop too, I can see my contacts & calendar but I cannot see photos in my Photo Stream album where it said they should be, which makes me wonder if I have set that up properly either. I really don’t want to lose my latest photos since syncing my phone the last time. I do not know if I am able to retrieve anything from my old laptop at this stage but I’d really like to start using my new iPhone in the interim of finding out. Can anyone help me? If plugged in my old iPhone4 into this new computer would it sync all my stuff on there into the iTunes on this new computer? And then would I be able to plug in my new iPhone5 to this computer & it would sync all my stuff on to the new phone?

iPhones are not backup devices.
Use the backup of the old computer to put everything on the new computer.
Then you can sync the new iPhone and get all the content on it.

Did anyone else get a brand new mac book pro that came with items already in the favorites tab?

just bought a brand new mac book pro went online and noticed that there were already items saved to favorites, strange things about pumpkin cheesecake.

You could have purchased a refurbished computer.
Take it back and voice your concern and where ever you purchased it from will probably swap it out for you

Brand new K8T NEO-V board restarts instead of shutting down from Windows

Tonight I installed the brand new board from MSI. It is a replacement for a defective one. When I click on shut down in Windows XP Pro, it shuts down and then immediately powers back up.
ALL the parts are the same as before, the only change is the replacement motherboard. The new one is the exact same model as the old one, so nothing has changed. The old one powered off fine, it's problem was that the USB ports stopped working. I changed nothing in Windows either. I am using the defaults on the BIOS. Made sure to set it to defaults to try to fix this problem.
I also unhooked the reset and power buttons to see if perhaps they were defective. Also pulled out all the cards except the video. None of those things made any difference. It was a long-shot, but I tried them anyway.
Since setting the BIOS to default settings didn't help, I went into the power management section of BIOS and turned all the wake up features to disable. That also made no difference.
When I searched for this problem on the forum, I found two references about a year ago. They seem to have the exact same problem so I tried to do what the suggestions for those were. That made no difference. There was a reference to APC or something like that in Windows control panel. I am not familiar with whatever it said and I could not find it in the control panel. It should be set to power down when I tell it to though. I am not aware of any setting in Windows that would make it not power down and stay off.
It can not possibly be the other parts because they all worked fine with the other motherboard, but here is the list anyway. The power supply is an Antec 500 watt, AMD 300+ CPU, 2 sticks of 1GB RAM, Seagate 300GB PATA hard drive, ATI APG video card.
Any ideas?

Quote from: dmcomputerguy on 28-February-07, 15:13:22
Tonight I installed the brand new board from MSI. It is a replacement for a defective one. When I click on shut down in Windows XP Pro, it shuts down and then immediately powers back up.
ALL the parts are the same as before, the only change is the replacement motherboard. The new one is the exact same model as the old one, so nothing has changed. The old one powered off fine, it's problem was that the USB ports stopped working. I changed nothing in Windows either. I am using the defaults on the BIOS. Made sure to set it to defaults to try to fix this problem.
I also unhooked the reset and power buttons to see if perhaps they were defective. Also pulled out all the cards except the video. None of those things made any difference. It was a long-shot, but I tried them anyway.
Since setting the BIOS to default settings didn't help, I went into the power management section of BIOS and turned all the wake up features to disable. That also made no difference.
When I searched for this problem on the forum, I found two references about a year ago. They seem to have the exact same problem so I tried to do what the suggestions for those were. That made no difference. There was a reference to APC or something like that in Windows control panel. I am not familiar with whatever it said and I could not find it in the control panel. It should be set to power down when I tell it to though. I am not aware of any setting in Windows that would make it not power down and stay off.
It can not possibly be the other parts because they all worked fine with the other motherboard, but here is the list anyway. The power supply is an Antec 500 watt, AMD 300+ CPU, 2 sticks of 1GB RAM, Seagate 300GB PATA hard drive, ATI APG video card.
Any ideas?
bretware and Hans, thank you for the replys. The BIOS was already set to power off after a power failure so I did not need to change it. I tried booting into safe mode and shutting off; same results. The network adapter is a VIA chipset, rather than the Realtek; the wakeup setting is unchecked and grayed out because I unchecked the option to power the adapter off when it is not used; that also made no difference.
I will now tear the machine apart, yet again, and breadboard it on the bench with a different power supply. I sent an urgent e-mail to MSI, hopefully they will respond in the next couple of hours.

How do I uninstall Mavericks and recover Lion? I have a brand new iMac and web pages stall or freeze since I installed Mavericks. I can't get it to download software for my printer when I connect it.

I have a brand new iMac. It was working fine until I downloaded Mavericks. Now I have web pages that freeze while trying to load. The blue in the address bar stalls and freezes. If I try to load from page 1 to a later page, or reverse that, I also have the same problem. I tried to connect my printer for the first time, and again, the blue progress bar froze. Then I got the yellow triangle telling me there was a connection problem. My internet connection is via an Air Card as that is my only option where I live. I packed up the whole new iMac and took it to my Air Card provider, where they also have very fast Wifi, and they had the same problem with Wifi. I use my Air Card with my MacBook and it works JUST GREAT! I really want to return to Lion. HELP.

The only way to retutn to Lion is to format your drive (erase, lose all) and either:
1. clone back the clone copy i hoep you have, or
2. first backup your files, then format and install Lion again
But really, mavericks works great. You have a problem. Find out why. First, what unusual software do oyu have installed that may be conflicting with it? Virus, system modifiers, etc? Second what OLD software do you have that might be the problem. finally, you might need to do a re-install if something errored during install.
Grant

N8 Camera shutter permanently shut

My N8's shutter is stuck shut. I turn the camera function on and everything loads up BUT, the shutter doesn't open at all. So every picture is complete darkness. I can focus (on pitch black), change all the settings but to no avail. The only thing I see on the screen is total pitch black. The black shutter makes a funny noise and seems to fail over and not open.
I'm sad: please help.
Things I've tried: (1) switch from primary to secondary camera, (2) Use other apps like Qik and Fring, (3) Power the phone on and off.
I think it's hardware-related... booooooo
Solved!
Go to Solution.

My N8 does exatcly the same, the camera software loads and the shutter stays shut. Yet sometimes it works, randomly. Works, then doesn't! All since I did the Anna update last week. Has you problem been solved by sending it off? I am reall trying not to have to send it off, but if I do, how long might it take to come back?

P1102 brand new (1 week old) prints wrongly from Power Point

When printing directly from PowerPoint a circle that is defined as all white filled witha white edge line, this shows correctly on screen but when printed, the edge line becomes black.
When printing the same using pdfFactory Pro and then printing on the P1102, the printing is correct.
So, the error is in the P1102 driver, being one week old (2014-03-20 purchase date, Sweden)
Have you corrected this error or will I have to buy another brand?
Our old laserjet 1018 does not produce this error but started printing badly after changing toner. So we bought
a new printer, which looks like a bad decision.
Any help out there?

Hi zecharia,
The only thing I can think of at this point is to ensure the printer is set as the default printer in the control panel. I wonder if the program is using the wrong driver for the printer.
If the issue persists, I highly recommend calling HP. You said the printer is new, only a week old. HP printers have a 1 year manufacture warranty.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Brand new Ipod touch old library

So I got a new ipod touch and a new macbook. I was able to import my itunes library for my old ipod to the new macbook easily. Now, how do I get my library onto the new ipod touch? If I just plug it in will it sync? I kept the account info the same and authorized the new computer on the account. Can I have two ipods using the same itunes library? TIA

*Can I have two ipods using the same itunes library?*
Yes you can, at the moment I use three different model iPods with the same library. Just connect your new iPod to your computer and follow the on screen instructions to register and name it. It will connect to iTunes and prompt you to automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like. You can leave it at manual update or choose to sync music - selected playlists: How to use multiple iPods with one computer</a

Brand new (7 hours old) iPhone4 camera shutter freezes shut?

Similar Messages

Maybe you are looking for