Brand new battery will not charge

I just bought a new battery for my mac book, because I assumed that my old one had died. However the new one won't work either, and now I am out of the country so no genius bar visits are in my near future. The battery status is listed as uninstalled and there is an x through the battery icon in the menu bar. What am I missing? How do I install it?

Welcome to Apple Discussions!
Reset the SMC, and PRAM. Here are the articles of significance.
http://support.apple.com/kb/HT1411
http://docs.info.apple.com/article.html?artnum=2238
If it doesn't work, run the hardware test that came with the Mac:
http://docs.info.apple.com/article.html?artnum=303081
And if that doesn't work, try to replace the RAM.
And if that doesn't work, take it in for service.

Similar Messages

  • My brand new PB will not charge when in standby or when on

    I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

    Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
    1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e.  it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
    2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
    3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
    4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
    5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
    6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
    Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

  • New battery will not charge - have we missed something obvious?

    My DD has just replaced the battery on her PB. When the power supply (less than 3 months old) is attached, the led shows amber but the battery will not charge. I've tried reseating the battery with no effect. Since I purchased it from an apple dealer, I'll be taking it back tomorrow, but I wondered whether there is something obvious we've missed.
    Thanks
    Jennifer

    Thank you both. Yes I know the battery needs to be calibrated, but as you say, to calibrate, you need to charge, which is a non-starter. I'm going to take the whole thing in (again). I suspect the problem that led to the battery needing to be replaced possibly dealt a death blow to something inside. I don't know whether this is relevant, but before replacing the battery, the charger started to make a loud buzzing noise (I understand - I wasn't here), and with the old battery in place the PB kept freezing and/or rebooting. Only with the battery out and just the power supply in would the PB work. The PB is seeing the new battery, it just wont charge it. I just wanted to make sure there wasn't anything else I could do before taking it in.
    Jennifer

  • New battery will not charge

    Had Genius Bar install a new battery as the old one was not charging. New Apple installed battery will not charge either. Light on T-connector always shows green even after SMC reset and battery will not charge. Any ideas?

    Bring it back to Apple, they may have not seated the cable/connector correctly, or the cableconnector has an issue, or there is a problem with the charging circuit. Bring in your power adaoter with you as well. Apple repairs come with 30 day warranty

  • Satellite L655 new battery will not charge

    Satellite L655 new battery will not charge

    Hello halik
    It is not easy to say what is wrong there.
    Have you bought new and original Toshiba battery with the same part number (model number).
    Is new battery recognized by the system?

  • Brand new phone will not charge

    Just got my new 4S. It will not charge. Apple logo appears when pressing home button, but suddenly disappears or phone goes dead during initial config. Tried different chargers. Have tried charging for hours. Defect battery on a brand new phone?!

    On your Manage Connections screen, click on the Services Status.
    What is the status of the BlackBerry Internet Service?
    Do you see the BlackBlerry dots logo at the top right of the home screen next to the signal bar indicator?
    If not, and if the BIS status is not connected, could be the plan is not yet provisioned by Tesco.
    Then, try this: 
    On your BlackBerry device, go to:
    1. On OS5 devices: Options > Advanced > Host Routing Table > Menu > Register. On OS6 devices: Options > Device > Advanced > Host Routing Table
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Brand new cord will not charge it?

    Okay, so this morning when my mac was charging my dad moved it from the couch to the table, and in the process moved the extension cable it was connected to to the floor, my 15 week old rabbit decided that my lovely white power adapter looked tasty and decided to chew it. I came back to my computer and picked up the long white cord because i was going to move it so my rabbit wouldnt chew it and discovered he already had by the big chew marks he had made where the wires were exposed were sparking. Long story short, i took it to my local apple store they told me it wasnt covered, i payed $89AUD for a new one and got on with my life. I used my mac this afternoon without it plugged in as it was allready charged from this morning. I plugged it in tonight and realised that it wasnt charging. On my bar it says (Not Charging) and then on the drop menu it says.
    Battery Is Not Charging
    Power Source; Power Adapter
    Its keeping it working, but it isnt charging it? My old one and my new one are both 60W. I have tried plugging it into many different places none work. What do you think is wrong?

    There have been a lot of variants of the MacBook Pro since its introduction in 2006. One variant (can't remember which), required a software solution to work with the newer "L" shaped power connectors. Without knowing which you have, the best thing is to see if Software Updates offers you a patch.
    There are also reports of some of the older, silver-key MBPs having a problem with the fit of the new adaptors.
    Lacking that, I'd take the computer and the new adaptor to an Apple Store or AASP and stand there until they can provide an adaptor that works. Leave the rabbit at home.
    Man! I though cats were tough on computer cables!

  • HT1379 New battery will not charge

    I have replaced my battery and reset the SMC.  However, it will still not charge. The battery is brand new

    I suggest a trip to the Apple store and have them either correct the problem or replace the battery.  Do not leave the store until your battery is charging.
    Ciao.

  • TS3274 My brand new iPad will not charge. What is wrong? What should I do?

    Just took it out of the box. It's the best one. It remains at 41% after being plugged in overnight.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
    Since you are a new iPad owner .....
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Brand new phone will not charge after battery low

    My daughter has had her phone 4 days and it has only today died completely it had icon in corner saying off so I put it on charge. But where the battery icon was there was no sign to say it was charging. I left it an hour and nothing so I did a battery pull and it rebooted but then died completely. Still no light on to say charging. I also read on another forum to plug charger in while battery removed but still nothing at all. Also before this when she put her simcard in which is a contract bb sim it was saying it wasn't connected to bb Internet and bbm was not working. Please help

    On your Manage Connections screen, click on the Services Status.
    What is the status of the BlackBerry Internet Service?
    Do you see the BlackBlerry dots logo at the top right of the home screen next to the signal bar indicator?
    If not, and if the BIS status is not connected, could be the plan is not yet provisioned by Tesco.
    Then, try this: 
    On your BlackBerry device, go to:
    1. On OS5 devices: Options > Advanced > Host Routing Table > Menu > Register. On OS6 devices: Options > Device > Advanced > Host Routing Table
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Brand New Ipod will not charge. Too low to turn on. Same icon for 2 days

    I got this baby for christmas and recently it ran completely out of battery and I have had it connected to the computer for 2 days now and still no charge, Itunes does not even recognize it. If you got any help I guess just post on here or email me at [email protected]...
    Thanks,
    Doug
    Dell   Windows 2000  

    I have this problem too. My first generation Nano was revived by a Genius at the local Apple store when he connected it to an AC adapter.
    Unfortunately, it seems that the Nano requires a small charge just to get it to the place where it can recharge using USB.
    The solution: don't let the battery discharge completely, and/or buy an AC charger for the Nano.
    I guess I should also change the settings on the iPod so it goes to sleep after a couple of hours. (I often listen to audio books while going to sleep, so the iPod plays all night, and uses all the battery power.)
    Over the life of the iPod, the cost of an AC adapter is far less than the cost of buying disposable batteries, but it irks me that an adapter is necessary when the rechargeable battery runs out.

  • Ipod touch 4g new battery will not charge

    I replaced the battery and I still get the low battery charging icon. Everything that I read indicated that the problem was with the battery. When not connected, to the charger I cannot get anything to work at all - just a blank screen with no indication that there is any power. The only time I see any indication of life is when plugged in (I see the charging icon and a very low battery image).
    This is the same thing I saw before I replaced the battery so I do not appear to have changed anything. Prior to the problem the iPod was powered off for about a month. I thought that the extended time off killed the battery but now I am really puzzled.
    Any help would be greatly appreciated.

    Bring it back to Apple, they may have not seated the cable/connector correctly, or the cableconnector has an issue, or there is a problem with the charging circuit. Bring in your power adaoter with you as well. Apple repairs come with 30 day warranty

  • Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • HT1379 my battery will not charge on my new mac

    Battery will not charge.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    You can try resetting SMC.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Droid X battery  will not charge when phone is in vehicle mount

    Droid X battery will not charge when phone is in vehicle mount. If you plug phone directly in to car charger it charges fine. This makes using the GPS virtually useless as it runs down the battery very fast. Anyone else have this problem. Other wise I love the phone.

    Many of the Verizon Droid X car mounts have defective wires in them. This problem is widely reported on many forums and websites. You should return your product for a brand new replacement that is not defective  (that is, the car charger will charge your Droid X when it is in the car mount).
    I happen to love the Verizon Droid X car mount. Lot of ways to adjust it from different angles for different placements. Just get a Verizon Droid X car mount replacement that does not have defective wires in it, and it should work just fine!

Maybe you are looking for

  • Delete file from FTP server

    Hi All,  I have a requirement where I need to delete a file from the FTP server. How do I do that? Thanks in Advance. Regards Jaspreet

  • Photo events being duplicated using itunes to sync

    Hi Everyone, does anyone else have this issue, when i goto sync my ipad2 using iTunes, Under the Photos tab where events are listed i have duplicates, triplicates etc etc of my events. Does not affect my Albums, just the events... Strangely enough in

  • Table for logical destination

    hi, logical destinations are defined in which table

  • Boxes appear between letters? need help...

    I am writting a program and want to print the contents of a buffer to a text file, but boxes appear between all letters and spaces in the text file. Any ideas?

  • Nametags will not print logo

    I know this is a stupid question but I waited until the last minute to print nametags and can not get them to print the logo over the name. It is as if the computer thinks they are preprinted with it. It shows up in print preview correctly but it I g