Brand new christmas present...which can't read my music fil
I just recieved this product for christmas instead of an iPod, it looks like a very great device.
Unfortunately, I have been using iTunes to play my music instead of Windows Media Player so all of my songs are of the file format: "MPEG-4 Audio File"
when I tried adding them to my Zen Micro Photo, it said that they had to be converted to a correct file format.
If anyone would happen to have a clue on how I can go about converting them, it would be a very large help to me.
(I did not purchase any of these songs online, I just used iTunes to rip them onto my computer.)
Thank you in advance for any help you can offer, the Zen looks great... its just a bit of a paper weight right now because of the incorrect music format.
ugwings wrote:
Hi Mistaken,?There is another way to convert the MPEG-4 files to MP3 within the iTunes software. In iTunes under edit, Preferences, Advanced tab, click on Importing tab and set the "Import Using" to "MP3 Encoder". Once you have done that, you can bring up a playlist, select all, then right click (if you are right handed) and select "Convert Selection to MP3". The iTunes software will create MP3 files of your music in the iTunes directory which you can copy to your Zen.
It won't do this with purchased music from iTunes as that would get round copy protection. PB
Similar Messages
-
My mom has a brand new Macbook Pro which was set up at the Apple Store and now she cannot get it to accept her log in info. What should she do next?
Thank you sig--it seems in talking to her on the phone that she was not giving me the info correctly and she couldn't get into her bank account, NOT the computer. The computer is fine she was just frustrated with the bank's system and feeling alone with no help handy...
I appreciate your reply. Thank you. -
How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?
If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.
-
ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost. -
After updating os to OSX 10.9.1 I can't open any new pdf files. I get a message saying It may be damaged or use a file format that Preview doesn’t recognise. I can still read older saved files but no new ones arriving by email. Also can't attach a pdf to an email to send out. Any help would be appreciated.
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
I just got a brand new laptop and I can't seem to put music onto my iPhone - help?
I just got a brand new laptop and I can't seem to put music onto my iPhone - help? I'd really rather not completely empty my iPhone in order to have it agree with this new laptop. How do I get them to talk to one another and let me put my music on my iPhone?
The iPhone will only Sync to One iTunes Library at a time.
KlBlair wrote:
I just got a brand new laptop ...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
If you do not have access to the iTunes Library on your Old computer... or its Backup...
See these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem
First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted -
My old computer crashed and I have a new computer. How can I save my music from my IPod to the new computer since it isn't in my Library. I don't want to sync and lose music.
Then you will need to search for a 3rd party program to transfer content
Pasted from another thread
https://discussions.apple.com/thread/2234756?start=0&tstart=0
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola and iDump andiPodRobot.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
More information is contained here.
Copying content from your iPod to your computer - The Definitive Guide. -
I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
llustrate it.
Many thanks in advance for your help.
Donat-Pierre
Attachments:
Demo.acq 248 KB
SCR_EKG_test1b.acq 97 KBThe reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
See the attached example.
The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Read_AK_time_info.vi.zip 9 KB -
I would like to read in and write physiological data which was saved by Biopac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/app156FileFormat/FileFormat.h
tm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/app155macffmt/macff.htm) .
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, because it is for PC I am assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to illustrate it.
Many thanks in advance for your help.
Donat-PierreOne more step...
short are U16 integer
double are double precision float
bool seem to be 2 bytes (= U16)
char are string (variable length)
rgb are U16 integer, with high order byte = 0
rect should be 4 x U16 (top, left, bottom, right)
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.
-
Can I change the file path that itunes reads my music files from?
I have about 65000 music files that i have transferrd from my external to a new laptop internal HD.
I have organised the folders myself as I use a PC and do not want itunes to organise the folders because when I'm searching through music on windows it is sorted out by artists/albums with 'the...(eg The Beatles)' under 'T' instead of 'B'.
Long story short.... Is there any way that I can keep my itunes library as it is on the external HD and copy it to the new laptops C drive, keep all the info (playlists etc) and still have the same folder structure as on the external HD?
Or, is there any way of making windows sort things in alphabetical order like it is in itunes (eliminating the 'the' issue)?The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2 -
How can i read local excel file into internal table in webdynpro for abap a
Could someone tell me how How can i read local excel file into an internal table in webdynpro for abap application.
thank u for your replyDeep,
File manuplations...............................
1. At the presentation level:
->GUI_UPLOAD
->GUI_DOWNLOAD
->CL_GUI_FRONTEND
2. At the application server level:
->OPEN DATASET : open a file in the application server for reading or writing.
->READ DATASET : used to read from a file on the application server that has been opened for reading
-> TRANSFER DATASET : writing data to a file.
-> CLOSE DATASET : closes the file
-> DELETE DATASET : delete file
If file is on the local PC,use the function module GUI_UPLOAD to upload it into an internal table by passing the given parameters......
call function 'GUI_UPLOAD'
exporting
filename = p_file
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = t_data
p_file : excel file path.
t_data : internal table
<b>reward points if useful.</b>
regards,
Vinod Samuel. -
External Table which can handle appending multiple csv files dynamic
I need an external table which can handle appending multiple csv files' values.
But the problem I am having is : the number of csv files are not fixed.
I can have between 2 to 6-7 files with the suffix as current_date. Lets say it will be like my_file1_aug_08_1.csv, my_file1_aug_08_2.csv, my_file1_aug_08_3.csv etc. and so on.
I can do it by following as hardcoding if I know the number of files, but unfortunately the number is not fixed and need to something dynamically to inject with a wildcard search of file pattern.
CREATE TABLE my_et_tbl
my_field1 varchar2(4000),
my_field2 varchar2(4000)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY my_et_dir
ACCESS PARAMETERS
( RECORDS DELIMITED BY NEWLINE
FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION (UTL_DIR:'my_file2_5_aug_08.csv','my_file2_5_aug_08.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;Please advice me with your ideas. thanks.
Joshua..Well, you could do it dynamically by constructing location value:
SQL> CREATE TABLE emp_load
2 (
3 employee_number CHAR(5),
4 employee_dob CHAR(20),
5 employee_last_name CHAR(20),
6 employee_first_name CHAR(15),
7 employee_middle_name CHAR(15),
8 employee_hire_date DATE
9 )
10 ORGANIZATION EXTERNAL
11 (
12 TYPE ORACLE_LOADER
13 DEFAULT DIRECTORY tmp
14 ACCESS PARAMETERS
15 (
16 RECORDS DELIMITED BY NEWLINE
17 FIELDS (
18 employee_number CHAR(2),
19 employee_dob CHAR(20),
20 employee_last_name CHAR(18),
21 employee_first_name CHAR(11),
22 employee_middle_name CHAR(11),
23 employee_hire_date CHAR(10) date_format DATE mask "mm/dd/yyyy"
24 )
25 )
26 LOCATION ('info*.dat')
27 )
28 /
Table created.
SQL> select * from emp_load;
select * from emp_load
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
SQL> set serveroutput on
SQL> declare
2 v_exists boolean;
3 v_file_length number;
4 v_blocksize number;
5 v_stmt varchar2(1000) := 'alter table emp_load location(';
6 i number := 1;
7 begin
8 loop
9 utl_file.fgetattr(
10 'TMP',
11 'info' || i || '.dat',
12 v_exists,
13 v_file_length,
14 v_blocksize
15 );
16 exit when not v_exists;
17 v_stmt := v_stmt || '''info' || i || '.dat'',';
18 i := i + 1;
19 end loop;
20 v_stmt := rtrim(v_stmt,',') || ')';
21 dbms_output.put_line(v_stmt);
22 execute immediate v_stmt;
23 end;
24 /
alter table emp_load location('info1.dat','info2.dat')
PL/SQL procedure successfully completed.
SQL> select * from emp_load;
EMPLO EMPLOYEE_DOB EMPLOYEE_LAST_NAME EMPLOYEE_FIRST_ EMPLOYEE_MIDDLE
EMPLOYEE_
56 november, 15, 1980 baker mary alice 0
01-SEP-04
87 december, 20, 1970 roper lisa marie 0
01-JAN-99
SQL> SY.
P.S. Keep in mind that changing location will affect all sessions referencing external table.
Maybe you are looking for
-
What is the best way to untangle myself from my parent's phone plan while keeping my number?
I know what I would like to accomplish I just need to figure out the correct steps to take. So the situation at present is that I have a line which is tied to my parents Verizon account that I would like to take over. However, I do not wish to alter
-
Palm Desktop Software Data Transfer
I have an iMac OS which is 5 years old. This year I'm going to be buying the most recent iMac Desktop. The only Palm software I make use of is my "desktop software" which I use as an all around replacement for the old day runners. For instance, I u
-
Fiscal year variant is incorrect
Dear all, we have an additional daily ledger and daily fiscal year variant related to each other. While trying to see line items by double-clicking, for example, cumulative balance line in FAGLB03 transaction I get the following error: "Fiscal year v
-
DEV server could not connect to QAS server thru STMS
Hi Experts, Please help, we have migrated our DEV server to another server. My problem now is I cant connect its TMS thru QAS and PRD. here is the ERROR message after STMS> System>create --> domain link. System QAS Command TMS_DLM_
-
Error U44M1P7 with the Illustrator/photoshop/indesign update
Hello, I have an update problem for 6 months only with the Illustrator, photoshop and indesign last update. A popup appears and inform me about the fail of the update, the reason being that an "U44M1P7" error is occured. Could anyone help me to find