Brand New Curve 8320 shuts down and reboots periodically

My Curve 8320 is less than two weeks old. In the last 2 days it has started "timing out" periodically, going to the white screen with timer hourglass, takes several minutes, then when I hit any key I have to enter my password and it starts up again. Any idea as to what causes this and how I can stop it? I have noticed the red SOS icon has been active or at least a few of the times it has happened, could this be the cause?

Similar Messages

Shutting down and rebooting from xfce4 (SOLVED)

I am wanting to shut down and reboot my system via xfce4. right now the two buttons are grayed out. I tried added myself to the power group by doing
gpasswd -a username power
That didn't seem to do anything at all. On the wiki, it talks about using dbus and hal (as an alternative to doing the sudo method) but i already have dbus and hal started by default and the two buttons are still grayed out.
if there is already a message like this please guide me there. Any help would be appreciated.
CORRECTION: adding myself to the "power" group did work.
Last edited by theringmaster (2007-09-12 17:49:24)

zenlord wrote:
Strange - I used the sudo-hack and it worked for me. But after it stopped working, I saw the new instructions and enabled both hal and dbus and voila, everything worked.
I did not add myself to the sys-group, so it should be something else. Did you install the whole xfce4-package or did you select certain packages? check if '# /etc/rc.d/hal restart' and '# /etc/rc.d/dbus restart' change anything...
Zl.
Fyi: i installed xfce4 and xfce4-goodies. I'll try your codes now.

My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?

When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?

Start here.

Computer shuts down and reboots when downloading ios 5

my friend its trying to update his ipod touch 4th gen 64gb to ios 5 but both his i mac pro and windows 7 computer shuts down and reboots with the download gets to 50%

Searching the forum before posting is a good idea. This subject has been covered ad nauseum
Bottom line: Uninstall the Google Maps update by going to Settings>Applications>Manage Applications>Maps and hitting the Uninstall Updates button.
There is a bug in the GPS driver. Lenovo claims to be working on it. Do not install the maps update until Lenovo fixes it.

My iPad keeps Shutting down and rebooting itself, why?

My iPad keeps Shutting down and rebooting itself, why?

Aoifemarie wrote:
My iPad keeps Shutting down and rebooting itself, why?
Because there is something wrong with the iPad? Try restoring the device with iTunes. Start with that.
Use iTunes to restore your iOS device to factory settings

I have ipad mini 2 updated to ios 7.1.2. Now ipad keeps shutting down and rebooting to the apple logo. I factory reset and redownloaded software in recovery mode. Still happening. What else can I do?

I have ipad mini 32gb. I updated to IOS 7.1.2. Since then ipad keeps shutting down and rebooting to the apple logo. It happens so many times I cannot use the ipad. I have tried factory reset and reinstalled software in recovery mode. Ipad is only 1 1/2 years old and in great condition. Is there anything else I can do besides soend $200 to fix it?

Sounds like a hardware issue to me going by the CRC error you mentioned. I'd make a Genius Bar reservation (you'll need your Apple ID) if you have a nearby Apple Store and get it evaluated. The evaluation is free but repair/replacement could incur other charges.
Genius Bar reservations:
https://www.apple.com/retail/geniusbar/

X shuts down and reboots

Has anyone experienced the phone shutting down and rebooting. I can have my phone sitting next to me and it will go to a black screen and the eye pops up and reboots.

Rebooting of the DX was the major point why I returned that phone.
I had my DX for 4 days and it was rebooting constantly, about 7 - 9 times a day.
VZ tech told me that it is a known issue with DX and therefore I returned it thinking to get Incredible.
However, my brother-in-law that has Incredible and his phone reboots too (though not as often as my DX). That makes me thinking what if problem is not a phone (Droid X) in particular, rather than Moto Blur skin or Android OS in general.
I was reading that rebooting may in fact be related to Advance Task Killer if it is being set to Auto-Kill mode as it could be killing some running processes which are required by OS.If Auto-Kill is disabled and applications are being killed manually it should resolve reboot problem.
DX hardware has 512 MB of RAM but in my case I was ending up with less than 50 MB (less than 10%) of RAM only after an hour of phone just sitting there without single application being touched by myself. I understand that about 200 MB is being used by OS and another 100 MB is being used by all essential subprocesses (Moto Blur) but that should leave me with 200 MB of RAM not 50. Those little pesky bloatware programs that VZ forces on you should be either disabled, uninstalled, or not being loaded into memory constantly.
In regards to controversy of needed or not Advance task killer, I am personally felling that I needed that just to kill all of the bloatware that VZ placed on that phone and which is being loaded constantly into memory. So as far as I am concern, issue with reboot is all VZ fault and that is why this is a "known issue" for them.

Shut down and Reboot problems

Hi All
I hope I can find help for my problem as it is getting really frustrating. I have Lenovo X230 tablet which used to run fine until it suddenly will not shut down or reboot. The screen will turn black however the small led lights on power and other button
will remain on and the the laptop will remain like this until I press the power button to physically shut it down. When I tried to restore the system to an earlier point, the laptop will not reboot and I had to press the button again to shut it down and then
power it up. It showed after that reboot was successful but to no avail. I tried to reboot it to even an earlier point (still I had to manually reboot it) but it failed. All drivers are up to date and I always install Windows updates as soon as they are out.
Still I have to push the power button when I install new windows updates when reboot is required because the screen will go black as I already mentioned with the power still on. I do hope to get helo with this.
Thank you
Qas

Hi,
As this problem occures with no symptoms, in my opinion, it would be better to make system restore to revert your system to a former normal time point for test.
If the problem persists after system resotre successfully, it would be better to contact Lenovo support to check Hardware problem.
Roger Lu
TechNet Community Support

Help! My new A2107 tablet - shuts down and restarts...

Hi,
just got a A2107 from the Lenovo outlet. Just getting use to it, found and downloaded the latest updates for it.
The problem is while using it - it just powers off and restarts - on it's own. It was doing this before the updates were applied - now it's more useable, but the problem is still there - it shuts down and restarts!
I can leave it on a table not running any apps, after about a half hour I'll hear it start up after it shut itself down.
Is there something I can do to fix this or do I need to send it back??

hi juli,
what g5 have you got. is it the new duel core models, if so the check the connections on the back of your hdd and the logic board. as these work loose very easily. what it sounds like as if the connection is just touching on the drive or logic board. i have the same problem with a s-ata drive, and the cable just slides off all the time. what seems to be happening is that when it disconnects the comp shuts down, and at the last second with the fans slowing the machine get a slight vibration just enough to connect again. and the comp must interpit the connection as a start-up. not sure about the start-up But possible. or it could be a kp, anyways check your connections.
john

HT1430 New iPhone 4 shut down and wouldn't restart.

I have a relatively new iPhone, still under the 90 day warranty. Today it just stopped responding. The screen went dark and I couldn't turn it on. I was able to reset it, but was I wondering why it shut down and wouldn't turn back on. Is this a common iPhone issue, or should I have a tech check it over before my warranty expires in two weeks?

hi im new here.. apparently the problem keeps on repeating after turn back on. is there any other solution?

Satellite U305 shuts down and reboots when trying to copy/paste

This is the oddest thing and hopefully someone here can help....
When I try to copy and paste, either through the use of the touchpad (right click, copy = right click, paste) or by using ctrlC/ctrlP, the laptop screen goes white, then shuts down and restarts. This only happens when I am using copy and paste.
Any thoughts? I have no idea why this is happening! Help!

Maybe this helps.
How to repair the operating system and how to restore the operating system configuration to an earli...
Which Satellite U305?
-Jerry

Have new iMac osx 2.5 intel and a few times now when in mail it starts to lag, rainbow spins and things go awry. Have to shut down and reboot to get it back to normal. Also a sender rang to say his email to me had been opened 140 times.....whats that???!!

Have new imac 2.5 mid 2011 OS X and macmail has a few times started to lag.....slow to accept writing and the rainbow spins and seems to stop it. have to shut down to get it back to normal. Very frustrating when in the middle of a message. Any ideas whats wrong ....whats happening...how to fix...Also a sender rang me to see if I forwarded their email on, and said that particular email had been opened 140 times.......I did not send on....any ideas about that one also.
Cheers Rhonda

Rhonda you Force Quit and app by click the Apple symbol in the upper left and selecting Force Quit... and then select the app that isn't responding and Force Quit it.
I'm not sure what is wrong with your Mail system but I'd recommend starting over with it. You can find out how in Mail Setup, Troubleshooting etc... If you still have trouble then contact AppleCare, you have 90 days of free phone service with AppleCare......why not use it?

Brand New Pavilion DV7 Shut down twice when first started, and keeps shutting down for no reason

The problem I have with my new HP Dv7 is it keeps shutting down. This can't be due to over heating as when I first switched it on and went through the setup process it restarted twice. Took me three attempts to get just past the registration section.
Reading on the forum pages it looks like quite a few people have had the same problem. Is there a software fix/update to solve this problem? or do I have a faulty laptop?
Thanks
Marc

Please identify your notebook/pc with more than the series number. Look at the base/rear/side of the notebook/pc at the barcoded sticker. Post items numbered 1 and 2 on the following image.
Post the installed operating system version ( and whether it is 32 or 64-bit)
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

OS X server shut down , and reboot every days at 4 am

I shut down my server and every days at 4am , the server is rebooted
I don't activate the auto start function
See my system.log
Jun 20 18:42:07 jerome ntpd[136]: time reset -1.165220 s
Jun 20 18:45:27 jerome shutdown: halt by jmorgado:
Jun 20 18:45:29 jerome SystemStarter[3642]: authentication service (3677) did not complete successfully
Jun 20 18:45:30 jerome SystemStarter[3642]: IP Failover (3685) did not complete successfully
Jun 21 04:00:02 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 21 04:00:02 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 21 04:00:02 localhost kernel[0]: migtable_maxdispl = 70
Jun 21 04:00:02 localhost kernel[0]: 93 prelinked modules
Jun 21 18:38:24 jerome SystemStarter[5371]: IP Failover (5401) did not complete successfully
Jun 21 18:38:25 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[184]: exited abnormally: Terminated
Jun 22 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 22 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 22 19:25:47 jerome SystemStarter[5645]: IP Failover (5675) did not complete successfully
Jun 22 19:25:48 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[185]: exited abnormally: Terminated
Jun 23 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 23 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 23 04:00:01 localhost kernel[0]: migtable_maxdispl = 70

I shut down my server and every days at 4am , the server is rebooted
I don't activate the auto start function
See my system.log
Jun 20 18:42:07 jerome ntpd[136]: time reset -1.165220 s
Jun 20 18:45:27 jerome shutdown: halt by jmorgado:
Jun 20 18:45:29 jerome SystemStarter[3642]: authentication service (3677) did not complete successfully
Jun 20 18:45:30 jerome SystemStarter[3642]: IP Failover (3685) did not complete successfully
Jun 21 04:00:02 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 21 04:00:02 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 21 04:00:02 localhost kernel[0]: migtable_maxdispl = 70
Jun 21 04:00:02 localhost kernel[0]: 93 prelinked modules
Jun 21 18:38:24 jerome SystemStarter[5371]: IP Failover (5401) did not complete successfully
Jun 21 18:38:25 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[184]: exited abnormally: Terminated
Jun 22 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 22 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 22 19:25:47 jerome SystemStarter[5645]: IP Failover (5675) did not complete successfully
Jun 22 19:25:48 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[185]: exited abnormally: Terminated
Jun 23 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 23 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 23 04:00:01 localhost kernel[0]: migtable_maxdispl = 70

Brand New Curve 8320 shuts down and reboots periodically

Similar Messages

Maybe you are looking for