Brand new E90 map loader error

When running the map loader first time it doesn't recognize neither the E90 in transfer mode or the memory directly connected to a usb port on my laptop. and map loader close up right away.
PC suite works fine and allows me to install any program in the phone memory or memory card.
Card is a 2GB which has more than 1.5 GB free.Message Edited by robmir on 28-Aug-200710:52 PM

Hi robmir
Have you run Maps application at least once with your memory card in E90 as this defines the folder structure that Maploader looks for to write data?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Map loader / error loading catalog

    Hi there,
    i have a problem with the "map loader" and my Nokia 5800 XM.
    ... the map loader worked as i bought the phone some months ago. Everything worked fine. Today i had to do a reset. The map is still working, but i cant get the map loader to work.
    After the start of the program and sync with the 5800 XM im getting an errormsg (in german but im trying to translate).. "cannot load the catalog of the 5800 xm"
    Thats it. I googled whole day, but found no solution... so this forum is my last help right now.
    It worked (today) before i have done the reset so im thinking that its not my OS (Windows7 64bit).
    thx in advance
    Murt

    one more thing.. i have updated the FW today to the newest available. 50.0.005
    found also another thread here /t5/Maps-Navigation-and-GPS/Map-Loader-error-while-loading-catalogue/td-p/624895/page/2
    might be an FW problem then?

  • Nokia Map Loader Error in connection

    Hi Guys,
    I have an N80 and have the MAPS software installed on my phone and the Nokia Map Loader software on my Laptop. However, in order for me to download the maps I have to connect my N80 to my laptop in Data Transfer Mode and then run Nokia Map Loader. This should then allow me to download the Maps. I get an error when connecting to my laptop in Data Transfer Mode. It just says Invalid usb connection or something like that. No I don't think it is the maps software but I would like to know if any of you had the same problem before and how it can be resolved. I sent a note to Nokia Tech team to see if they know but it takes a while for them to get back to you.
    So, does anybody know how I can get past this or get the MAPS downloaded?
    Any advice would be greatly appreciated.
    Cheers

    can´t connect nokia map loader, error, won´t work?
    I had this same problem, found your post looking for an answer (lol), and I just SOLVED the problem ; )
    First, you don´t connect in data transfer mode. You must use pc suite mode, or it won´t work.
    Second, (and this is the tricky part), YOU HAVE TO INSTALL nokia maps on your smartphone (so far ok, we all know this), but then you have to RUN THE PROGRAM ONCE.
    Don´t ask me why, but if you just install nokia maps, then try to connect with nokia map loader, it won´t work. You have to install the program then run it once. Exit the program, then connect to you pc (nokia map loader) with pc suite mode.
    BTW, do NOT install nokia maps on your smartphone on the phone memory. ALWAYS USE THE CARD MEMORY, install nokia maps on your memory card, because the maps are so huge. Most phones won´t have enough internal space.
    So this is it, no more suffering. Damn, I´m good ; )
    Message Edited by unsterblich on 17-Jan-2009 03:54 PM

  • The dreaded map loader error

    Hi,
    I've just gotten a new N95 8GB and am trying to download some maps to my phone. I have run the maps application on the phone and successfully connected the phone via USB in data transfer mode. The problem is I am getting the following error:
    "An unexpected error occurred. Try again. Sorry for the inconvenience."
    I've searched everywhere for a solution but without any luck. Sompe people reported proxy/firewall issues but I am running from a home connection and even moved my PC coonected to my phone into the DMZ without luck.
    Has anyone been able to solve this problem or should I give up and keep what is left of my hair on my head?
    grantonstar

    I've been trying to get the maps via Nokia Map Loader 1.2.1. I just installed .net framework 3.0 and reinstalled with no luck either.
    I've been using it with my home wifi connection but I want to be able to download a whole country so the map data is there for when I go out. Unless there is a way to pre-get a region or country direct from the phone?

  • N82 map loader error...PLZ HELP!!!

      I' have a problem with my map loader and I hope someone can help me. When I try to open map loader on my PC it gives me an error saying:
    '' unhandled exception has occured in a component in yr application. If u click continue the application will ignore his error error and attempt to continue.
      Font 'Tahoma' does not support style 'Regular' ''
    What I supposed to do? How can I change that font thing? Please help...
    thank you....

    Hi theog
    In "Add or Remove Programs" do you have "Microsoft .NET Framework 2.0" or later?
    Do you see "Tahoma" listed under the Fonts folder which is under the WINDOWS folder?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Can't install photoshop cs6 on brand new iMac - "Media db error: 18"

    At my company we recently hired a web designer – given his insistence on using the Adobe software, we decided to give Photoshop a try.
    We downloaded a trial version and tried to install it on the brand new iMac (no previous installations of adobe stuff) we just bought for the new desigher, but... it's not even installing!
    The installation process halts at around 2% and an error screen appears which gives generic instructions ("restart your computer and retry") and points to a log file where one can read "Media db error: 18".
    Of course we tried restarting the computer, cleaning up ~/Library, re-downloading the installer... no good – we then downloaded and run an adobe cleanup utility... still no good.
    Some people on the internet report they have the same problem... we found several questions on the matter, but no answer (besides "restart your computer" and other generic stuff that we tried and does not work).
    We then called Adobe support (Italian support) and they told us they don't give support for trial versions, like we should sight unseen buy a (pricey!) software we can't even install! .
    Can anyone here help?

    Thanks for your help!
    No, no beta or previous installations of any Adobe products – we are trying to install to a brand new iMac (just bought last week from the store): it has the latest version of everything (Os: Lion 10.7.4)
    Is there any debug switch I can turn on on the installer to get further information on what's going wrong? ("media db error" is a somewhat laconic error message)

  • Map Loader error while loading catalogue

    XM 5800, latest firmware, Maps 3 installed and working OK. I get "Error while loading catalogue for Nokia 5800 XpressMusic" whenever I start Map Loader 3.
    Uninstalled/reinstalled Map Loader 3 several times.
    Tried suggested fixes of deleting qf and cities folder then running Maps to recreate file structure.
    Tried it on a Windows 7 PC with PC Suite and also a Vista PC with Ovi Suite. Same error message.
    I am left without the ability to download any maps except over the air as I go incurring data charges.
    So I may as well just use Google maps!
    I see in the discussion groups this issue comes up for many different Nokia phones occasionally but I have never seen a solution.
    Anyone?
    Solved!
    Go to Solution.

    Just when I thought Nokia Care technical support knew what they were doing!!!!
    About 4pm NZ time yesterday, after the Map Loader server had been working for about 3 to 4 hours and everything was fine. I got a call from Nokia tech support. I was on the other line so they left a message.
    "Sorry, its not going to work because map loader is not completely compatible with Windows 7"
    and my email support thread finally pointed me to a "Solution" discussion board entry detailing a fix for Maps 2. You had to download the latest version of Map Loader 2.02!!!!! That was really helpful considering we are on 3.03 and 3.0.28 respectively
    So it all stating to work again may have just been coincidence and nothing to do with our support calls! :-<
    Oh well at least its working. Now all I have to fix is the MTP USB Device driver failing.
    Cheers
    Brian

  • Map loader error!Help

    Hi,
    My phone is N95 8GB.
    I have an error when using the map loader.
    Below are my detail step.
    1.change to "Data transfer mode" , there are message occur "USB data transfer mode activated.Mass memory may not be used during this time." Is it correct?
    2.execute Map Loader (v1.2)
    there are message occur "An unexpected error occurred.Try again.Sorry for the inconvenient."
    Is any one know jow to resolve it???
    thanks a lot.

    07-Jan-2008 03:04 PM
    jamestw wrote:
    Hi,
    My phone is N95 8GB.
    I have an error when using the map loader.
    Below are my detail step.
    1.change to "Data transfer mode" , there are message occur "USB data transfer mode activated.Mass memory may not be used during this time." Is it correct?
    2.execute Map Loader (v1.2)
    there are message occur "An unexpected error occurred.Try again.Sorry for the inconvenient."
    Is any one know jow to resolve it???
    thanks a lot.
    Hello jamestw
    I can help you with the first question. I can say thats normal. I always get that message, but I have no problem with it.
    The other qestin might have to do with problems on the map server? Have you tried again? Try re-installing Map Loader!

  • Brand new iPhone 4 loaded with information

    I've just set up my new iPhone 4 and noticed that it has come loaded with 107 contacts all from the US and Japan, and all with @apple.com email addresses. There is also 253 songs in the iPod section and lots of photos in the gallery - is this standard ? There was nothing loaded on my iPhone 3 when I got it. The phone is brand new, and was wrapped in the box when I opened it. It just seems really strange !

    Yes I thought that but it does look brand new and came with all the right packaging etc in shrink wrap packaging - if so they've done a good job !

  • Brand New 8700g initial load

    Hi.  I have an 8700g that I rely on heavily.  I recently purchased 2 more new units for a terrific price.  My initial 8700g was under T-Mobile, which I subsequently unlocked and switched to AT&T.
    The new 8700g has a blank screen when it's powered up - whether my SIM is installed or not.
    I tried restoring my latest back to the new 8700g thinking that may load what is needed to do the initial load and make this a viable backup device.  After the restore, the screen is still a nice shade of blue without any data.
    Is there something I can via internet download to make this device a workable unit, or do I need to take it to the AT&T store for the initial load?
    Thank you, to all of you who can help me with this question.
    Dave

    I don't know what you mean by "initial load"?
    New devices come loaded with the OS. You should only need to pop in (or out and in) the battery to boot up.
    So is this a truly new device, purchased from a carrier? And you are certain that it boots up fully, but you get a totally blank blue screen... not black or white screen, with icon in the middle? Does the LED at the top right do anything?
    I agree, the 8700 is a great device, true workhorse.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • New 64GB playbook loading error

    Hello,
    I just bought this new 64GB playbook about 4 hours ago.. and I cannot get it to the Welcome page.
    It is stuck on the loading screen.. please help!
    I have tried rebooting it several times.

    Thank you all for your help!
    I forced update on it using desktop software, and I got past welcome page!

  • Brand New Imac 20": Kernel error on normal start up.

    I have a Imac G5 with bluetooth keyboard and mouse (just moved from pc to mac) . I took it out of the box and just after it ended the setup it said that had losted connection with the mouse and keyboard and froze, i had to rebot it and since then it starts up and after a little while crashes and give me the kernel error. I tried to reinstall the os and software but it keeps with the same problem (in the installation when it is using the second disk and its installing the bundled software, it shows the kernel sign).
    When i start up in safe mode the Imac acts just fine, the keyboard and mouse work just fine and the sistem doesnt crash or give me the kernel sign. All the software and internet connection works just fine. I only losse the sound, Isight (in normal mode it crashes with or without the Isight) and airport (all factory installed).
    Please help me, i moved from pc looking for peace of mind and it has been difficult with this problem.

    Hello Sandra:
    Since your Mac is so new, I suggest you call Applecare and have the people there help trouble shoot your problem. It could be a hardware problem also.
    You were right to switch. Macs are, for the most part, trouble free.
    Barry

  • Brand New iPhone 4 Accessory Error when not connected to Anything at all!

    I got my phone out the box and immediately began experience this message. "This accessory is not optimized for this iPhone" - "You may experience noise caused by cellular interference and a decrease in cellular signal strength" - It was not, and had never being attached to anything. I have reset and restored it to IOS4 (not synced).
    The message persists about once a minute, even if the phone is sleeping. It's too new to have lint trapped in it, even though I have checked the dock area for obstructions.

    Deodato wrote:
    Here what I actually figured out last night. If you have a faulty data cable it will interfere with the data flow causing this error to occur. Try swapping out your data cable for a new one. It worked for me, works like a charm.
    Harder to explain is why this also happens to me, with the iPhone 4 in a JBL speaker/dock. There is a next-to-zero chance that the dock connector in the JBL has somehow been damaged during the few days I've had the new iPhone as compared to the many days I used the 3GS. It is also hard for me to understand why this message just popped up today while the iPhone 4 was in the JBL dock, but did not pop up over the past several days while the iPhone 4 was in the same JBL dock.

  • Map Loader Error

    Hello,
    i'm trying to use Nokia MapLoader but everytime I start the application i get a the following error:
    "An unexpected error occurred. Try again. Sorry for the inconvenience."
    my phone model is Nokia N95
    please advise...

    its definitely a proxy thing
    I managed to connect with no problems at home - but found that the US map is over a gig! - as I'm on a 2mb connection at home, I thought I'd best use the 100g connection at work.....
    but when I try laucnh the maploader at work - I get the unexpected error.
    so last night I went home - fired up maploader.....but got the same error!
    but after uninstalling and re-installing maploader I finally got it to work..
    bit pants really as I had to leave my laptop on all night to download the US map.
    nil marks out of 10 to Nokia for being environmentally friendly! - its a data file - why not just bung it on an html page for everyone to download?

  • Brand new 2012 fully loaded iMac is slower then my two year old iMac when using Final Cut.

    Just got a new 2012 iMac with 32GB RAM 3.4 Ghz and 3TB Fusion Drive and 2GB Graphics card.
    Now Final Cut runs even slower than it does on my old, lesser iMac. What gives?
    How Do I optimize the speed in which the video files are played?
    I'm using Final Cut 7.
    Files are all 1080 Pro Res.
    All files are running off of my desktop (locally).
    I press play and it is delayed a second before playing on the timeline.
    I thought this fully loaded machine was to help me edit faster.
    Is the Fusion Drive doing something funny with the file access that causes a delay in playback?
    The problem is, the same issue happened when I put the files on an external FW800 G-Drive.
    Any advice would be awesome.
    Thanks Community!
    -Tedshots

    are you sure all your files...render files...scratch disk, etc were all pointed to the FW800 drive?
    are you trying to play the exact same files in the same manner and see the new imac slower or does it just "seem" slower. You could, for instance, be attempting to play a more compressed file on the new iMac or a higher resolutidon compressed file....we don't know any of that. Apple to Apples, as it were, the new machine will obviously outperform the other one and there are too many variables you haven't covered to be able to draw any real conclusions....tell us more about the specific kinds of files, timeline resolution, video res on both machines and in what way the new one is slower....

Maybe you are looking for