Brand new HP Printer cartridge ran out way too fast

I just bought a new HP 60 cartridge for my printer the all in one Deskjet 4480. I was printing out piano music that I have purchased online, and the ink ran out at 100 pages. I had it on fast draft, so if wouldn't use that much ink. The cartridge is completely empty now. When I look up the page yields it says for the black cartridge (which I was using) should yield 200 pages. How do I get a replacement cartridge or my money back? This is ridiculous.

Hi,
It says 200 pages and the best we can get is around 85% or 170 pages with 5% coverage. Please check your output, are they 5% covered or a bit more ? Please note: many music symbols will NEED more ink to print. Probably on average each page is covered 8.5% and 100 is the right number.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • My hp officejet 4622 wont register my brand new cyn ink cartridge

    Hello,
    I have installed a brand new cyn ink cartridge into my hp officejet 4622 printer. It does not work. A printout does not register any ink.

    Welcome to the HP Community @Lollycookejesso 
    I saw your post about how your new cyan ink cartridge is not working on your Officejet 4622 model. Please try the steps in the guide I posted for you below to hopefully get the ink flowing!
    If the ink will not print, call us directly to speak with HP's Technical Support about your printer options from there.
    Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 4610, 4620, De...
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HT6050 After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....

    After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll.  Is there a way to adjust this?

    In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll.  Is there a way to adjust this?  This is the way I scrolled for MIDI editing on Logic 9

    Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
    it's here where one can configure a mouse device.
    Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
    Have a nice day!

  • Brand new geniune Hp cartridges depleting with very few printings with Officejet 6600

    I just bought an Officejet p6600 last fall  and I hardly ever use it for printing.  Twice now I have been faced with depleted cartridges after having only printed a handful of pages.  These were black and white pages.
    These cartridges were NOT empty. In fact, I replaced the cartridges the last time, came back 2 months  or so, later ce ame back to use them just now and it says that the brand new black one is depleted. Why do you think this is happening with genuine  cartridges?  If this keeps happening I'm inclined to think I have a lemon and I will want to return it.932
    Black is and was Hp# 932
    Colored cartriges is and were Hp# 933
    Thanks for any assistance you can provide.

    Hello brookdancer,
    Welcome to the HP Forums.
    I see that you are having an issue with an Ink alert about depleted cartridges even though ink is still available in the cartridges.
    Please go through the following link that deals with An 'Ink Alert' or 'Low on Ink' Message Displays for HP Officejet Printers.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, : click here.
    Thanks for your time.  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Laserjet 2600xi new drivers prints garbage spits out blanks

    A friend called me about this problem and all I knew to do was to get the latest drivers and install them after removing all traces of old HP software. They're using an eMac with OS 10.4.11. The problem may have a simple solution. When they send a file to print, at first there is a page of 'garbage' printed followed by the printer just 'spitting out' blank sheets until they turn it off.
    Any ideas to try? It could be a corrupt spool folder I suppose but don't know where to look for the file.
    Thanks

    Thanks, Greg. You are right that the 2600xi is Photosmart rather than Laserjet. I was just passing on the info given me by the owner who is frankly clueless. He asked my advice because I'm somewhat more experienced. I don't know how the rpinter was added to the Print & Fax pref pane.
    As far as using the HP drivers I've gotten them to install new ones and had them look to see if the printer was recognized in the Printer Setup Utility.app. It was and that's the last time I talked to them. I may have to go and make a house call. Thanks for your information and advice. I'll get back with any update.

  • HT2499 I inserted a brand new DVD and it quit half way through and gave me the "skipping over damaged area" message.

    I got this laptop refurbished from Apple in July. It was originally released in October 2011. I have watched DVD's on it previously, but lately, in the past 3 weeks, it's been pooping up the "skipping over damaged area" message. I put in a brand new DVD and half way through, it did it again, and I can't get past it. Any thoughts on what the problem may be?

    You can just open Terminal (in Utilities) and run the rm command (make sure you type it exactly) and then reboot.  With /.AppleSetupDone gone the system will think it is the the second part of an installation, i.e., after it installs and reboots and starts the Setup Assistant.  You will see the Welcome and music all over again and then you can go through the setup prompts again, this time specifying a password.

  • Brand new iPad Mini Retina- dead out of box

    Just got a brand new ipad Mini retina and it won't turn on. Have tried all kind of reset button combos and nothing. Any suggestions or is it really dead? Have an appt at Apple Store in the morning, but would love to resolve it before then.

    It's possible that its battery is totally dead. Try plugging it in and let it sit for an hour or two and see if there are any signs of life. Even if it does come back, I would still keep that appointment and get it checked out because normally iPads have a charge when you unbox them.

  • HT201263 Daughter has a brand new ipod.  Locked herself out of it within an hour, not synched, no itunes, nothing.  How do I unlock it?  Please help!

    My daughter has a brand new ipod, she has put in a passcode but can't remember the proper sequence of numbers she chose.  It's brand new, less than an hour old, so it has not been synched to a computer or connected to itunes.  I've tried to restore it but no luck.  Please help!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Why is my New iPad 3rd generation run out of battery fast and it takes 10 hrs to be fully charge?

    Why is my New Ipad 3rd generation run out of battery so fast and it takes 10 hrs to fully charge

    How fast is "so fast."
    In my younger days, I was real fast but now I'm half-fast!

  • After effects looping way too fast

    Hello all,
         First, please be advised I am brand new to this so please bare with me while I'm getting my feet wet. I followed this tutorial on youtube Make A Cool Intro | After Effects & Photoshop Tutorial - YouTube and go through most of it pretty easily, however, I used a 10 second time line and the loop seems to cross every second instead of over the 10 second period. Now, I did notice that if I click anywhere along the time line, I seem to have either a 1 second or 2 second interval all the way from 0 to 9, and can't ever actually get to 10 on the time line, only as far as 9 with the highlighted area covering the space between 9 and 10. I believe that is why it's looping so fast, however, I have absolutely no idea how to extend the area the entire 10 seconds. Any assistance would be highly appreciated!
    RayD52

    Three items:
    First, if I understand the question correctly, hit the End key the CTI (aka timeline cursor) goes to the end of the comp.  Hit the e (for end) key to extend the comp workspace.  AE will RAM Preview as much of the timeline as there is RAM available.
    Ah, but we don't know how much RAM you have!  So you need to go here to learn the diagnositc info we need:
    FAQ: What information should I provide when asking a question on this forum?
    And third, YouTube tutorials can be iffy.  It's far better to lean AE from the AE Pros instead of some high school kid who can miss things, don't you think?  In which case, you go here:
    Getting started with After Effects (CS4, CS5, CS5.5,  CS6, & CC)

  • Movie gets sudden change in fps (running way too fast)?

    Hi
    I am currently trying to port a game that I wrote in as2 to use as3.
    Most of my code is divided into classes but my art and buttons are placed on the time line and divided into different scenes.
    Now getting access to these objects are no problem. I just wait for a render event and then I get their reference by using getChild from the root object.
    Now my problem is that when I change scenes the game suddenly speeds up and run really fast for some time and then goes back to normal.
    My first experience with this problem was when I added a skip button to my  game intro.
    since I didn’t stop it but simply chanced scene it went on playing in the ”background” as I could still hear the sounds from it.
    now when I entered the new scene every animation ran twice as fast or even faster and it stopped once my intro  finished in the "background" or wherever it was . I solved the problem by simply stopping all animations before changing scene and thought that was the solution, but I soon discovered that, that didn’t work at some places.
    When I had made the menu scene working and started moving between some other scenes without animations but with lots of movie clips the problem reappeared.
    I tried to track my problem down to some move clips  and I sort of did find some that I could remove to solve my problem but these clips only contained one frame and had text in em so there was no animations to stop. Also the speedup got pretty random, sometimes I got lucky and the speedup didn’t happen but most of the times they did.
    Now my question is why are these speedups happening, and how do I prevent them?
    I have been thought about copying everything on each scene into a movieclip and then add and remove those clips to stage, and when I change scenes I just swap em, but there has to be a better way to solve this problem right ?

    are you using setInterval() anywhere?  runaway intervals are the most common cause of anything occuring too rapidly.

  • HP 5514 not printing with brand new black ink cartridge

    Ok so I have the same issue as everyone else here - new cartridges but won't print - specifically black. Other colors print fine. Cartridges have expiration of 2016 and were made in China. I put a new one in last night - got 2 pages printed out and all was good, color printed, black printed. Woke up this morning and no black - nothing, nada, zilch. I did everything recommended - multiple passes on cleaning, checked vent holes, etc etc etc...have now lost most of my color ink from printing the test pages - still no black. 
    So my unit of course is out of warranty - so now what? Like the others - product was not overly used - a few pages a week - nothing massive. So it should still have life left you would think.
    Next steps please? Really can't afford a new printer no matter how cheap they are these days...and with no warranty - what are my available options????
    Thanks - btw I worked for HP for a number of years in a small division if that gets me any brownie points....

    Hi @LAnn15,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print in black ink.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • New Printer4630 Print Cartridge error

    During my first setup after purchase I am getting an error message on the Printer Screen which is keeping me from completing my online setup.
    error  message - Ink Cartridge Problem - The following ink cartridge(s) must be replaced. --end of error message.
    I have removed and replaced the new cartridges several time but the error message continues to display.
    I have unplugged and replaced the power cord for a restart with no improvement.
    This question was solved.
    View Solution.

    Thanks for your information, I found online support services after posting my message. Ginny talked me through this same procedure you linked to. We decided the cartridge was faulty and HP sent me a new one which worked and allowed me to complete my setup.
    Steve

  • Brand new ipad wont turn on out of box

    I bought a new ipad 16 gig from bestbuy tonight and when I opened it up, it will not power on. Connected it to usb and computer wont recognize it. tried charging with the wall charger and usb cord for about 10-25 min and nothing came on the screen, no red battery etc... Anyone have any other tips before I return the unit as defective?
    Message was edited by: hunted98

    May as well try a hard reset: press & hold both the Home (round one at bottom center of the screen) and the Sleep (small button on the top of the case) buttons for 10+ seconds. If successful, you'll see the white Apple logo appear in the screen and the boot process will continue. If not, time to head back to the Geek Squad.

Maybe you are looking for