Brand new iMac won't boot :-(

Hi All,
I just got a brand new iMac. I did a clean install of Leopard, imported a couple of CDs into iTunes, and then thought I'd give Bootcamp a go.
I created the disk and the machine duly rebooted into Windows setup. As the installer couldn't see the Bootcamp partition (I was using XP without SP2). I told the installer to quit and reboot.
Now all I get is a hanging white screen when I power up my iMac. If i hold down the Alt key I get a mouse pointer which locks up after a couple of seconds and that's it.
I've tried:
- Holding down alt on bootup - this brings up a pointer which locks after about 2 seconds
- Holding down alt+C - with Leopard in the drive - nothing happens
- Zapping the PVRAM - AltCMD+PR" - this had no effect
- Resetting the SMU - hold down power whilst plugging in - now all the fans are running at maximum speed
- An open firmware update as per this post:
http://discussions.apple.com/thread.jspa?messageID=5984118
Is the machine completely toast?

The same thing happened to me this last week. After talking to Apple on the phone for hours they decided that it was dead and declared it doa (even though it was working for a few hours before boot camp). I am getting my new one this week. I can promise you that boot camp will not be put used on this one.
-Billy

Similar Messages

My brand new iMac won't boot up...

I've used my iMac about 10 times since June, and I'm having problems boting it up... when i switch it on, it cycles forever. Not sure what to do ??

I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Let us know if these procedures don't solve the problems.
Hope this helps

Brand new iMac will not boot, just make's funny "bonk" sound.

I have a brand new iMac (Intel, 20-inch flat panel). Just out of the box. Ran through set-up wizard. Used firewire to transfer files from an old CRT iMac. All was good for about an hour.
Tried to empty the trash. Finder says Trash was emptied, but, if I open the Trash, the 50-odd files I just deleted are still visible! If I try to select one, its icon immediately disappears. Hmmm....
I decide it's time to restart.
Upon restart, computer will not boot.
I push the power button. I hear the startup chime as usual. Screen lights up gray. But no apple logo on the screen. There is a long pause. Screen remains gray. Computer then starts making a soft "bonk" sound every 4-5 seconds. (Kind of hard to describe the sound, just imagine clipping the very first fraction of a second of the normal Mac startup chime, and repeating it every couple seconds.) This continues indefinitely.
If someone has experienced this, or has advice, please let me know your thoughts. Feeling rather bummed. Thanks in advance!!!
iMac Intel 20-inch 2.16 GHz Mac OS X (10.4.8)

Boot from the Install Disk 1
I cannot boot at all (see my post above). The
machine just sits there with a blank gray screen.
I appreciate the article link, though. I've already
read it and it will make a great reference for the
future, provided I can get back to a place where this
iMac actually runs.
Since you're new to Macs, I'm sure you don't realize that while your iMac is sitting there with only a gray screen, you can insert/push in "Install Disc 1" - and it will be accepted. Then press and hold down the power button until iMac shuts down. After waiting a few seconds until everything has settled, press power button and immediately upon hearing the usual Mac startup tone/chime/chord hold down the "c" key until you see the spinning progress indicator below the Apple logo. It will boot to the DVD, you will be able to use (from the Utilties pull-down menu) Disk Utility to "repair" the hard drive directory, then you will be able to quit the installation process, choose Startup Disk from that same Utilities pull-down, and restart your iMac:)

Please HELP!! Brand New iMac- Won't turn on!!!!!

Someone please help!!
I JUST purchased a brand new iMac today, no more than 4 hours ago! I brought it home and followed the set up instructions and pressed the "power" button.
The fan comes on- it sounds weak to me, then it slows down, the little white light at the botton right hand side comes on, but the screen remains BLACK!!! Nothing comes on my screen!!
I am NEW to Apple, so I am CLUELESS as to why this is happening or what is going on- not to mention EXTREMELY AGGRAVATED that I cannot find any tech support AT ALL- not on the phone, not on chat, not anywhere!!! I have waited almost 2 yrs to purchase a new computer- I chose an iMac, and this is the crap I get.
Please help!!!!
iMac 17inch Mac OS X (10.4.4) New

Dawn,
Having suffered my share of 'difficult' products, I can understand your frustration. This is compounded by the financial restraint you exhibited for 2 years of saving. Your experience should not just be good, it should be exceptional.
There may be something wrong with your machine. The white light is on when the machine is booting or the display is sleeping. The light will softly flash on and off while the machine is sleeping.
The fan should be as quiet as possible, to the point of being a low rumble/whisper or not even heard. It sounds like your computer is stuck in a startup mode.
Calling Apple will get this issue resolved to your satisfaction in a timely manner. If you state the issues they should be more than helpful. You can try a few things for now.
Press and hold the power button on your machine for a while and see if it reboots.
If you look on this page:
http://docs.info.apple.com/article.html?artnum=303124
You will notice the instructions for zapping the pram (keys held down when you press the power button and held continuously) : Press Option-Command-P-R until you hear two beeps (release)
Try that next. Your machine should be restarting when you toggle the power button.
Another quick thing you may want to try is shutting down the machine, unplugging everything (every cable including the power cable), waiting about 2 minutes, then plugging in just the keyboard and mouse and starting the machine with the power button.
Good Luck,
-j

My brand new iMac won't start up now and I've only had it 3 weeks...

my brand new iMac has worked for 3 weeks, then all of the sudden won't start. It shows the apple icon and the spinning wheel but never gets past that screen. We already formatted our old iMac to sell it so I really need to recover this. Any ideas on how to get it to get past this screen? I already tried safe mode but it went to this apple logo and spinning wheel icon after the bar

2nd. This is a warranty issue.
You realize this is a forum of other comsumers right?
Grant

Migration Assistant crashed new iMac, won't boot

I bought a new i3 iMac and skipped the migration assistant initially. Things were going fantastic, I imported and built a new iTunes library, iPhoto library etc.
It is running 10.6.6.
Then last night I decided to use Migration Assistant to move things from old Intel MacBook (running 10.5.8). As the migration was going to be something like 20-30 GiG's, I unchecked everything except Applications, and a few select folders from each user account (Documents, Desktop, Pictures, Movies). Since one account had the same name as the account on my new iMac, I asked Migration Assistant to rename the old account. I then went to sleep.
When I woke up, iMac screen was black and would not wake up from sleep. Old MacBook tells me that the connection was dropped.
I had to depress power button to force shutoff. Upon restart, at the apple boot logo, all I get is a message saying the computer has to be restarted, which appears in multiple languages. There seems to be nothing I can do to get it to boot.
Help?

elvenkind wrote:
I bought a new i3 iMac and skipped the migration assistant initially. Things were going fantastic, I imported and built a new iTunes library, iPhoto library etc.
Hi, and welcome to the forums.
That's likely a complication. You'll now have an extra user account with that stuff in it, and the account(s) you transfer won't have permission to it.
I had to depress power button to force shutoff. Upon restart, at the apple boot logo, all I get is a message saying the computer has to be restarted, which appears in multiple languages. There seems to be nothing I can do to get it to boot.
That's a *kernel panic.*
They are usually caused by hardware problems, but can be software.
Try running this: [Apple Hardware Test: iMac (Mid 2007) and later models|http://support.apple.com/kb/HT1883]. Run the Extended tests.
and the (free) Rember, a heavy-duty memory tester, from: http://www.kelleycomputing.net/
If that doesn't help, start with this Apple article: [If “You need to restart your computer” appears|http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html].
Once you get it started, check the transferred user accounts; most likely, the transfer was incomplete, and you'll have to delete the partial accounts and run the Migration again.
If your Apps were only partially transferred, just select them again -- Migration Assistant will just skip any that already exist on the new Mac. The only problem you might have is if it was in the middle of transferring an app when it failed; in that case you may have a partial copy of the app.

My brand new iMac won't connect to the internet - the Air is fine?

Hi All,
Loved my Air so much I bought an Imac today to do some serious work - but it won't connect to the internet. It won't load any external webpages, the wireless symbol in the menu bar is at full strength and in settings it says its connected to the modem. Its also finally recognising local time. It can also 'see' my Macbook Air in the 'Migration Assistant' but doesn't connect. The Air can't find the Imac in the 'migration assistant' and just spins. I've rebooted the modem, turned both on and off, checked Safari settings eg extensions (none loaded - its new today).
Essentially I've not been able to view a webpage with the new Imac at all - very frustrating and disappointing. (The Air was a breeze to set up).
I'm not very technical so does anyone have any suggestions? Or do I just return it? TIA.

You have 90 days of free AppleCare telephone support. Please give them a call right away, you can find the number by clicking AppleCare Contact Info

Brand new imac won't turn on.

I decided to swtich from PC to apple. My new imac arrived today. I was so excited. I took it out of the box, plugged it and turned it on. I heard the Mac chime and then within seconds it sounded like I was in an airport. The fan was so loud I was in shock. No picture every came on the computer, it remained black. So, I turned it off, checked the cable. I then turned it on again. The same thing happened, the mac chime, then the extremley loud fan noise and a dark screen with nothing. I am so mad and sad I'm trying not cry. I thought apples were reliable and such great computers. I just gave Apple $2700 and I got a big lemon.
Any suggestions?

Contact Apple's Express Lane and ask for a replacement. Not knowing where you reside or where you bought the machine, see this for contact information.

Brand new imac won't start HELP!!

Just got an iMac, fresh out of the box I hit the power button, everything looks normal, OS X does its normal checks, then the desktop comes up with multicolour stripes - the desktop is cluttered with all kinds of files - a darwin console opens up then an application called Phoenix starts does a few things that were too quick and then just says PAUSED in an orange box at the top and nothing else.
I have a bluetooth mouse and keyboard so I can't actually control the thing in any way either.
It also looks like OS X 10.5 has not been pre-installed.
Please can someone help me with a suggestions as to what I can do.
(I am an experienced Mac User having used them since the original SE - I've never experienced something like this before)
Thanks

it sounds like the iBook went to sleep during the transfer or at least it's hard drive spun down.
what you need to know is hope that simply booting from your install DVD will let you repair the iMac's hard drive. You could also try booting holding down the Command S keys on startup and when you get to the Single User Mode command line prompt follow the directions there for running fsck to repair your hard drive.
Do you have a FW hard drive? Can you copy files from iBook to FW and then from there to iMac?
And, it is always nice to have a FW emergency/backup hard drive. The iMac needs a different partition scheme to be bootable from FW than the iBook does, but you can create the proper partition type etc from a Tiger Installer and put OS X on FireWire, then see if you can backup and repair your iMac's hard drive.
MicroMat's TechTool Pro 4.5.1 is now shipping and is compatible, Universal Binary and bootable. Always good to have some 3rd party utility handy.
If you are just starting out, you probably don't have much if anything installed yet, so you may want to just erase your iMac drive and restore to what it was. That would be the easiest if Disk Utility won't repair it.
Instead of powering off the iBook, I would have tried to force quit whatever was running, like Migration Assistant.

Brand New iMac Won't Turn On - What To Expect From Support?

Hello,
I've been wanting to purchase an iMac for about a year now. Unfortunately I'm destitute, so puchasing this was a huge deal. I finally absolutely had to order it after using a PowerBook for two weeks that I have to plug an ancient monitor into, and recently I've had to use the track pad, inverted, as the one USB port fried and I have to position the laptop a certain way because of how I run the cables.
Anyway... today felt like Christmas. Such a beautiful computer. I installed World of Warcraft, ripped a few CDs onto iTunes and then randomly, "fzzt." I knew it was bad... it sounded like something "blew" and, sure enough, it won't shut on.
I've tried everything possible and I'm pretty sure it's the motherboard or power supply. I'm obviously incredibly upset, but to soothe myself until I can call phone support in the morning I'm wondering... what should I expect with this experience? I purchased through Amazon, but I'm assuming that doesn't matter. Will I get a new computer since this was obviously a lemon, or will they refurb mine? Will they retain my HD? How long does this usually take? I need this for work, which is most worrying. Kind of feel like crying. Is it okay to cry, and how hard? Do I have to send my pretty little mouse and keyboard back, too?

Hi I am a totally new mac user myself, how did the WoW install go, Im swithcing from a PC to an Imac? and I have been playing WoW since vanilla, so Im quite apprehensive about the change.
Should I expect the same problems, my Mac's are being delivered next week some time?

Brand new iMac 27 2011 won't boot after Lion upgrade

Got a brand new iMac 27 2011 yesterday and did an update to 10.6.8 first before installing OSX Lion over it...
After restarting it just shows then the "prohibitive icon" on screen and shuts down after few seconds...
It won't even boot from an USB stick with the OSX Lion image on it...
Recovery partition works but can't do a reinstall from there....
So going back to 10.6.8 now...

Just so you know I purchased brand new imac in July and did the same upgrade as you. I just installed Lion but did not have any issues. Only one concern overall though, it slowed down my new imac a bit. Not sure if there are settings or not but Leopard was faster than this. AppStore, iTunes are eating lot of memory and CPU util goes up.

My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps are responding. Any ideas?

My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas? If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,, Thanks!

For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
For other Disk repair remedies see
http://support.apple.com/kb/TS1417
Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.)

HELP! brand new iMac froze during firewire transfer and won't start!!!

During my setup for my brand new iMac I follwed the directions and connected my iBook via firewire to transfer my files. I noticed after a while that my iMac was frozen on "45 minutes remaining" and the blue line wasn't wavering a bit, and after over half an hour it hadn't moved. I powered off the iBook, and still nothing happened to the iMac screen--it remained frozen. I went to the guidebook and nothing seemed to work, so I powered off and on again, only to get a flashing question mark. All this and I just bought the darn thing tonight!
Help! Anyone know what happened and more importantly how to fix it?
Thanks.
Lindsay

it sounds like the iBook went to sleep during the transfer or at least it's hard drive spun down.
what you need to know is hope that simply booting from your install DVD will let you repair the iMac's hard drive. You could also try booting holding down the Command S keys on startup and when you get to the Single User Mode command line prompt follow the directions there for running fsck to repair your hard drive.
Do you have a FW hard drive? Can you copy files from iBook to FW and then from there to iMac?
And, it is always nice to have a FW emergency/backup hard drive. The iMac needs a different partition scheme to be bootable from FW than the iBook does, but you can create the proper partition type etc from a Tiger Installer and put OS X on FireWire, then see if you can backup and repair your iMac's hard drive.
MicroMat's TechTool Pro 4.5.1 is now shipping and is compatible, Universal Binary and bootable. Always good to have some 3rd party utility handy.
If you are just starting out, you probably don't have much if anything installed yet, so you may want to just erase your iMac drive and restore to what it was. That would be the easiest if Disk Utility won't repair it.
Instead of powering off the iBook, I would have tried to force quit whatever was running, like Migration Assistant.

I have a brand new iMac that does not have iDVD. Made a move on iMovie installed a 3rd party burn prog. but DVD won't playback on my regular dvd player. Need to burn one that will. Help!

My new iMac did not come with iDVD as they are not using iDVD any longer. I made a movie that I needed to put on a DVD that would play on any external DVD player. After calling Apple twice, they recommened a 3rd party program so I downloaded "Burn-osx" and made the DVD; however when i insert it into my player connected to the TV it gives the message "disk error --playback feature may not be available on this disk". Ok--now what? I am up against a time line here--need the DVD for a graduation party! Help! What am I not doing correctly?

I have a brand new iMac
If you are still within your 15 day return period. Call Apple they will sent out iDVD at no charge. (There are no realistic substitutes.)
Nicely explain that you may return the computer without iDVD. That usually does the trick. You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
408-996-1010
800-692-7753
If that doesn't work you can purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
they recommened a 3rd party program so I downloaded "Burn-osx"
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, and others. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie. Get iDVD.

IMAC won't boot with USB card reader attached

My quite new 24" iMAC won't boot if I have a USB card reader attached:
I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
Anyone have any ideas?
Regards,
Strathglass
Message was edited by: strathglass

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

Brand new iMac won't boot :-(

Similar Messages

Maybe you are looking for