Brand new IPad 3 out of the box - set up problem with Apple ID

Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

Similar Messages

  • Brand New iphone5 out of the box... speaker phone not working

    Hi Guys, frustrated & disappointed very much.. brand new iphone5 out of the box, speaker seems to be not working, i checked the volume, silent mode is off.. still no sound from the speaker.. no ringtones, no music via speaker.. however, with headset, sound seems fine..
    please help me out here...
    Regards,
    Anand

    Auto-focus requires adequate lighting and a subject with adequate contrast.  It may not focus in a very dark room, for example... or a night scene.  It also needs contrast -- for exmaple if you point the camera up into a blue, cloudless sky it wont be able to focus on that either because there's nothing of contrast (the sky looks the same overall "blue" whether in focus or out of focus so moving the focus makes no difference and this confuses the camera.) If, however, you have good lighting (e.g. suppose you're outside on a bright sunny day) then the camera should focus on any normal subject then it should have no difficulty focusing (as long as it isn't a completely plain, featureless subject that offers no contrast.) The camera actually has TWO different focus systems.  If you look through the veiwfinder then the camera uses it's "phase detect" auto-focus system (this is the fastest focus system.)  If you put the camera into "live view" mode so that you use the rear LCD to compose your subject then the camera uses it's "contrast detect" auto-focus system. If neither system works with the lens in auto-focus mode then the most likely cause is a problem with the lens (either the camera is unable to communicate with the lens or the auto-focus motor isn't working, etc.)  It's far more often that this is a lens problem and not a camera problem. If you happen to have another lens, try switching lenses to see if that makes a difference. Are the camera and lens both new?   

  • New ipad out of the box will not boot up?

    I have a new iPad2 new out of the box and will not boot up.  It is fully charged and when I touch the sleep/wake botton a usb cable appears with an itunes icon in the center.  Nothing happens when I touch the screen.  Any thoughts?

    Connect it to a computer with iTunes installed.

  • Any email address you could suggest to report a damaged brand new iPhone out of the box

    I am looking for an email address that I could report an iphone damaged came right out of the box

    Look all you want.  Apple does not offer email support.  go here instead
    https://getsupport.apple.com/GetproductgroupList.action

  • Out of the Box   Aperture 2    Problem with viewer

    I loaded Aperture 2 and was getting familiar with the settings. I was following along with the small book that came with the software. I was only as far as Chapter 2 moving between the browser and viewer and checking out the metadata. The viewer went to a white blank screen. The full screen option works fine and the browser is also working properly. I thought that maybe I hit a hide key but I couldn't find any reference in Help pertaining to a hide key for the viewer. Any advice is welcomed.
    Larry

    I'm having the same problem. I wasn't doing anything special when it broke. I can't get the viewer to come back though. I just get a white pane where it's supposed to be. Fullscreen works fine.
    The browser still displays images, but only every third row. Reinstallation might fix it. I'll try that.

  • Is there any list for out of the box portlets that come with portal installation.

    Is there any list for out of the box portlets that come with portal installation?
    Ramesh

    Yes - it's in the online help, on the Learning About Your Portal : About Portlets page. Here is the content:
    Portlets Created Upon Install
    The following portlets (and their necessary portlet Web services and Remote Servers) are created when you install the portal:
    Folder Expertise:This portlet displays the list of folders for which the user is an expert. It is added to the User Profile page by default.
    General Information:This portlet displays the default Profile Page. It is added to the User Profile page default.
    Managed Communities:This portlet displays the list of communities managed by the user. It is added to the User Profile page by default.
    Portal Login:This portlet allows users to log in to the portal. You probably want to add this to the guest user's home page so that users can log in from the default page displayed when they navigate to your portal.
    Portal Search:This portlet allows users to search your portal and access their saved searches. Users might want to add this to their home page for easy access to their saved searches.
    The following portlet templates (and any necessary portlet web Services and Remote Servers) are created when you install the portal:
    Community Links:This template is used by the portal to create portlets that display the links saved in a Community Knowledge Directory folder. To learn more about Community Links Portlets, see Community Links Portlets.
    Content Snapshot:This template is used by the portal to create portlets that display the results of a Snapshot Query.
    You can also install the following functionality as part of the Optional Enterprise Web Components:
    [url[/url]Stored Content:This portlet template allows you to create portlets that display stored content that is periodically refreshed. You might use this type of portlet to display content that is resource-intensive or takes a long time to generate. To learn more about Stored Content portlets, see Stored Content Portlets.
    [url[/url]XML Source:This portlet template allows you to create portlets that can collect XML content from an external source and display it in the portal as HTML. To learn more about XML Source portlets, see XML Source Portlets.

  • Malware on New Helix (out of the box) / Need Help Accessing Recovery Partition

    Hi,
    I'm working on a problem for my folks.  My dad got my mom a brand spanking new Helix (not exactly a cheap laptop).  
    It came with two pieces of malware:
    1.  Windows 8
    2.  AstroMenda
    Since I can't do anything about #1 and #2 is a serious PITA and the machine is new out of the box (really), I thought I'd just restore the machine from the recovery partition.
    However, I cannot seem to get the machine to boot to recovery mode.
    Enter doesn't seem to do anything (that is the only keystroke suggested by the splash screen).
    F12 gets me a boot menu but I don't see any recovery options.  Selecting the Windows Boot Manager or the Hard Drive itself results in Windows 8 booting.
    F1 gets me the BIOS.  Though I imagine I might be able to set the recovery partition (which #?) to the #1 boot option, I absolutely should not have to do that.
    Shift doesn't do anything (suggested elsewhere on these forums).
    F2 doesn't do anything.
    F11 doesn't do anything.
    Esc doesn't do anything.
    My older lenovo T61p had the ThinkVantage.  I always thought that was pretty goofy but now I'm wishing I had a ThinkVantage.
    BTW, Lenovo Support was USELESS.  They told me to return the machine and transferred me to returns but since my folks were on vacation when it arrived, we are outside the 30 day window, returns wouldn't do an exchange.  They opened a case with Customer Advocacy (never heard of that) but told me I wouldn't hear anything for 3-5 business days and there is no number, website, or email you can call to check your "Customer Advocacy" claim.  That sounds a lot like GFY.

    Hello.
    Open up the Charms Bar - Settings - Click the Power Icon - Hold either Shift button down and press Restart. This will open up the Advanced Startup menu.
    Cheers!
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Will Apple replace my brand new iPad 2 if the home button doesn't work?

    I recently got a brand new iPad 2 and as soon as I opened up and set it up I realized the home button didn''t work. However, sometimes the home button will start working and within minutes will stop again. I know this isn't normal for a brand new device.
    My iPad is still in warranty, so I'm wondering if I take it to the genius bar will they replace it?

    yes that's what happened to my ipod touch and they replaced it

  • Won a brand new iPad 2 on the radio in the US, can I trade in for the New iPad??

    I won a brand new iPad 2 on a local radio station here in southern California.  When I get the call to pick it up, will apple allow me to upgrade it to the New iPad? My son won one too about 10 months ago, so I know it's sealed in the regular retail packaging.

    To get the highest trade-in value, you're probably better off selling it yourself, but I am pretty sure the Apple store will accept it as a trade-in, esp. if you haven't opened the package yet. Other electronics stores might also do a trade in for you too. The best way to find out is to call the stores in your area to ask.

  • Can I trade in a Brand New iPad 2 for the New iPad?

    I have had the iPad 2 since late July 2011 in Australia. Since then it has had some problems, one major one recently was the screen near the Home Button starting to peel off.
    I took it in to the apple shop and the next day i picked but a brand new iPad 2, and have restored all my old stuff on it.. and now i am wondering if i can swap this for the new iPad?
    Thanks

    Apple don't do trade-ins - all they do is allow returns if you bought it from them within the past 14 days. If you want the new model then will probably get more for your current one by selling it privately and then buying the new one, and not looking for a store that does trade-ins.

  • Webcam and microsphone does not work on my new hp out of the box?

    Just bought from Best Buy? HP - 17.3" Pavilion Laptop - 4GB Memory - 320GB Hard Drive - Pewter
    When I turn on the webcam it says it is not enabled
    when I connect through skyp, it is says mic is not enabled.
    I verified them and they are enabled. This is just out of the box system.

    Hi hk33,
    Did you verify them in Device Manager?
    Once you have verified that they are enabled in the Device Manager go to Skype setup. 
    Setup the HP webcam as the video source for Skype. 
    Setup your microphone and sound for the notebook and then exit the setup.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I baught a 32g i pod touch. but it only has 28.6g out of the box. what's up with that?

    I baught a 32 GB ipod touch from best buy. I took it straigh out of the box and it only has 28.6 GB of available space. why is that. i baught a 32 gb not a 28gb! lol why do i only have 28.6 GB?

    christopherfrommanhattan wrote:
    I baught a 32 GB ipod touch from best buy. I took it straigh out of the box and it only has 28.6 GB of available space. why is that. i baught a 32 gb not a 28gb! lol why do i only have 28.6 GB?
    See Here...
    https://discussions.apple.com/message/12289884#12289884

  • Damaged iPad out of the box can't be exchanged. Help!

    Hi guys,
    Since the new iPad is not officially available in Serbia yet (and yet the new Retina Macbook pro is available) I bought it in Bulgaria. It is a Black 64gb 4g model. However when I brought it home and unpacked the box the upper half of the back of the iPad looked as if it had been sandpapered, it really looked bad. Morever the rubber between the glass and the bezel wasn't aligned properly, it just looked very bad! Trust me I am not nitpicking. The problem is that unlike most people who live in USA, UK, Germany etc. I can't go back to the store and have it exchanged, I can't even call Apple with my telephone because there is no Apple support in my country. I don't feel happy that I have given so much money for a device that looks worse than a used one, especially when I've been struggling to afford it. I am a language professor and I've been planning to use it in my lectures for keynote presentations, as a lesson planner etc.
    All the best,
    Vlasta

    Vlasta89 wrote:
    I did not examine the iPad because I've never had this problem before, because I trusted Apple's quality control.
    It may or may not have anything to do with Apple. The package could have been opened at the store (or anywhere) before it was sold.
    Go here -> https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • What's wrong with my iPad - out of the box?

    I happily received my new iPad. But unlike what I'm supposed to see on my start-up screen, I only get a picture of a USB cord pointed at an iTunes icon. It only stays on a few seconds before the screen goes blank. Additionally, although I have it charging, via its charger, into a regular outlet, the battery doesn't seem to be charging. (When I have it plugged in, there's a "socket" icon inside the battery icon, but when it's not plugged in - and I had it plugged in overnight - the battery had only white space inside it. I am a longtime Mac user, but this is frustrating. What can / should I do?

    [email protected] wrote:
    I happily received my new iPad. But unlike what I'm supposed to see on my start-up screen, I only get a picture of a USB cord pointed at an iTunes icon. It only stays on a few seconds before the screen goes blank.
    That definitely doesn't sound correct. Try plugging it in to your Mac and see if it will recognize it. Try holding down the sleep button to make it actually turn off. Then power it back on again. You will get an Apple logo during a power on. If you don't get that, it may be dead.
    Additionally, although I have it charging, via its charger, into a regular outlet, the battery doesn't seem to be charging. (When I have it plugged in, there's a "socket" icon inside the battery icon, but when it's not plugged in - and I had it plugged in overnight - the battery had only white space inside it.
    All of that sounds like normal behavior. That "socket" is the charging indicator. The white space is the battery full indicator.

  • I have been given a new ipad as a gift, we set it up with my ID and email etc.  It keeps defaulting to my wifes name.  Have checked my apple ID is all correct and entered what am I/we missing

    Trying to set up new ipad.  We had one in my wifes name that we both used.  We have set mine up with relevant apple id and emails but if i send mail it shows it is coming from my wife, completely confused.  Can any one help, have we set thing up wrongly????

    Hi Brodies Dad,
    It sounds like you have the settings in the email account on your iPad set up in error. If you go to Settings > Mail, Contacts, Calendars > Accounts > select your Mail account > then select the account email address to look at the details > Is your name set correctly here? You can edit the name in this location, as well as any other details.
    This article, about setting up an email account, takes you to the correct place to make changes as well.
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    Enjoy your new iPad!
    Best,
    Brett L

Maybe you are looking for