Brand new iPhone 6 will not turn on
Just out of the box, turned it on, set it up on wifi successfully, then plugged it in overnight. This morning it will not respond at all, does not power up. I am currently in Italy (it is an unlocked phone ordered from Apple US), so I cannot just head for the nearest Apple Store with it.
Hi, Donusko.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through for this issue.
iOS: Not responding or does not turn on
http://support.apple.com/HT201412
Cheers,
Jason H.
Similar Messages
-
Brand New iPhone 4 not turning on.
Basically the title says it all, I've plugged it into iTunes and it recognizes it as an iPhone but it makes a beeping sound every 5 seconds and still doesn't work.
Try forcing it into recovery mode, as described in this article. Make sure your iTunes is up to date 11.1.3
iOS: Unable to update or restore
I bought it from a 3rd party.
I see, just like a brand new 2010 Toyota with 60,000 miles on it.... -
My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?
Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
Good luck and do report back. -
My brand new PB will not charge when in standby or when on
I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?
Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e. it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered... -
My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..
iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed APPLE
im hoping that by holding both the power and circle buttons it will spring back to life ..........somtimes apple you are too clever with your secert hidden butttons switches
-
My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings
Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport -
I just subscribed to imatch while logged in to iTunes on a mac computer that belongs to someone else. (I was logged in to MY iTunes) my iPhone will not turn on the MATCH function, saying I am no subscribed. I've powered off and on. can anyone help?
Hi,
I am having the same problem. Itunes reports that it's uploaded all the music etc.
When I turn the match function on, it says "you are not currently subscribed to itunes match".
I have restarted the phone and coputer, logged in & out several times to no avail.
Any ideas or suggestions? -
IPhone will not turn on, charge or connect to a PC
My iPhone will not turn on, I was installing the iOS update on 4% battery which i've realised is bad and now my phone won't charge, turn on or even connect to a pc, i've tried pressing the two buttons to try fix it but nothing happens the screen remains black, ive tried charging it from a wall and nothing works at all! Is there anything else I can do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone will not turn on at all even when i do a hard restart. how can i fix this?
My iphone will not turn on at all. i tried to hard reboot it and still nothing what can i do to fix this?
Take it to your local Apple Store and have the genius take a look. If it won't respond at all, it sounds like a hardware failure.
-
New iphone will not sync w computer. Says computer not authorized for purchases. I have tried the following. Uninstall and reinstall iTunes. Authorize comp(already authorized). Backed up phone to computer. Please help
Hello Tyeary7,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Have a nice day,
Mario -
My iphone will not turn on. Why?
My iphone will not turn on. Why?? Help me please !!
Assuming that the battery isn't empty (and it can take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
-
What to do if your iphone will not turn on?
what to do if my iphone will not turn on?
charge it, then do a hard reset hold the home button +the power button for 20-30 seconds or intell you see a apple logo, after that it needs to be replaced
-
My iphone will not turn on. The only screen I can see is the charging screen. The phone does not seem to hold a charge
Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport -
My iphone will not turn on or charge? What is wrong with it?
My Iphone will not turn on and it doesnt show the battery charging, what is wrong with it?
Try doing a hard reset by holding down the Home Button and the Sleep/Wake Button. This should either get the iPhone started back up or show you a battery icon. If you see the battery icon, go ahead and charge for about 20 minutes and it should be up and running.
If neither of the two happens; you may need a replacement iPhone. -
My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?
If you have connected to other wi-fi successfully, then your wi-fi should be working. Try power cycling the router. Disconnect it from power for about 30 seconds and then restart it. After it has come back, try connecting again.
Maybe you are looking for
-
when using AIM instant messanger via the blackberry two questons 1. do messages get included in the text count each month? 2. on the bill in the breakdown are the messages broken down by time date ect per user like they are for phone calls and texts?
-
Macbook air 13 connecting to ethernet?
I am moving to University in a few weeks and my halls has no WiFi, just ethernet connection. I have recently bought a macbook air and I know I need an USB to Ethernet adapter, but Ive read bad reviews about apples one, saying that after a few months
-
Multiple projectors from my mac
is there a way to run 3 projectors off of one white macbook I want them to project onto 3 screens and I want the images to be the same on all three
-
Oracle Portal and access data from OID
I was trying to do the employee search on Portal. I need to enter firstname or lastname of an employee and click search button and it display employee details These are the steps I followed I created a database provider "Portal1" using the schema Por
-
EM 12c : How to add RAC monitoring
Hi, I have just installed EM 12c and I have a 2 node Oracle RAC running in my environment and I would like to add them to EM, I will be very grateful if someone please let me have the steps to do it in the best possible way or direct me to the existi