Brand new IPOD - ANOTHER LANGUAGE help
just bought my 30GB ipod today...hooked it up to my computer and the "do not disconnect" is in german. any help?
iPod: Changing the display language
Similar Messages
-
Just got my brand new ipod touch please help
I just go my 3rd generation ipod touch and when I try to turn it on there is a usb and a itunes cd with a music note on it please help.
Welcome to the discussions.
It sounds like [this is the screen|http://support.apple.com/kb/TS1275] you are seeing. I think that will help guide you through what to do. -
My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
and
try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
TS1286 None of these articals are helping me, why isn't my computer fiding mi brand new IPOD?
None of these articals are helping me, why isn't my computer finding my
brand new IPOD?Did you try here:
iOS: Device not recognized in iTunes for Windows
Does the computer have iTunes 10.7 or later?
Does the iPod charge?
Some 5G iPods were shipped with defective Lightning cables.
Try on another computer to help determine if you have an iPod, cable or computer problem. -
my daughter has a brand new ipod touch - latest one - she started to input a passcode then didn't finish the process then turned off ipod. she turned it back on and it is asking for a passcode - she doesn't remember what she typed. Ipod is now disabled for one hour. Can we override the disable. How do we reset passcode when we don't klnow the original. It has never been synced to Itunes. I am completely lost.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New. -
Brand new ipod touch suddenly stopped working. please help!
I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped. I even connected it back to my mac book but nothing happened. please help! i've only had it for two days!
That sounds like a mechanical problem. You might want to insert and remove the headphone plug several times and see if it fixed the issue. If it does not, call Apple. 800-275-2273 in the U.S.A. and I think Canada.
-
Brand new ipod touch closes down computer every time i plug it in Help
Can anyone help? I have a brand new ipod touch which closes down my computer everytime i plug it in. I have updated i tunes and we have 3 older ipods on the computer already in there own sites for the kids. I am not a computer wizz and getting frustrated on what to do.
Pretty much anyone using an iPod Classic with iTunes 9 or 901 is screwed in a similar manner. Read around these threads and you'll see man. Sorry, no word from Apple yet on what's going on.
Looks like their ''upgrade" to version 9 may actually be damaging hardware, as hard as that seems to believe. -
As I've said, brand new iPod touch. I only synced it Friday night, put some music on it. This morning tried to connect to iTunes and got a message saying the pairing record was missing? Computer isn't recognising it either, but it charges off the computer just fine. Have tried everything including changing USB port, rebooting, uninstalling and reinstalling iTunes twice, literally everything I've found on forums. Anyone help me out here? I'm so annoyed I could nearly cry.
Anyone able to help with this?
-
I have a brand new ipod touch 32gb ipod touch. Upgraded to ios 7. open music app but there is no radio tab to select!!! All online help just says, "just select it".
I have looked at the "More" part but again radio is not an option.
Can you help?Just wait a bit. Turn it off, then back on.
I don't know why, but after the update it doesn't show up right away.
When it finally does, you will find a red icon on the bottom of the screen, on the left side. -
Have a brand new ipod touch and the screen is completely unresponsive. I cannot swipe the screen to configure it at all. I have pressed the home button and on/off button to reset it but it does not have any effect. Please could someone help.
- Restore the iPod from backup
- If still problem restore to factory settings/new iPod
- Last, male an appointment at the Genius Bar of an Apple store. you have a hardware problem. -
My brand new ipod touch 5h generation doesnt charge and doesn´t turn on!!!! Help!!!!
I just purchase a brand new ipod touch 5th generation, and it doesn´t charge and doesn´t turn on etheir. Has I sad, is a brand new ipod that a bought at a dutty free. What can I do?
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My daughter has a brand new ipod, she has put in a passcode but can't remember the proper sequence of numbers she chose. It's brand new, less than an hour old, so it has not been synched to a computer or connected to itunes. I've tried to restore it but no luck. Please help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Brand New Ipod, Need Help QUICK!
its a brand new ipod, i wanted to update it, and it froze, it is stuck on the "Do Not Disconnect" screen, the only way i get it off this screen is if i actually disconnect... than when i reconnect it just does the same thing, and no, it does not have the loading thingey on the top left...
PLEASE HELP ME! my parents are going to kill me!
Ipod Nano 1gb White Windows XP BRAND NEWi have the same problem, i just got this ipod for my bday and everytime i plug it into the usb cable thingy it just says do not disconnect and it never transfers the songs, it just says that how do i get the songs onto it? when i put it in the thing that says the ipod is inserted never comes up(?) Somebody please help!
windows xp Windows XP -
Brand new ipod 7th gen wont syn or turn on, please help!
Just tried to syn my brand new ipod nano 7th generation but have encountered problems that I'm certain should not be happened as this has never happened to me before now.
Firstly, it said that I had to update itunes, which I did.
Then, registered my ipod but it wouldnt sync and everytime I tried plugging it in an icon flashed up that said it was corrupted. This was followed by another window telling me to update my ipod. Clicked on it and a strange white screen came up on the ipod screen that said ok to disconnect with a tick (but not how it usually looks) I have tried resetting it several times by holding down the "sleep" button and then the screen just went black - not the apple logo to say that it was resetting or anything.
Now it wont turn on or register when I plug it into itunes...
Anyone got any suggestions or solutions? ThanksWhats ur warrenty on it?
Just go return it for a new one if its brand new and they will give u a new one. Thats the easiest solution as far as Im concerned -
I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?
Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.
Maybe you are looking for
-
How to parse a text file and produce a dynamic shell script for linking?
I have some mapping files, one example is like this one; $ cat CON_xfrm_contract_to_20080302.map (object mfile_c_type (path "file:OBSOLETE") (fs "file://amanos/s01/abinitio/data/prod/mfs/mfs_16way") (local_paths 16 "file://amanos/s01/abinitio/data/
-
How to adjust volume of Airport Express speakers on Apple TV?
Hello, I've just setup my Apple TV (bought in November 2012). The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great. While watching Youtube videos or listening iTunes music, I can't find h
-
How to save input values in a dialog?
Hi there, I've got the following dialog with an EditText in it: var win, form; form = "dialog { \ orientation: 'column', \ alignChildren: ['fill','top'], \ preferredSize: [305, 300], \ text: 'Form', \ margins: 15, \ in
-
Intenisty graph Z scale marker values not working
Hello , I have a VI that plots Intensity graph, I have assigned certain RGB values to the Z-scale markers. But all I see is green intensity chart always. Below I have attached the Block diagram and front panel. Please advice where can I go
-
Does anyone know of any good books for iFS? Stuart