Brand new ipod does nothing
I just got a new ipod--it is 1st generation, but it was unopened. i have a macbook pro. i opened up the nano and immediately connected it to my computer with the same usb connector that i use for my 60gb video ipod. the ipod logo showed up for a lititle bit, but the ipod wasnt showing up on itunes, so i reset it. now, when i try plugging it in nothing happens. the screen is blank and it wont restart at all. ive tried both usb ports on my macbook pro. ive tried reinstalling software (which i didnt think was necessay to have in the first place since i alread use an ipod on this computer). so can anyone help me out?
I just got a new ipod--it is 1st generation, but it
was unopened. i have a macbook pro. i opened up the
nano and immediately connected it to my computer with
the same usb connector that i use for my 60gb video
ipod. the ipod logo showed up for a lititle bit, but
the ipod wasnt showing up on itunes, so i reset it.
now, when i try plugging it in nothing happens. the
screen is blank and it wont restart at all. ive
tried both usb ports on my macbook pro. ive tried
reinstalling software (which i didnt think was
necessay to have in the first place since i alread
use an ipod on this computer). so can anyone help
me out?
Leave it plugged in for an hour so to get a charge in its battery. It may be less reticent to work after that...
Similar Messages
-
new ipod nano, charged and used twice and now won't turn on, won't charge or do anything. I've tried resetting and updating, but nothing works. I've even tried buying a separate docking station and nothing. HELP!!!!
ipod nano Windows XPWelcome to Apple Discussions!
See this...
Your iPod Does Not Turn On
btabz -
New iPOd Does nothing when Pllugged in
I Just BOught a new 30 GB White 5th Generation iPod and i plugged it into my computer and nothing happened i tried the other computers in my house and when plugged in nothing happened. The iPod isnt recognized in any way. Any way i can fix this?
Have you read "I don't see my iPod on my Windows desktop computer or in iTunes"?
http://docs.info.apple.com/article.html?artnum=61711
Have you installed the latest iPod updater/iTunes/Quicktime?
Are you connected to a high powered USB port?
Have you tried the 5 R's?
Make sure those are all "yes". -
Brand new ipod touch does not work
Brand new ipod does not work will not sync or power up.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
As the title says, this is a brand new iPod touch bought from a store, I plugged it in a commenced the "setting up" process through iTunes on may iMac. It got to the stage where it said allow this computer to access the device (or something along those lines), i clicked yes, and then a message came up "to allow access, please respond on your iPod touch. however the ipod screen is black, and pressing the buttons doesn't work. How can i fix this? or do I need to return it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore. It never dropped or anything
Try here:
iPod touch: Hardware troubleshooting
You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
Try a restore to factory settings/new iPod if yuhave not doe so so far.
Are you using the headphones that came with the iPod? Are you inserting the plug fully
Have you tried another set of headphones in the iPod?
The speaker is not that loud. -
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
Brand new ipod touch connected, device recognized, but nothing happens?
I bought a brand new iPod touch 2nd gen two days ago and as I was very excited to plug it into my computer, sadly, nothing happened. iTunes recognizes the device and can be seen under Devices, but NOTHING happens and there are no other functions to click on at all. No set up, just a blank white screen, and yet, the iTouch screen still says to connect it to iTunes which it already is....
I have reinstalled iTunes, restarted my computer many times, updated it to the latest iTunes version, and still this problem persists. Can anyone help me out please!
Thanks in advance.I would start with these:
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1495 -
i am trying to download a movie onto my brand new ipod that has nothing on it. it is a 8gb ipod and the movie is 3.4 gb. halfway through it tells me there is no more space to download the movie. how do i fix this?
Go to the Store tab in iTunes and click on the Check For Available Downloads.
-
My daughter has a brand new ipod, she has put in a passcode but can't remember the proper sequence of numbers she chose. It's brand new, less than an hour old, so it has not been synched to a computer or connected to itunes. I've tried to restore it but no luck. Please help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
just bought a brand new ipod nano and downloaded an audiobook borrowed from the local library. The book is there and playing but, I cannot hear anything. What am I doing wrong?
Does the same file play normally in iTunes? Do other audiobooks play normally on the iPod?
How does "borrowing" work? Does it require use of another app, other than iTunes, to get it on the iPod? -
my brand new ipod shuffle does not play in my honda city car - says old version. what should i do?
Make sure the FM radio is stopped and Bluetooth is turned off.
-
I bought a brand-new ipod on ebay,does it have warranty?
I bought a brand-new ipod touch on ebay. does it have 1-year warranty ?
You can check it with this.. https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
My brand new ipod wont start up. tried connecting to my computer, still nothing. has never been started up. whats wrong with it?
The battery may need charging. Or just take it back for a replacement.
-
My brand new Ipod Nano is not being recognised on itunes and i cannot download music onto it.
\i changed to the new itunes and now there is nothing on the screen other than the music ie no options.
help please!Try a different cable. And are you connecting directly to your computer or through a USB hub?
Maybe you are looking for
-
Error while uploading the PAR file of Production to UAT-
Hi Experts, Could you please help me out in resolving the error which i'm facing while uploading the PAR file. 1. I have downloaded the par file from the production, imported to my NWDS. 2. Made changes to my HeadiView.jsp 3. I want to test my imple
-
Error in Simple Input Form Example for CE 7.1?
Hi @, I am trying to execute Simple Input form example in sdn for CE 7.1. But its not working as per the functionality. Can anyone suggest what is the issue ? Regards,
-
Scom monitoring non domain computers
hello experts i have scom 2012 and want to monitor non domain computers (servers in dmz) i have created new template in ca server then create new certificates for dmz server and scom rms server. now i have connection between two servers but there is
-
Application using JVM with IE embedded within it using its own JVM
I am developing on an application that uses JVM to run. Within this application an IE browser is being called. Subsequently IE browser is trying to run an applet which is trying to open another jvm. It appears the version of Java I am using does not
-
Setting a Custom "401 Unauthorized" Page
When our claims based SharePoint web application cannot authenticate users (for whatever reason, e.g cannot get a Kerberos ticket), they are presented with a blank white page with the text "401 Unauthorized". How and where can I can customise this pa