Brand new Ipod touch 1g freezing up

I received a new ipod touch today because my old one had a bad ear jack. well i restored the new ipod from my old ipod back up. and every app i click on or song i play the ipod freezes up. i have restored it back to its original factory state and it still does it. I play Imob online and i can not even get passed the home screen anymore. it just freezes. This happens with other apps too. The only way i can get out of the freeze is to push and hold down the menu return button. what should i do to fix this?

Contact Apple ASAP and see if they can organise another replacement.
If a restore didn't work then it could indicate problems with the actual hardware, which can't be fixed by the user.

Similar Messages

  • Brand new ipod touch 3 frustrating slow wifi

    Dear all, I just opened my brand new iPod Touch 3 yesterday and it connected to my wifi network without any issue.
    But then, the browsing has been a joke. Not a funny one. It is slow like you have no idea. I could load only 4 pages in the whole evening. The google front was one of them.
    I was sitting right next to the router. It didn't help.
    I cannot say I was loosing the connection. Only that loading any page was next to impossible.
    My provider of internet is www.get.no in Norway.

    Update: I previously advised the following quoted manual set up. I thought had solved problem but it returned. I now have found I think the real root of slow iTouch on Airport Wifi Network. Seems wireless telephone is interfering on 2.4 freq. Channel for 2.4 Freq was set on 1. I have now changed to channel 6. I have now being operating Two iTouch at same time for several hours with no freeze and acceptable speed. Anyone else having hang ups, slow operation, etc. would suggest trying channel change on 2.4 Freq., especially if you have wireless tel. in house.
    Brad
    Quote of Maculu manual set up
    You open Airport Utility, click on manual setup, enter your WiFi password, click on wireless tab, click on radio mode drop down box, pick 802.11a/n-802.11b/g instead of automatic, Now click radio channel selection and pick manual, pick any random channel for each of the 2 frequencies.

  • Charging for software on a BRAND NEW iPod Touch?

    Glad to hear people are now getting the 2.2 download to work. Has anyone gotten anywhere asking Apple for justification for a $10 software upgrade on a brand new iTouch purchased within 30 days and given as a Christmas gift? (I gave 2!) This is even crazier than "Microsoft think".
    There was another post comparing this to an upgrade from Windows XP to Vista - NOT SO. You would know a PC's OS in advance and you could weigh the cost of the PC PLUS an OS upgrade against whatever features you might miss by not having the latest OS. If you bought a PC back during the pre-Vista release you either received a coupon for an OS upgrade when Vista came out or you knew that the PC came with XP and you were OK with it. There was no disclosure of any kind when I was researching or purchasing the Touch.
    So, I ask again, does anyone have any words from Apple justifying this charge for their brand new iPod Touch? We're not talking about units purchased months ago, just BRAND NEW devices that are effectively 4 days old for the gift recipients.

    Your iPods may be 'new' as opposed to 'used', but they were clearly not the latest models.
    Any iPod that do not have the 2.2 software installed have to pay for it. This is because that the time they were manufactured by Apple and released the 2.2 software was not available. Apple sold those devices to the retailer before the 2.2 software was released and therefore you bought an 'old' model that is NOT entitled to the 2.2 software. It is not about when the device was sold it is about when it was manufactured. Apple do not know when the devices you have were sold to you anyway.
    Apple does know the serial numbers of your devices and it does check to see if they are entitled to the update and clearly they are not as they were manufactured before the new software was released.
    These are user support forums and are not manned by Apple. If you want Apple support then use the 90 day telephone support that came with your Apple product or the 12 month warranty which can be used in any Apple retail store.
    You have not been 'flamed' in these forums we are just giving you the truth.
    Just because you have a strange view or reality does not mean it is correct.

  • The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

    the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

    See the following to purchase earlier, compatible version for iOS 6
    App Store: Downloading Older Versions of Apps on iOS - Apple Club

  • Brand new ipod touch not working like it should??

    I have a brand new ipod touch that i got last tuesday.and every downloaded app will stop working after i have had it for about a day..like it starts to load the app then just goes back to homescreen..all pre-installed apps work fine.
    but i have tryed restoring my ipod and it doesnt really fix it because all the apps stop working just like before..and i have also tryed deleting and re-installing the apps but is still doing the same thing.
    Is there a way to fix this or should i get it replaced??
    (i have a 2 year warrenty)

    Maybe your using too much Virtual Memory. Try holding the sleep/wake button and the home button until you see the silver apple.

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • My brand-new iPod touch (5th Gen) battery takes a very long time to fully charge, even while not in use. Why is this and what should I do?

    Just recently bought a brand-new iPod touch, 5th generation. To be exact, got it two days ago, this past Saturday, on 12/13/2014. Initially, when I first turned it on, it had a fully charge and I didn't need to charge it. I also didn't see anything in the very small and limited start-up guide you receive with it to charge it for a certain amount of time before use, or to use it until the battery dies, then charge all the way, like a lot of electronic devices have you do when you first purchase them.
    So I was assuming I didn't need to do anything like that. First question, should I have charged it for a period of time before use? Should I have used it until the battery died, then plugged it in and charged it fully before use? Or is none of this necessary initially and iPod batteries are good to go from the start?
    Please excuse me if this is an obvious question, as this is my first ever iPod. Anyways,like I said, nothing in the "instructions" said anything about that, so I didn't do it, I just used it until it got below 20% battery left, then I plugged it in.
    Now for the battery itself, it takes literally a day or so to fully charge, even while not in use. Even if I use it for a while, turn off the iPod to make sure it shuts off all background data and apps, and then plug it in to charge, it still charges extremely slowly. I've never seen a device take this long to charge. As for the battery life itself, I'd say at full charge it lasts about 4-5 hrs, maybe 6, and then I have to charge it again. Meanwhile it takes around 24 hours, without me using it, to fully charge. If I use it while its charging, the battery decreases faster than it charges, and eventually I'll get the typical "20% battery remaining" message pop up.
    I know it is charging, as the lightning symbol is next to the battery symbol. Specifically, right now, I plugged it in about 1 hr 30 minutes ago, and it has barely gone up. Also, whenever I press the home button to check the battery, I can see it jump down from about 50% to somewhere around 25%-30%. What is that about?
    This is really frustrating, and I'm seriously contemplating either taking it back and trying my luck with a different iPod, or just taking it back and getting my money back. Any help and clarification on this matter would be greatly appreciated, and I'll answer any questions I can to shed more light on this.

    It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source like a computer's USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Itunes asks to update my brand new ipod touch.. I do and now it wont work at all!!!

    just got my brand new ipod touch ... working good then itunes wants to update so I do now my ipod doesnt work at all! all I get is the apple and a line on face and wont even turn off!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.

    I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.  It never dropped or anything 

    Try here:
    iPod touch: Hardware troubleshooting
    You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
    Try a restore to factory settings/new iPod if yuhave not doe so so far.
    Are you  using the headphones that came with the iPod? Are you inserting the plug fully
    Have you tried another set of headphones in the iPod?
    The speaker is not that loud.

  • HT1212 my daughter has a brand new ipod touch - never used - she entered a passcode then immediately forgot it and now she has tried to enter one too many times and ipod is locked for 1 hour - she has never synced with itunes HELP

    my daughter has a brand new ipod touch - latest one - she started to input a passcode then didn't finish the process then turned off ipod. she turned it back on and it is asking for a passcode - she doesn't remember what she typed. Ipod is now disabled for one hour. Can we override the disable. How do we reset passcode when we don't klnow the original. It has never been synced to Itunes. I am completely lost.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.

  • I have a brand new ipod touch and it wont connect to itunes or my computer!!??

    I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.

    Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
    I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
    Please have you any other suggestions???

  • Full automatic Itunes synchronization impossible for a brand new Ipod touch 5th generation

    Hey all,
    I bought a brand new Ipod Touch 5th generation which won't synchronize my whole music library through Itunes (very latest version of the app).
    The ipod runs IOS8 and the mac mini runs Yosemite latest version.
    I already had issue synchronizing music the very 1st day I had the Ipod touch. As a result, went back to the Apple store for changing it for another device, thinking the Ipod was faulty, which Apple accepted and changed my device for a brand new one.
    Since then, still unable to synchronize the full music library through itunes. I performed several full resets both on the mac mini and of the Ipod touch with no success. The synchronization seems to run fully normally with no warning pop up saying it failed or whatsoever and the sync process is very very long. But once done, my Ipod remains empty with no data at all.
    The weird thing is that Photos are fully synchronized with no issue at all.
    I contacted the Apple assistance who argued that my music library might be faulty and have corrupted files in it. So I cleaned it up, suppressing some files I had in double etc.
    BUT still, no success, I had to go through the entire library to sync manually, but even then, I was able to have on the device, only half of the library, i.e. around 25 go. once the ipod display 25 to 30 gb remaining, it won't sync no more files.
    Although I cleaned up the entire library and reset both devices hundreds of times, I have no clue why even manually, I'm completely unable to have my whole library automatically sync.
    I spent hours on the phone with Apple assistance to get some help with no success so far. I even re-installed Itunes completely, still without any result at all.
    I was only able to upload on the Ipod only half of the music library, and there are still 25 to 30 GB space remaining on the ipod and 20GB of music to be uploaded.
    The automatic sync process always fails any time I try to run it, except for the photos, books etc.
    I must say I also have an 160 GB Ipod classic with which I never had any problem so far, and which fully sync my whole library with no issue at all.
    I read on the internet that some other users of IOS8 are accountering the same issue with itunes.
    COULD SOMEBODY PLEASE HELP, I'M DESPERATE, given the price of the Ipod I really do regret I bought something that does not work properly. Quite disappointed

    Yes the system just keep sync as everything is normal, but then no song is actually uploaded to the ipod.
    And the remaining space bar shows the ipod's empty.
    the automated process will just keep sync as if normal and the last step saying 'applying the modifications" just keep going on and never ends.
    I was only able to upload manually half of the albums, all songs comes from different sources; ripped from CD for great part, but also downloaded from the internet from trusted websites.
    All songs play normally through Itunes on the Mac Mini.
    But then when trying to sync the whole library automatically, nothing happens and I only get tags of the different albums, as if there, but actually it won't play none and the Ipod player just keep skipping as if no musical data is there.

  • Brand new iPod Touch is not being recognized by my computer

    Hello,
    I just bought a brand new iPod Touch. I had iTunes installed since this is a replacement to a very old iPod. When I plugged my new iPod Touch to start the very first sync, iTunes crashed and started giving me a Windows 7 error (999). After many frustrated attempts to reinstall iTunes (and a few blue screens in between), I followed a recommendation in one of the postings to delete all the Apple programs in a certain order. It worked and I was able to reinstall iTunes. The problem now? My USB, which at one point kept asking for the software to install the iPod, won´t recognized it anymore. Period. I´ve rebooted several times and whenever I plug my iPod in any of the four USB ports, absoluletely nothing happens, as if nothing had ever been plugged in. I tested the USB with my blackberry and it recognized it. Please help!! Thanks!

    Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...

  • Brand new ipod touch will not sync?

    Bought a brand new ipod touch.  Tried to sync to iTunes on my computer.  Checked all music in library, clicked sync, ipod says it is syncing, computer says sync is complete, but there is no music on the ipod.  Have repeated process a dozen times.  Have tried automatic sync and manual sync.  Have disconnected, reconnected.  Have restarted both devices and tried again.  No error message, gigabytes show nearly nothing used up, on the computer and on the ipod, even after it says the sync was successful/is complete.  Argh, help!?

    Hi jen,
    When you say all of the Music is checked, do you mean checked in the library? When you hook up your iPod to the computer, you also have to make sure that the "Sync Music" box is checked on the Music tab for the Device Profile....
    Cheers,
    GB

  • Brand new ipod touch screen not working properly

    My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

    Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Maybe you are looking for

  • Is there better way to write SQl Insert Script

    I am running out of ideas while working on one scenario and thought you guys would be able to guide me in right way. So, the scenario is I have a Table table1 table1(fieldkey, DisplayName, type) fieldkey - pkey   This table have n number of rows. The

  • EnityInstance from an InferencingEvent

    hi, there is a statement in developer help: Example: Handle rulebase events with an inferencing event listener The ruleInferenced() method receives an InferencingEvent object through which various properties are available, including the EntityInstanc

  • Issue during PR creation

    The problem is the system automatically adds 0 (zero) digits behind the amount. For example, amount entered is 55 TWD. The system makes the amount 5,500 TWD - adding two zeros behind 55.

  • How to change payment terms in FV70

    Hi All, I am trying to post FV70 Customer invoice park but system defaultly picking paymnet terms from master data, i want to change payment terms in FV70 but it displaying in graed mode, How to chage payment tems thanks & regards mohiddin

  • ABAP query for PI

    Hi all, I created a ABAP query for physical inventory report. I used the table ISEG and i got the relevant output like material, diff value, batch,PI doc number. But i cant able to get the difference quantity posted. How to proceed Regards KK