Brand new ipod touch and it wont sync to my Itunes.

My Itunes doesn't says its connected or anything. I plugged the usb into the computer, my computer makes the noise saying the ipod is plugged in and I don't know how to fix it. help?

If you mean that the iPod does not appear in iTunes then:
If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Then try
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Similar Messages

  • I have a brand new ipod touch and it wont connect to itunes or my computer!!??

    I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.

    Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
    I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
    Please have you any other suggestions???

  • Brand new iPod Touch 4g won't sync music from iTunes?

    Every time I plug my iPod into my laptop to add more music I get an error saying iTunes cannot read the contents and I need to restore it. Last week I got a new white iPod Touch 8gb 4g. I had the same problem with my last iPod and when I bought the new one I was hoping I wouldn't anymore but I do. I've tried uninstalling and reinstalling iTunes, restarting my computer, hard rebooting my iPod, turning my iPod off and on, deleting old backups, etc. But still it won't sync correctly. Sometimes it will start the sync, but rush through all the steps without actually syncing anything. So I try to sync again and again to see if it will add anything but it just rushes through all the steps without doing anything. And eventually I get the message saying it cannot be read and needs to be restored. I'm using windows, and my iPod as well as iTunes are both up to date. And I have plenty of space left on my iPod. I've even checked for viruses/threats but there are none on my computer. Even to add one new song I have to restore first. Even though it's a brand new iPod. Any ideas why it won't sync or why iTunes cannot read the contents??? I've been having this problem for awhile. A couple months. With my old iPod and my new one.

    My understnding is that this may be a Windows related problem or sometimes USB problem.   I have the same issue and I know how to correct it, BUT ( and this is a BIG BUT) ... it will happen again and each time it does you will have to fully restore your I-Pod.  Here is my post: https://discussions.apple.com/message/18645554#18645554 discussing a potential one time fix, but the problem happens the next time you plug in the I-Pod Touch 4G.
    CitizenPete

  • I have a brand new Ipod touch and it will not sync.

    I have a brand new ipod touch and I cannot get it to synch with my itunes.  I have two other Ipod Nano's that will synch up just fine.  The computer has windows XP with the latest service pack on it.  It does not recognize it as a device in windows, but sees my other two ipods.  I have the latest itunes software on it.  I even uninstalled it and reinstalled per the apple web site.  I connected the ipod touch to another cpmputer and the usb port sees it as a device just fine.  What do I need to do to this thing to get this computer to see it?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    The iOS devices use differnt drivers than a Nano and other simple iPods

  • Just bought an ipod touch and it wont sync with itunes. Tried resetting sync history but doesnt work, plus when i try to access itunes preferences it freezes for ages and creates loads of distnoted.exe files?????

    Just bought an ipod touch and it wont sync with itunes. Tried resetting sync history but doesnt work, plus when i try to access itunes preferences it freezes for ages and creates loads of distnoted.exe files?????

    Just realised when reading other peoples problems that it is not actually letting me reset sync history???

  • My new ipod touch 4th gen wont show up on itunes nor in my computer

    my new ipod touch 4th gen wont show up on itunes nor in my computer

    http://support.apple.com/kb/TS1538

  • I have just recieved a brand new ipod touch 8GB, it wont turn on and it wont either charge or recognise connection through ITunes. I have tried the hold down home and the power button together but no luck. Its absolutely dead, any ideas please ????

    I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar    

  • My brand new ipod touch 4th gen wont let me sync new songs to it

    I just got my new ipod touch 4th gen 2 days ago and it wont let me sync any new songs to it and it wont let me take any songs off it either. Ive tried rebooting it and restoring it serveral times and nothing seems to work. Also I updates my itunes and still nothing. HELP

    What specific attributes (resolution, frame rate, bit-rate, audio forma etc.),do the mp4 videos have?  There are many variations in the mp4 format.  Have you tried using the Create iPod and iPhone version in the Advanced tab of iTunes?

  • Just got a new IPOD Touch and it wont connect to our Wifi home network with a Belken N Router. Our router uses WEP 64 bit security, but had a "blank" password field, which the IPOD did not like. Changing to a 6 char numeric PW didnt help either.

    OS is whatever OS ships with current IPOD Touch
    I cannot understand why the APPLE engineers have designed this product so that it has SO MANY WIFI problems.  This is supposed to be an easy-to-use product.  We've had no problems connecting our new laptop, our ROKU box, etc, but it seems impossible to get the IPOD touch to work.  NOTHING LIKE SPENDING XMAS MORNING DOING APPLE TECH SUPPORT TROUBLESHOOTING TO LEAVE YOU IN THE CHRISTMAS SPIRIT!!!  Argh!
    In fact, the only way we have been able to get this expensive brand new IPOD to work on our home network is to DISABLE SECURITY in the router settings.  THIS IS ANYTHING BUT A GOOD IDEA.
    DON"T KNOW WHY BUT MANY OTHER USERS ARE REPORTING THE SAME KIND OF PROBLEM SO APPLE ENGINEERING NEEDS TO GET BUSY AND FIX THIS PROBLEM SO THAT NEW USERS CAN CONNECT TO THE INTERNET WITHOUT HAVING TO BE TRAINED ROUTER ENGINEERS TO DO IT!!!!
    Ok, sorry for the rant, but surely those of you who are experiencing this share my frustration.  This is not why I bought an APPLE product.
    IS THERE ANY POSSIBILITY THAT APPLE WILL NOT ALLOW A WIFI PASSWORD with more than one identical alphanumeric character?  Any ideas?  We also tried eliminating the 40 MHZ setting under Bandwidth settings in the router settings for our router, but it made no difference.  The router has the latest firmware, too.  Running out of ideas, and am ready to box this unit up and send it back!

    Thanks, Bob!  You are correct.  And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE).  One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
    1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind.  Only with the Security Mode set to DISABLED, could we gain access.
    2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
    Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers.  Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
    I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
    In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

  • I just bought a new iPod touch, and when I sync it, it won't hold anything.

    I just bought a new iPod touch. But when I sync it with my iTunes library, it won't hold anything. It just says syncing, and when its done, there is nothing on it.

    Was the iPod previous synced to another iTunes library/computer?
    Did you initiallysetup the iPod via wifi?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? (iTunes purchases only)
    Backup to iTunes on this computer and restore from that backup
    iOS: Back up and restore your iOS device with iCloud or iTunes       

  • I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

    I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

    What happens when you try to connect?
    Error messages?
    Does the iPod see the network?
    Have you tried other networks?
    See:
    iOS: Troubleshooting Wi-Fi networks and connections

  • Brand new iPod touch and January update

    I need your help to make a decision on iPod touch purchase. If I buy iPod touch now, the day after Macworld, will I get new apps for free? I searched apple.com but haven't been able to find the answer. This is essential, because there's no iTunes store in my country and I won't be able to buy the apps. The only way to get them is download free update.
    Anyone has official information on that?

    I did see someone say that if you bought your touch in 2008, you can get the update.
    I don't know if it's true or not, but it may be worth a phone call to Apple to find out.
    Cheers!
    -Bryan

  • Brand New Ipod Touch and already issues

    Alright, before I begin, I'm running 32bit Windows Vista Home Premium on an AMD Dual Core 1.9ghz processor with 2gb ram, as well I've had an iPod Nano before getting this iPod Touch without any problems before hand.
    I've uninstalled iTunes and reinstalled with a clean download from the apple website of iTunes (To ensure new drivers, etc), I plug in my iPod Touch to let it charge and to connect to start transferring music. I start up iTunes, plug my iPod Touch, first thing I see on the screen of my iPod is an error from what I've researched before writing this post. A USB cord with an arrow pointing to the iTunes logo.
    First thing I do, I've already uninstalled/reinstalled iTunes, restarted my computer, and ensured that iTunes was up to date. Check, check, and check.
    I had also noticed while my iPod was plugged in, was that whenever I would try to connect it to iTunes, I would be presented with was : "This iPod cannot be used because the Apple mobile device service is not started."
    Thought to myself, that's odd. I went to Start > Control Panel > Administrative Tools > Services, located "Apple Mobile Device", and next to it was blank. No "Started", no "Stopped", nothing, just blank. I right clicked on the service and went to properties to check and see if it was set to start up, it was set to Automatic. I switch to Manual, tried to start it again but presented with "The Apple Mobile Device service started then stopped. Some services stop automatically if they are not in use by other services or programs", Switched it back to Automatic, same issue.
    Take into consideration, I have my avast! antivirus down. So I have no issues with antivirus/firewall going on right now.
    I have checked my drivers for the iPod under Device Manager, Apple Mobile Device has shown up and has been installed correctly, including "USBAAPL.SYS", was showing no problems installing.
    I sincerely do not know what to do beyond this point. I figure something is wrong with the Service, either that or iTunes is royally screwing something up. The error on the iPod I know means that it needs to restore itself with the help from iTunes, but iTunes is neglecting its presence (To my knowledge)

    not sure, but i think bonjour also has to be running. check it out.
    ah, under the startup type, are u saying that field is blank, rather than "manual", "automatic", "automatic (delayed start)" or "disabled"??
    Message was edited by: David.

  • Hi have brand new ipod touch and the screen has frozen with the apple icon and a blank recharge bar below it any ideas how to fix this please

    u there

    Have you tried resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Next connect it to your computer and try to restore the iPod via iTunes on your computer.

  • I have a new iPod touch. I've synced it through Itunes. None of my iTunes purchases show on my iPod now. Help....

    I've been trying to download some games to my son's iPod touch. I have several now in my iTunes library and have synced the iPod many times. They still do not show up on the iPod.Also, when I click on the purple iTunes app on the iPod it says that it cannot connect. I have no idea what to do!

    To fix the cant connect load up the iTunes Store or page that displays the error then go to settings > general > date and time
    Turn off automatic
    Set the time for a month into the future
    Go back to iTunes should work
    Switch auto back on and time will fix and store will continue to work
    About the syncing I really have no clue are you sure they are selected to sync under the device and apps.

Maybe you are looking for

  • OnLocation - can I change the codec?

    Hello, I am using OnLocation CS4 with a Canon XH A1s camera which records in HDV format on a MiniDV tape. I was able to record fromt eh camera to the Laptop and it looked great! I was wondering if there is any way I could record to a different codec

  • Resetting PRAM caused Keychain to stop working?!?

    I reset my PRAM few days back and now keychain doesn't store any passwords. Everytime I log onto an accounts it promts if I want to save and I click Yes. I tried deleting everything from it, created a new keychain group but still no luck. Also tried

  • MIRO Account Determination

    Hi Friends , How SAP determines the GLs need to be picked while posting MIRO document. Generally it picks Vendor and GR/IR & CVD Clearing and Custom Clg ( In case of Imports) & Cenvat Clg ( for Domestic Purchase) + Price difference and other account

  • Dump in CX_WD_CONTEXT

    Hi, In one of the standard webdynpro there is an enhancement where a popup window is displayed on clicking the Z button. The functionality is working fine in all system. In the upgraded system there is a dump coming when the Z button is clicked, ther

  • Windows 8.1 default logon prompt for smart card instead of username/password

    Hello, We are currently in our pre-deployment test phase for Windows 8.1 and are trying to knock out the high visibility problems that we notice.  One of the issues we've noticed: When logging into Windows, the default prompt is for a username/passwo