Brand new ipod-touch internal speaker suddenly stopped working all-together? Please help!

Just got my brand new, white Ipod- Touch and was surfing on youtube, watched a video and mid video the sound just vanished. now no sounds come from the internal speaker whatsoever, but headphones still work. I have tried restarting it as well as reseting, can anyone help me?! Thanks a lot!

That sounds like a mechanical problem.  You might want to insert and remove the headphone plug several times and see if it fixed the issue.  If it does not, call Apple.  800-275-2273 in the U.S.A. and I think Canada.

Similar Messages

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • TS1538 i cant get my new ipod touch 7 to be recognized in itunes? Please help!

    I cant my new Ipod Touch 7 to be recognized in Itunes?  Please help!  I'm trying to sync my music and book files with the new Ipod buts it not even listed under devices.  I have an old Ipod that I was using prior to this one that shows up under devices but not the new one.  Im only promted to transfer from what appears to be my old device?

    Alright, right after posting my question I figured it out. I plugged my iPod into one of the USB ports in the front of the MacPro and it worked like a charm. Now the problem is, what is wrong with the two ports in the back of my Apple Cinema HD screen? That I can't figure out clearly. The USB connection from it to the MacPro is connected.

  • IPod Touch: Internal Speaker doesn't work

    Hi,
    My iPod Touch was replaced ~6 months ago bec. the internal speaker was bad. This new one, though, the internal speaker doesn't work at all (except for the Clock/Alarm tones). The vol. button says "Headphones" on screen when you change the volume, whether or not the Headphones are plugged in. I've tried turning off and other things I've seen but no clear answer. Is there a fix for this?

    Have you tried restoring it?
    Can be a Hardware problem, go to the nearest Apple Store and see if they can fix it

  • Brand new ipod touch suddenly stopped working. please help!

    I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped. I even connected it back to my mac book but nothing happened. please help! i've only had it for two days!

    That sounds like a mechanical problem.  You might want to insert and remove the headphone plug several times and see if it fixed the issue.  If it does not, call Apple.  800-275-2273 in the U.S.A. and I think Canada.

  • Brand new ipod Touch (8GB) does not work with DHCP

    I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

    its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.

    I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.  It never dropped or anything 

    Try here:
    iPod touch: Hardware troubleshooting
    You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
    Try a restore to factory settings/new iPod if yuhave not doe so so far.
    Are you  using the headphones that came with the iPod? Are you inserting the plug fully
    Have you tried another set of headphones in the iPod?
    The speaker is not that loud.

  • How do i turn off the external speaker on my brand new iPod touch

    how do i turn off the external speaker on my brand new iPod touch - it is very annoying

    Just turn the volume fully down using the lower button on the upper left side of the iPod.
    You can also go to Settings>Sounds to turn off alert and ringer sounds.

  • Brand new ipod touch not working like it should??

    I have a brand new ipod touch that i got last tuesday.and every downloaded app will stop working after i have had it for about a day..like it starts to load the app then just goes back to homescreen..all pre-installed apps work fine.
    but i have tryed restoring my ipod and it doesnt really fix it because all the apps stop working just like before..and i have also tryed deleting and re-installing the apps but is still doing the same thing.
    Is there a way to fix this or should i get it replaced??
    (i have a 2 year warrenty)

    Maybe your using too much Virtual Memory. Try holding the sleep/wake button and the home button until you see the silver apple.

  • Brand new Ipod Touch can't been seen in Itunes

    Hi there,
    I hope someone can help as this is driving me mad!
    I have just received a brand new Ipod TOuch but when I connect it to my PC per the installation instructions I get the following message "Itunes could not connect to the Iphone because an invalid response was received from the device"
    I have uninstalled all Apple products from my PC and reinstalled most up to-date version of Itunes.
    I have tried different USB ports.
    I have stopped and re-started the "Apple mobile device" and "Ipod Service" services.
    I have done all of the above in various combinations and re-started my PC numerous times.
    None of this makes any difference.
    The Ipod does not appear in my "My Computer" but when go into device manager on "My Computer" it is listed there so it would appear that my PC can see the Ipod.
    I tried it on another laptop and a brand new installation of Itunes sees the Ipod fine, no problems.
    However I have previously used an Ipod Nano on this PC and this I think is what is causing the problems.
    I have listed below the content of the Itunes Diagnostics file in the hope that that will help. I see that it does mention the Ipod Nano previously used.
    iTunes Serial Number <Edited by: Host>
    Current user is an administrator.
    The current local date and time is 2009-06-07 10:05:26.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Radeon 9550 / X1050 Series
    ATI Radeon 9550 / X1050 Series Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.2.0.23 is currently running.
    iTunesHelper 8.2.0.23 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
    VIA USB Enhanced Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod nano running firmware version 1.3.1
    Serial Number: <Edited by: Host>
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Can anyone help me please?
    Many thanks.

    Okay, I had this same issue as soon as I updated to iTune 8.2. Someone gave me an idea about renaming a certain file, which I thought worked for a little bit. The issue came back and I am back in the same boat!
    The bad news is to find a version of iTune 8.1. Uninstall everything and then reinstall iTune 8.1. This has worked for some; however, some have even had to restore their iPod Touchs!
    I am giving in and doing this tonight. I waited as long as I could for the fix. My wife has an iPhone and we have NOT upgraded her iTunes to 8.2 because I have read iPhone users having a similar issue. If her iPhone died, then that would be ultimate deal breaker.

  • Brand new iPod touch restarts itself all the time

    Hello, my dad just came home from Japan, with a brand new iPod touch.
    I managed to register it in iTunes, but when i updated the firmware i got an error message. I tried again and i think that i succeed. Then i started to sync music and the rest of the stuff. The syncing stopped after a minute, and when i tried to navigate on my iPod i realised that the touch screen didn't respond. So after several attempts, i made a hard reset.
    But now, the iPod touch restarts itself. The Apple logo comes up, and then the screen turns off in a dramatical way, and then the Apple logo comes up again. If i hard reset my device again, the process continous.
    I sometimes the iPod shows the "charge battery" screen, and then I can charge the battery. BUT after 5 minutes, the iPod touch starts restarting itself again. :S
    Does anyone have a solution to this? Extremely strange.

    I suspect you have a hardware problem. Probably a non-functioning battery (over or under) and causing a hardware reset. Bring it to an Apple Store for replacement.
    iPhone / Touch / Shuffle (1st gen)

  • Charging for software on a BRAND NEW iPod Touch?

    Glad to hear people are now getting the 2.2 download to work. Has anyone gotten anywhere asking Apple for justification for a $10 software upgrade on a brand new iTouch purchased within 30 days and given as a Christmas gift? (I gave 2!) This is even crazier than "Microsoft think".
    There was another post comparing this to an upgrade from Windows XP to Vista - NOT SO. You would know a PC's OS in advance and you could weigh the cost of the PC PLUS an OS upgrade against whatever features you might miss by not having the latest OS. If you bought a PC back during the pre-Vista release you either received a coupon for an OS upgrade when Vista came out or you knew that the PC came with XP and you were OK with it. There was no disclosure of any kind when I was researching or purchasing the Touch.
    So, I ask again, does anyone have any words from Apple justifying this charge for their brand new iPod Touch? We're not talking about units purchased months ago, just BRAND NEW devices that are effectively 4 days old for the gift recipients.

    Your iPods may be 'new' as opposed to 'used', but they were clearly not the latest models.
    Any iPod that do not have the 2.2 software installed have to pay for it. This is because that the time they were manufactured by Apple and released the 2.2 software was not available. Apple sold those devices to the retailer before the 2.2 software was released and therefore you bought an 'old' model that is NOT entitled to the 2.2 software. It is not about when the device was sold it is about when it was manufactured. Apple do not know when the devices you have were sold to you anyway.
    Apple does know the serial numbers of your devices and it does check to see if they are entitled to the update and clearly they are not as they were manufactured before the new software was released.
    These are user support forums and are not manned by Apple. If you want Apple support then use the 90 day telephone support that came with your Apple product or the 12 month warranty which can be used in any Apple retail store.
    You have not been 'flamed' in these forums we are just giving you the truth.
    Just because you have a strange view or reality does not mean it is correct.

  • The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

    the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

    See the following to purchase earlier, compatible version for iOS 6
    App Store: Downloading Older Versions of Apps on iOS - Apple Club

  • My brand-new iPod touch (5th Gen) battery takes a very long time to fully charge, even while not in use. Why is this and what should I do?

    Just recently bought a brand-new iPod touch, 5th generation. To be exact, got it two days ago, this past Saturday, on 12/13/2014. Initially, when I first turned it on, it had a fully charge and I didn't need to charge it. I also didn't see anything in the very small and limited start-up guide you receive with it to charge it for a certain amount of time before use, or to use it until the battery dies, then charge all the way, like a lot of electronic devices have you do when you first purchase them.
    So I was assuming I didn't need to do anything like that. First question, should I have charged it for a period of time before use? Should I have used it until the battery died, then plugged it in and charged it fully before use? Or is none of this necessary initially and iPod batteries are good to go from the start?
    Please excuse me if this is an obvious question, as this is my first ever iPod. Anyways,like I said, nothing in the "instructions" said anything about that, so I didn't do it, I just used it until it got below 20% battery left, then I plugged it in.
    Now for the battery itself, it takes literally a day or so to fully charge, even while not in use. Even if I use it for a while, turn off the iPod to make sure it shuts off all background data and apps, and then plug it in to charge, it still charges extremely slowly. I've never seen a device take this long to charge. As for the battery life itself, I'd say at full charge it lasts about 4-5 hrs, maybe 6, and then I have to charge it again. Meanwhile it takes around 24 hours, without me using it, to fully charge. If I use it while its charging, the battery decreases faster than it charges, and eventually I'll get the typical "20% battery remaining" message pop up.
    I know it is charging, as the lightning symbol is next to the battery symbol. Specifically, right now, I plugged it in about 1 hr 30 minutes ago, and it has barely gone up. Also, whenever I press the home button to check the battery, I can see it jump down from about 50% to somewhere around 25%-30%. What is that about?
    This is really frustrating, and I'm seriously contemplating either taking it back and trying my luck with a different iPod, or just taking it back and getting my money back. Any help and clarification on this matter would be greatly appreciated, and I'll answer any questions I can to shed more light on this.

    It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source like a computer's USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Itunes asks to update my brand new ipod touch.. I do and now it wont work at all!!!

    just got my brand new ipod touch ... working good then itunes wants to update so I do now my ipod doesnt work at all! all I get is the apple and a line on face and wont even turn off!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • Open item upload - FI

    Hi, I want to upload all open items for vendor/customer and gl. Which BAPI should i use for these. Can i upload all open items in using one bapi or separate BAPIs are available for vendor/customer and gl. T-code are : FB01 or f-02. Please guide me in

  • N97 some widgets won't open

    I'm having some problems with certain widgets not opening. I click the icon in the menu and the widget starts to open but will soon shut down with no error message or anything. I tried to remove the widgets that are malfunctioning but the icons will

  • What does the trim() method of the String class do in special cases?

    Looking here ( String (Java Platform SE 7 ) ), I understand that the trim() method of the String class "returns a copy of the string, with leading and trailing whitespace omitted", but I don't understand what the last special case involving Unicode c

  • User-exit on APO side for the deliveries that are coming from R/3

    Hi, When a delivery is created in ECC for a VMI customer, it creates an EI order in APO. We need to record some details of these orders on the APO side.   Can you please let me know the user exit/BADI that gets triggered when a delivery comes to APO

  • Adobe Air and export to Excel from jasperserver

    Hello, I had issues to display PDF's from Adobe Air when using jasperserver. As soon as I intalled Reader 9.0 it worked fine..Now I am having an issue with excel and csv and rtf files... When I click from my air application's and generate a report an