Brand new MBP 13" screen not coming on

Hi,
I have just bought a MBP 13", and when i tried putting it on yesterday, the screen did not come on. It was a dead black screen. However, the keyboard lit up and the processor warmed up a little as well. Also, the speaker came on with the welcome music.
I have tried this several times but in vain.
Also, i fear that there may be a burning smell being emitted from the back of laptop, from where the warm air is dispensed.
I would be very grateful if someone could please help out with the above said issue.

Hey,
Thanks for the suggestion, but that still did not work out. I took it to a authorized local service center and they too were unable to help. However, I would like to know if it is possible to request for a replacement ? The only problem being that I purchased the laptop in the USA and am currently in India.

Similar Messages

  • Brand new ipod touch screen not working properly

    My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

    Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Why is my BRAND NEW touch smart screen not recognizing my touch?

    I can't figure out why when I purchased my HP touch smart screen computer, at the store on display, it was working, and now when I set it all up, it doesn't recognize my finger touch!

    If it doesn't even make a chirping noise when you touch the screen, it may be defective.

  • Aperture 3 not working on brand new MBP???

    Just tried to open Aperture 3 on my brand new MBP and I get this error message:
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
      Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
      Reason: no suitable image found.  Did find:
              /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    I downloaded A3 from the Mac Store, I've deleted it and re-installed and still get the same message. My MBP is running 10.6.8.
    Any ideas, hope you can help.
    Thanks!

    Hi, Thanks! The solution on the Macrumors forum worked! A plugin manager issue!
    I've copied the solution below for anyone else who may run into the issue.
    Turns out it's a simple fix.
    For those with the same problem:
    1. Navigate to: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    2. Delete the PluginManager
    3. Get a new copy of the PluginManager. (You can copy one from a friends macbook) or use the one hosted here: http://qvenon.com/files/PluginManager.zip
    Thanks again!
    best,
    upgrayedd1

  • My brand new MBP 13"got the error "there is not enough memory or disk space to convert this document". What gives? Help please!

    I am trying to use mail merge in Word for Mac on My brand new MBP 13". And I get the error "there is not enough memory or disk space to convert this document". What gives? Help please!

    Why do I get there is not enough memory...: Apple Support Communities
    Error message in MS Word opening a .docx file "There is not enough - Microsoft Community

  • Hey i bought a brand new MBP like 6 months ago and now it won't charge

    i bought a brand new MBP like 6 months ago and now it won't charge. I tried using a friends MBP charger of the same year as my computer but it still says not charging at the top right corner of the computer screen where the charging symbol is. This problem just happened out of nowhere because it was working the day before then the next day it just stopped working saying it is not charging. I tired doing all of the suggested techniques to fix it but not luck.
    This is the battery report is when my MBP is either connected to my charger or my friends charger which works perfectly on her computer.
    Battery Information:
      Model Information:
      Serial Number:          W013*****3BA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          201
      Hardware Revision:          000a
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          3137
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5751
      Health Information:
      Cycle Count:          126
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          11528
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0000
      Wattage (W):          0
      Revision:          0x0000
      Family:          0x0000
      Serial Number:          0x00000000
      Charging:          No
    As you can see where it is labeled "AC Charger information" it states that its connected but there is no Wattage and says its not charging .
    What is wrong with my mac? Is it serious and does Apple Care cover it?

    Have you done a SMC
    http://support.apple.com/kb/HT3964
    Items include
    Power
    The computer doesn't respond to the power button when pressed.
    A portable Mac doesn't appear to respond properly when you close or open the lid.
    The computer sleeps or shuts down unexpectedly.
    The battery does not appear to be charging properly.
    The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

  • Kernel Panic and a strange sound on a two days brand new MBP 17" i7

    I just got a brand new MBP 17" i7 two days ago. Already had two issues:
    1. On the first day while the computer was doing an automatic software update I heard a loud horn type sound coming from within the machine. After that the screen turned grey with the Apple logo and a status bar underneath. After that the machine returned to the "normal" screen and keep working.
    2. Yesterday while trying to set up a mighty mouse the computer gave me the kernel panic screen. I turned the computer off and then on again and everything seems fine.
    I contact Apple and they gave me two options for my peace of mind:
    1. Take the computer to an Apple Genius bar
    2. Send the machine back to the store
    I own an iMac and a Macbook and this things had never happened before. I don't think it's normal for a brand new computer to do things like that.
    This incidents took place within the first two day of receiving the computer, but maybe down the road or as I start installing programs like Final Cut Studio 3 or Office for Mac, things could complicate...
    What do you recommend?

    Hi there.
    The noise you heard and the status bar is usually the result of a firmware update being installed. Nothing to be concerned with and in fact will probably happen again if they just swap out the machine.
    The kernel panic may have just been a fluke but you could try running the Apple Hardware Diagnostics that actually shipped with the machine to rule out hardware. If the tests come back ok then you could try to just re-install the OS.
    Good luck.

  • Magic mouse lag on brand new MBP

    Hello,
    I received my MBP 15" (Mid 2012) several days ago. But my Magic Mouse doesn't work very well with it. The cursor lags every several minutes to one hour or two, and lasts for several seconds to several minutes every time. I don't mean that the movement is slow - when it happens, the cursor doesn't follow the movement of the mouse very well, it seems 'jittery'. The cursor may "jump" to the destination 0.3~1 second after I moving the mouse. I tried everything I can do but the problem is still not solved. Here are what I've tried:
    * Setting my router to 5ghz band
    * Turn the mouse off and on.
    * Turn the mouse off, replace the batteries to new ones, and turn on.
    * Restart the computer.
    * Remove the mouse from the list of Bluetooth devices, and pair again.
    * Reset PRAM and SMC.
    * Disable WIFI.
    * Unplug everything in my room that has a wireless receiver, including Xbox, Apple TV, etc, and remove the batteries of their controllers.
    None of the above works! However, I also have a Magic Trackpad which also uses Bluetooth but it works fine. I tested the Magic Mouse on my old MacBook Pro and it works without any problem. The distance between the mouse and the laptop is less than 2ft.
    Mouse still works fine on my old 2010 MBP.
    Brand new MBP 15", 256GB SSD, 8GB RAM.

    I had the same problem with my new Retina Macbook Pro and my Magic Mouse that worked fine on my previous 2010 Macbook Pro.  At work I don't have a wifi network so I share my ethernet connection via wifi so I can get internet on my iPhone and iPad during the day.  After reading this thread I tried turning off the internet sharing and it has cleared up all lag issues with the mouse.
    Just thought I'd share my fix.  Hopefully Apple can clear up whatever issues are causing this so I can get wifi back to my devices at work.

  • How much does OSX take up on a brand new MBP HD?

    Does anyone know on a Brand new MBP 128 SSD drive....how much is allocated to the OSX?
    Thanks in advance

    You do need to install Windows twice - once under Boot Camp and once under Parallels - but you can legally use the same CD with the same licence for both installations. There is no need to buy two copies.
    There is a program called Monolingual that will assist in removing the additional language support. Be care, as it has removed the components needed to run Rosetta for some users who were not as careful as they should have been.
    Parallels has to run from within OS X, but some people have had success running Windows off of an external drive. I have not tried it, but the instructions can be found HERE.

  • My brand new ipod Nano is not being reconised on itune.I changed to the new itunes and now there is nothing on the left hand side as before and it just has the music. Help!

    My brand new Ipod Nano is not being recognised on itunes and i cannot download music onto it.
    \i changed to the new itunes and now there is nothing on the screen other than the music ie no options.
    help please!

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • FaceTime problems on 3 brand new MBP 13 Retina, Apple has given in

    Hi All,
    After recieving 3 brand new machines (MBP13 Retina) in Dec 2013 and Jan 2014, Apple does not believe they can deliver a proper working brand new machine. They also won't look into the problem and hope i can accept this faulty machine.
    Is that what Apple is turned into? A company that doesn't believe they can fix their own machines? Or do they not care anymore about their customers and their product?
    The person I'm facetiming with cannot hear me when we talk at the same time. My (3 brand new, but all 3 faulty) machines will mute me, so the other party cannot hear me. It is back to the walky talky ages again, 'over'.
    Since I'm a great believer of Apple, I cannot believe they won't fix this problem and just keep on selling and delivering brand new MBP 13 Retina machines that don't work.
    Does nobody at the Apple company care anymore, is there no company pride?

    after a week of working on this problem the last straw was spending  3 hours being helped with this problem by 1mb.com after which time they asked me either to take out a years  support at £129 or pay for help from a better qualified technician! As I only received my IPad last week I am going to send it back tomorrow. why doesn't Apple respond when it is obvious from all the discussions that there is a problem? Considering the price of the iPad I feel thoroughly disillusioned and cheated as well as frustrated by spending so many hours to no avail. this was not the only problem I've encountered but it is the one I've wasted most time trying to resolve./

  • Help!!!  Brand new MBP with Santa Rosa Kernel Panics when started with...

    Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with external HD firewire 800 after 20 sec...
    I don't know what it could be???
    Do you???
    Thanx
    Jay

    I'm actually having a similar issue and I don't think its related to networking at all.
    I'm currently working in a corporate environment where we deploy pre-built OS X images to machines. I recently upgraded my images to 10.4.10 before we got our first Santa Rosa machine. This image was built on a MacPro and worked on all Intel Macs down to a MacMini CoreSolo. When I deployed my prebuilt image to the SR MBP, it caused a kernel panic immediately.
    Further investigation revealed previous builds of OS X, including 10.4.10 upgraded from any other model Intel Mac will kernel panic the SR MBP. Going backwards the SR Build of OSX will not work on any previous model Mac, as any other build typically does, but causes severe graphical distortion, as if it does not have the display drivers for the other Macs.
    To make a long story short, I think your issue comes from the fact that your external hard drive has an older build of OS X 10.4 than the SR MBP will run (even though you may have upgraded it to 10.4.10). Anyone who can corroborate my story with some more testing, please chime in.
    I haven't found a solution for this issue yet other than keeping a seperate Santa Rosa Core 2 Duo image for my deployments.

  • I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    This is for Windows: http://support.apple.com/kb/TS1538

  • I just bought an iphone 5 and the pin is missing, how can i verify it is brand new and i was not sold a refurbished phone

    i just bought an iphone 5 and the pin is missing, how can i verify it is brand new and i was not sold a refurbished phone

    after reporting a fake problem, i was asked for my serial number, i entered it and got this message
    Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
    Doesnt this mean this a returned/refurbished iphone? it was sold as brand new

  • HT1459 brand new ipod shuffle is not holding battery charge

    brand new ipod shuffle is not holding battery charge

    Why would you throw it away if it is in warranty? Why not exchange it?
    What kind of laptop is it?

Maybe you are looking for