Brand New MBP, cannot open iTunes & iMovie
Not good.
Just opened my brand new Mac Book Pro, migrated all my data and now I cannot open:
iTunes & iMovie...Not Good..
Any suggestions
Thx Daddy,
When a started the new MBP, it asked if wanted files from another Mac and I did that. I have done this many times before.
I did check to see if any files needed update and it is now updating files and such. Will let you know what happens after that.
Thx
Similar Messages
-
I cannot open iTunes. I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
I downloaded it and it and I continue to get the same message.
How do I fix this? Thanks, DeeUpgrade iTunes to the latest version. It should be 10.5.3.
-
cannot open iTunes. I get the message" the file--iTunes library.itl cannot be read because it was created by a newer version of iTunes. How do I proceed?
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
I cannot open iTunes. This is the message I get: "The file iTunes library .itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?" I did a download and it is up to date, but still won't open. HELP
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Cannot open itunes in windows 7, tried everything, hav 64 bit , new pc
Cannot open itunes in windows 7, hav new pc with window 7 64 bit but have not been able to open itunes after downloading in numerous times and ways. Consulted various but still won't open , icon appears but nothing esle. Need help,been tryin for months, ty!
ps, When I 1st installed my new pc, i downloaded itunes and it worked perfectly, then update appeared , after updating, haven't been able to open since.
-
Just downloaded Itunes 10.6 on windows7 64bit and now cannot open Itunes get error msg:ITunes Library.itl cannot be read because it was created by a newer version of iTunes.Tried uninstall and reinstall any help ? Thanks
Even I am facing a similar problem. Initially the iTunes worked on my windows 64bit edition. Ever since I downloaded the latest version it has stopped identifying my 4S with an error msg that asks me to download the 64bit edition. I have tried it again and again but it did not help. After unistalling and downloading again the new error msg says " the file- iTuneslibrary.itl cannot be read because it was created by a newer version of iTunes". Please help!!!!!!!
-
Cannot open itunes with this new ITUNES. HELP!
I upgraded to the new itunes and I am getting an error each time I try to open Itunes. What is going on? I cannot open Itunes or play any of my songs! WHAT DO I DO! I legally bought all of my songs in the past and now this is what is happening. This is wrong!
What error message are you getting? any error code?
-
I cannot access the iTunes store on my desktop. (brand new) I can access iTunes store on my laptop, so account is fine. When I go to sign in iTunes just says "Accessing iTunes Store" indefinitely. Have totally uninstalled and re-installed twice.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Lost all library and playlist files. I cannot open itunes on computer. Can I upload ipod music back on my pc?
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Aperture 3 not working on brand new MBP???
Just tried to open Aperture 3 on my brand new MBP and I get this error message:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
I downloaded A3 from the Mac Store, I've deleted it and re-installed and still get the same message. My MBP is running 10.6.8.
Any ideas, hope you can help.
Thanks!Hi, Thanks! The solution on the Macrumors forum worked! A plugin manager issue!
I've copied the solution below for anyone else who may run into the issue.
Turns out it's a simple fix.
For those with the same problem:
1. Navigate to: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
2. Delete the PluginManager
3. Get a new copy of the PluginManager. (You can copy one from a friends macbook) or use the one hosted here: http://qvenon.com/files/PluginManager.zip
Thanks again!
best,
upgrayedd1 -
Hey i bought a brand new MBP like 6 months ago and now it won't charge
i bought a brand new MBP like 6 months ago and now it won't charge. I tried using a friends MBP charger of the same year as my computer but it still says not charging at the top right corner of the computer screen where the charging symbol is. This problem just happened out of nowhere because it was working the day before then the next day it just stopped working saying it is not charging. I tired doing all of the suggested techniques to fix it but not luck.
This is the battery report is when my MBP is either connected to my charger or my friends charger which works perfectly on her computer.
Battery Information:
Model Information:
Serial Number: W013*****3BA
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 3137
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5751
Health Information:
Cycle Count: 126
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11528
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Wattage (W): 0
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: No
As you can see where it is labeled "AC Charger information" it states that its connected but there is no Wattage and says its not charging .
What is wrong with my mac? Is it serious and does Apple Care cover it?Have you done a SMC
http://support.apple.com/kb/HT3964
Items include
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity. -
I just downloaded the latest itunes update and I cannot open Itunes. Any suggestions?
I just downloaded the latest itunes update and I cannot open Itunes on my Imac. Any suggestions? I have OS 10.6.8
Hello, I am quite new on these forums, and mainy joined because have problems with latest update of iTunes, which seems to have caused problems of one kind or another for various people. I think basically people are now waiting for a 'patch' from Apple to fix things.
-
My pc attempted to update to new version of Itunes and got message MSVCR80.dll not found, failed to restart. I retried downloading; restarted. NG. Now I cannot open Itunes.
Hi yukejeff,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Cannot open iTunes. Running newly installed OS 10.6.8. Just had to upgrade OS in order to upgrade iTunes for my new phone. itunes was working yesterday and not today
Thanks again. The option thing got me further than I've gotten thus far but when I went to choose a library I got that same message.
I do have options. I have 2 iMacs. I can still access my music through 'sharing' and download it onto my newer iMac. Trouble is it doesn't have a CD port and I like to burn. From what I've read about their new Mac portable CD/DVD drive, it's shaky at best. Incidentally, do you know of any drives that work well with Macs and cost less than $89.00?
I've figured out I can download a previous library from my old Mac then upload it from the new one which should put me back in business, but what do I do with the corrupt one that's there now, just trash it? Also, when I do the option key my other choice is Create A New Library. Should I do that and put the good previous library into it?
Thanks a million, I really appreciate your time. I'm an old fogey and computers often mystify me, especially when they lock me out of things for no apparent reason. -
I am trying to use mail merge in Word for Mac on My brand new MBP 13". And I get the error "there is not enough memory or disk space to convert this document". What gives? Help please!
Why do I get there is not enough memory...: Apple Support Communities
Error message in MS Word opening a .docx file "There is not enough - Microsoft Community
Maybe you are looking for
-
Hi All of a sudden, the office web apps is not working. I get the below issue Could not load new WOPI Proof Keys for server XXXXX against Discovery. Also, i could not see the Office web apps site collection feature. Please suggest.
-
I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for o
-
Sales Order Completed Status through STO SD Delivery
Hi, (a) Demand is created for FG with strategy 50 for 100 qty in plant 1000. (b) Sales Order received for 100 qty with customer as alternative plant 2000. (c) Production completed in plant 1000 and now stock is available specific to that sales order.
-
Two SWING apps show different UNICODE bahaviour
We have developed two SWING applications. In both of them we save information by writing to disk using UTF-8 format. When the files are read back and displayed using JTextField then one of the applications is able to display the (Bengali) characters
-
First one - it couldn't find the file iTunes.msi, nor could I find it when I searched my entire drive. Then it told me that "The older version of iTunes cannot be removed. Contact your technical support group." So iTunes is dead to rights on my PC.