Brand New mobo (P6NGM) with IRQ Conflicts, PLEASE help
I've posted multiple times in another well respected PC forum and have not resolved my issue yet. Would GREATLY appreciate assistance.
Here's my story and attempts:
I'm building a new PC for my parents:
mobo: MSI P6NGM
cpu: Pentium dual core e2200 (800fsb)
memory: 2g DDR2
video: Radeon 9600PRO 256MB PCI-E
I'm having problems in Device Manager.
the modem (Smart Link 5k Voice Modem) and something called the NVIDIA nForce System Management Controller both have a yellow-exclamation point on them and when I looked at their properties\device status says:
Quote
This device cannot find enough free resources that it can use (code 12).
If you want to use this device, you will need to disable one of the other devices on this system.
I have all of the current drivers and latest BIOS installed (and confirmed).
I believe it's telling me I have an IRQ conflict and when I looked at the Device Manager \ Resources by Type, it tells me that there are 3 devices on IRQ 7, 2 devices on IRQ10 (my PCI-E video card and the 56k modem), and 2 devices on IRQ11 (the NVIDIA nForce PCI System Management).
I did a google search and tried disabling the com ports 1 & 2 (but could only find & disable com port 1)
but this didn't improve the problem.
I also tried un-plugging 2 front USB-2 ports from the mobo.
no improvement there either.
meanwhile, IRQs 2, 3, 4, 9, 14, and 15 are empty. Is there any way to assign to these?
Please help. I just built a dual core AMD with another MSI mobo for my daughter last month and didn't have any issues with it.
yes, i tried switching to the other PCI slot (this mobo only has 2). no improvement
Last night, I also tried disconnecting everything (3 USB ports connected to the mobo) and performing a fresh install of XP. I was extremely disappointed that this didn't work either.
I also tried unistalling all of the devices on IRQ10 and rebooting with IRQ10 Reserved (so all of the devices would be assigned to something else). Then I uninstalled the modem again and enabled IRQ10, hoping that everything would have been assigned elsewhere and only the modem would be assigned to IRQ10 this time.
NO LUCK!
I've NEVER had so much difficulty with IRQs, and only installed 2 devices: the PCI-E video and a PCI modem.
Similar Messages
-
Brand new MacMini keeps dropping wifi signal please help
Hi i have a brand new macmini which has been working perfectly fine untill today where safari seemed to be really slow sometimes not even loading searches, i checked if my wifi was connected but it changes from connected to searching for network.. My router cant be the problem because its in the same room and i have 6 other apple devices that work fine..ive searched all over for solutions and tried some but still no luck..does any one have an idea as to what i can do to resolve this annoying problem please?
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
Brand new ipod touch suddenly stopped working. please help!
I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped. I even connected it back to my mac book but nothing happened. please help! i've only had it for two days!
That sounds like a mechanical problem. You might want to insert and remove the headphone plug several times and see if it fixed the issue. If it does not, call Apple. 800-275-2273 in the U.S.A. and I think Canada.
-
Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allanIs that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp -
I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!
The same thing happens to me, Safari asks me to update the Adobe FlasPlayer, I download, start the installation process, ask me my username and password in order to install, then see a window where I choose if I want to always install the updates , or ask first, or not inslate updates, and at this point it is not progress, I can not cancel the process, I turn off and turn on my machine.
What can I do ..??
Regards. -
My brand New Macbook Pro with Retina Display is slow.
Just today I got a brand new Macbook Pro with the Retina Display. Last week I got the same one except the base model ($1300). Today I decided I wanted a much faster one with better storage so I decided to exchange it for the higher end model ($1500) with 8gb ram and 256gb ssd. When I went to speedtest.net, the results were really dissappointing. I got 65 ping, 15mbps for download speed, and 2mbps for upload speed. My previous new Macbook got a 13 ping, 20 mbps for download speed, and 6 mbps for upload speed. I've restarted my computer many times but got the same results (even with different browsers). Does anybody know why is this?
Hi gluMoster,
It's frustrating when laying out your hard earned cash on technology to find out that it just doesn't fix your issues. Fortunately it sounds to me that your issue is your network and/or internet service provider. The "speedtest" only checks your connectivity to various servers on the internet, and doesn't really test out your laptop.
For a hardware(laptop/desktop) test I recommend geekbench which can be found at http://www.primatelabs.com/geekbench/ the tools here will test your machines processor and give you an idea of your hardwares speed.
To remedy your problem I would first check your wireless router (I am assuming your laptop connects to the internet wirelessly) and see if it is atleast N capable. I see routers all the time that are B/G that get old and just can't deliver the speed that new and added network devices and websites require to function frictionless. If your router is an N or better yet an AC, then we'd need to look at your modem or your service provider. If you have ATT DSL, there have been reports, somewhat confirmed, that they are dialing down things on the DSL side in order to persuade their customers to move to Uverse, but you didn't hear that from me
If your router is ok, and the modem too take your laptop and sit it relatively close to your wireless router/access point and run the speedtest again. It could be that some new piece of furniture, or maybe even cordless phone is blocking the wireless signal to where you use your laptop most.
Best of luck,
damon -
Finder is really slow ( 15 sec.) after mavericks update on brand new iMac 27" WITH fusion drive...
When looking up files it's fine, but when trying to save or open anything through ANY program, i.e. Adobe CS6 programs, Microsoft Word, but also Apple software, finder is really slow (15 sec. or more of the same spinning beach ball) after the OSX Mavericks update on my brand new iMac 27" WITH fusion drive... This ***** really bad because it totally disturbs the smooth workflow I bought the iMac for in the first place...
Any suggestions?
Already tried 'clearing the plist file' through terminal; didn't work... Rebooting (obviously), didn't work.
Will there be a fix soon?
It's costing me way to much time waiting for the finder to show it's content when working.
Any official word from Apple on this?I had a similar problem. Tried repairing disk permissions, tried cleaning up with onyx and applejack with no luck. Finally what did work was simply starting up in safe mode (hold shift key down after restart) and it sorted itself out
Hope this works for you -
how use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me
You must be using an update CD. You need the software that has the full version first - install that, then you can use the update one if needed. I know, cuz I made the same mistake - lol
-
yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me
What e-mail are you talking about?
What exactly did it say?
Are you sure that the e-mail was not your receipt? -
My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....
No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.
-
My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!
Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do... -
i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest
Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
i want to downgrade my 2011 mac mini server to mac os x i have the disks but the mini willl not reboot the apple changing to a circle with a line please help-
bpruse, I may be completely off-track for your issue, but I had a similar situation where I wanted to downgrade a Mac Pro from Server to plain OS X and it would not boot from the OS X install disk.
I was attempting to use a full-install OS X.6.x disc with an earlier SL version than that which originally came installed on the Mac Pro. After two or three hours of fiddling, I figured it out and used the discs that came with the system.
However, I don't know how that would work in your case if this is the mini server-version. I'm sure the disks would only have Server on them. Worse-case scenario, find out which X.6.x the OEM disc is installing and get an OS X disc with a new installer.
HTH.
lnail -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service.
Maybe you are looking for
-
What Tech Specs are needed for iOS developement and other game developement?
I am looking to buy a new macbook pro most likely the retina because it has a much higher resolution and flash storage which will make it much faster than a regular macbook pro. I am going to use this computer for programming including iOS developeme
-
I have an imac with OS X version 10.5.4 and only recently I have not been able to watch any video on my computer. Sites like youtube will have a blank screen where the video is supposed to be. There is no spinning ball or signs that the video loading
-
Best way to convert In-Memory bitmap to BufferedImage
Hello! I am working with DirectShow on a Windows system to access a camera. From DirectShow I get called back on every frame with a Pointer to a native Buffer which contains a Bitmap (http://msdn.microsoft.com/en-us/library/windows/desktop/dd376985%2
-
I recently purchased a new computer. Now when I scan a document and save it as a pdf document; the size of the file is nearly 10 times the usual size. The size of 2 pages is so large that I can not send as an attachment. How do adjust the size of the
-
Quicktime Screen capture error on start
I am opening quicktime and wanting to do a "New Screen Recording" and it goes straight to an error then closes the window not being able to adjust the settings within the screen recording. Is there a preference file I can trash to reset the settings?