Brand new piece problem PLEASE Help Me!!!

I purchased 7210 supernova & 5130 music express & within an month supernova earpiece was not working & mike too & about 5130 music express one one sim card works I tried to inser another sim card it doesnot works..and when i asked the dealer about these problem, he says circuit problem of 5130 so i asked him for replacement he says no for replacement. According to me if any eletronic gadget persist problem with in an month we get replacement
I asked for both model replacement he said NO for both the models...!!!!
what should I do ??Plase help
dealers address: Point-2, 6, sonal palace, phadke road, dombivli (east).Mumbai-Maharashtra

Not Charge
- See:    
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod      
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
  Apple Retail Store - Genius Bar
and
try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar                              

Similar Messages

  • Just got my brand new ipod touch please help

    I just go my 3rd generation ipod touch and when I try to turn it on there is a usb and a itunes cd with a music note on it please help.

    Welcome to the discussions.
    It sounds like [this is the screen|http://support.apple.com/kb/TS1275] you are seeing. I think that will help guide you through what to do.

  • Re: Old iWeb to new iweb problems -please help

    1. I've been experimenting with the new iweb, and I inserted the html on the page,
    then I uploaded onto the internet to see what it looked like, and now I can't delete
    the html from the page. What should I do?
    2. I took my original iweb pages and created new pages with the new iweb
    using the original addresses, and on the internet, it says page not found.
    What should I do?
    3. I have videos created with imovie, but in the new iweb they are not showing up on the internet, they upload to a folder, but not onto the internet, I tried everything. What should I do?
    Thanks,
    Barbara

    1) Do you mean that you insert HTML into a snippet box?. If so, delete the box and republish.
    2) If you are publishing to the Apple server then the page URLs are different. iWeb '06 publish to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb folder and iWeb '08 publishes to Finder/Go/iDisk/My iDisk/Web/Sites. The old URL will have iWeb in it and this needs to be cut.
    30 iWeb '08 stores your movies in the "Media" folder. Make sure you have uploaded it.

  • Hello Guys. I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD? Please Help. Thank You

    Hello Guys.
    I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
    Please Help.
    Thank You
    Julio Skov

    Hey
    Thank you very much for replay.
    Would you explain to me how can I do?
    I don't really understand these processes.
    Thak you very much
    Julio

  • I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

  • I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

    I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

    With iTunes 11 you can enable the left-hand sidebar via control-S on a PC, option-command-S on a Mac. If you are trying to get it to the iBooks app then with the sidebar enabled the process should be similar to how it was on previous versions of iTunes e.g. add it to your iTunes library via File > Add To Library, connect the iPad and select it on the left-hand sidebar, and then use the Books tab on the right-hand side to select and sync it to the iBooks app.

  • I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

  • Uh oh huge problem please help me!

    Ok so long story short, i made a 2nd account, i was on it setting it up etc, i was looking at the recent what i did today, and for some reason i wanted to clear that up because i don't know i just wanted it to be clear i guess because i'm a perfectionist lol idk. ok so anyways, i dragged all that to the trash (i'm an idiot i know, AH i don't even know why i did that but ugh.) so a ton of stuff was then in the trash, including the applications like settings and garageband and a bunch of other stuff.
    So then i realize what's now in the garbage and i get it out, put it on the desktop, etc. i click on it on the desktop and some of it opens but not really, because it says i have to reinstall it, or else it just doesn't open at all. so i can't even open the computer settings because that's one of the programs that won't open!!! and i can't use time machine because i just got this computer and hadn't yet set up time machine.
    Basically, now i can't open like any of those programs and it's a huge problem. what should i do? i want to just somehow get the computer back to when it came out of the box, like get everything off it, reinstall leopard, and start fresh. how do i do this, or do you have a better idea? oh and also what will happen to my itunes library? how can i keep it the same, because i had spent like hours getting all my songs onto my new computer and getting my iphone to sync with my new computer and making my iphone work officially with my new imac.
    Please help me!! oh and please don't be like wow you're stupid why would you throw that away, because i didn't even mean to and i know i'm stupid lol.
    please only answer if you can help me! oh and sorry about the bad typing i don't feel like capitalizing since this is so long. thanks! i hope you can help!

    You may get more response if you post in the ipod Nano forum.

  • NEED NEW CARD! Please help

    Alright, well my dumbass roommate decided to plug in his super nintendo to my TV@nywhere card. To make a long story short, he messed something up. The computer wouldnt boot. It would get to the windows screen and freeze. I formatted, problem was no more, untill I installed the VGA drivers.
    So now I cant do anythign with my screen, if I install the drivers, it wont boot.
    Now I plan on just getting a new VGA card. Was looking at some nVidia products, but I am uncertain what to get. I want to spend $50 or less (eBay).
    I have the MSI 651 MEGA PC. It says it has a APG 4x x1 slot on board, so I was just wondering what suggestions you guys had for a new card. Please help out if possible, thanks!

    Try the second hand ATI 9600XT.  

  • X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

    9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
    So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
    I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
    So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
    Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
    So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
    I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
    There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
    I don't know.. I need clarification and help, PLEASE.
    Thank you very much in advance!

    Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
    All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

  • Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

    Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • System D.O.T automatically why? problem please help me

    hello everybody,
                           please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY  ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
    PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
    MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
    DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
    MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
    MSI CD ROM
    SONY FLOPPY
    COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
    STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
    AMI BIOS 3.4
    SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
    WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !

    Hi,
    Go to here for MSI LIVEUPDATE
    http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
    Install and run program.........
    BIOS problems:
    http://www.msi.com.tw/html/support/bios/note/boot.htm
    If you would like to download bios and install........
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
    You can also choose 3.7 if wish too first.....
    I am sure this will help you.
    Del

  • 990fxa gd80 raid 0 problem please help me i am begging you

    so i will start with my set up
    990fxa dg80 mb
    fx 8350 cpu
    780ti
    8 gig of ram
    256 hdd
    2x samsung 850 evo
    750 hybrid drive
    So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for help

    I..have a few questions...
    1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
    2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
    3. Is your Win7 64 bit or 32 bit?
    4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
    And make sure you get the driver from here:
    http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64

  • Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Nevermind, I got it working.
    I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

  • HT201272 I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help

    I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help.

    Audiobooks are currently a one-time only download from the store. If you don't have it on your computer (audiobooks go into the Books part of your iTunes library) nor on a backup, then if it's still in the store you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Maybe you are looking for

  • Disappearing icons...

    My App Store disappeared from my home screen. How can I get it back? I've tried restoring the home screen but that didn't do it...

  • Create ADF page based on wsdl is passing null values

    Hoi, We are creating some simple ADF forms te demonstrate our webservices that we have created for our customer. The first one was created without any problems. The second one is more complex and now i am having a problem running it. I noticed that t

  • %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet.

    Hi Everyone. I was making some changes in  routers and after I rolled back configuration  a gre tunnel won't work. It's GRE Tunnel between a Cisco 7600 and Cisco 2851. It seems like 7600 sent packets unencrypted. On C2851 is received this message: %C

  • Photoshop CS5 Nik Color Efex Pro4プラグインでフリーズ

    MacProにインストールされているPhotoshopCS5.1で.プラグインソフト"Nik Color Efex Pro 4"を動かそうとするとフリーズする. 様々なアクションの文字がグレーになり動かない. 「ウィンドウ」の各項目は黒文字のまま. ドックからの強制終了も出来ないのでCommand+Option+Escからの強制終了.

  • Question about recycle program

    I know that Apple gives a 10% trade in for any older ipod at it's stores, but are you limited to one? I have been trying to fix some older ipods and would want to trade them in if I could get a discount on a new ipod. Thanks in advance for any inform