Brand new WRTP54G EXTREMELY SLOW when WiFi active

I just unpacked and installed a new WRTP54G VoIP WiFi router (Vonage) and got it up and running pretty quickly. However when I join my laptop to the wireless network everything became terribly slow. I watched my ping response times on the directly-attached desktop increase dramatically and actually had ~5% 'Request timed out'. And to complicate things further, this directly attached desktop had a horrbly slow time loading the Linksys mgmt pages- way worse than dialup- almost like the networ was being DOS'ed. I actually plugged in my aircard to send this message.
Has anyone else seen this behavior? I'm running on firmware version 1.00.18.
Thanks in advance.

Thanks Arupis,
The equipment is brand new to me so I'm not familiar with how to re-flash the firmware. Can I do this and save my config through the web mgmt interface? I know that Google is my friend but he likes to play more than I'm in the mood for and I often spend more time than I'd like (with 4 kids running around) searching for the correct process.
Thanks again for your suggestion.

Similar Messages

New iMac extremely slow!

Hello,
I've recently started using After Effects and finding that my imac is EXTREMELY slow when exporting my projects.
Not only is the export slow, but I can't do anything on the computer while the export is running. If a song is playing on itunes at the same time, it will start skipping every few seconds. If I want to bring itunes up or bring up safari (when it's already open) then the beach ball comes up and it takes several minutes for each program to load.
To give you some background on my situation here are my imac's specs:
27" imac, purchased in August 2011.
Running version 10.7.3
Processor: 3.1 Intel Core i5
4GB Ram
2TB harddrive. (1.88 TB available)
Ever since purchasing my imac I had issues with it not functioning very well. I wasn't using after effects at the time, but whenever I had something running on compressor I wasn't able to do anything on the computer. I eventually brought the computer in to the apple store and they replaced both my fans and the logic board. After getting it back I noticed the harddrive was extremely loud and brought it back again. This was about 2 weeks ago and apple replaced my harddrive. So right now my fans, logic board and harddrive are all brand new. Today I started hearing my harddrive again (not as loud as it was before, but I can definitely hear it working).
When After Effects was running, the only other programs running were Mail, Safair and iTunes. A few days ago it was acting up when FCP and After effects were both on at the same time. As well, the After Effects projects I'm working with are not very big. I'm doing VERY basic text-motion on clips 30 seconds long at most.
Any idea what can be causing this? and why is it that I can hear my drive working? If I'm correct I shouldn't be able to hear it...
Thanks!

But what can be causing my harddrive to make sounds?
As well, I noticed the computer getting pretty hot recently. Today I wasn't running intensive programs, just watching some shows on Netflix (with itunes and Mail being the only other apps open) and the Imac HD temp was almost at 60 degrees C and the CPU around 50. Is this normal?

Zen X-Fi2 extremely slow when loading playlists!

0Zen X-Fi2 extremely slow when loading playlists!?I recently purchased a Zen X-Fi2 64gb. I'd been waiting for a player of this size for a few years now but Creative was behind the power curve so I temporarily switched to an Archos 80gb. After the Archos began to annoy me I ended up just going with the Zen 32gb flash based player. It works/ed great. This new Zen X-Fi2 however is unbearably slow! I don't mind quite sometime to rebuild the library once the initial sync is done but when it takes 5 minutes to load a playlist (3000+ songs) then I get upset. It takes so long to load said playlist that the player shuts off before it has time to load all the songs. I can't even just click play right away like I could on the Zen. The only way I've been able to get around it is to tap the screen twice. Once to load the playlist (which takes forever if it's more than 00 songs) and again to play once the lengthy loading process is over with. However even then it doesn't load all the songs. I've been communicating with tech support about this with no resolution in sight. All they keep telling me is how 'normal' it is for a player to load a large number of songs. My Zen which is an MTP player syncs and plays music much faster! Is there anyway to possibly upgrade this to an MTP player?

Hi Vokivolli,
Almost 2 months on from your original post I see that you have received no reply from an administrator. Are these problems still persisting with your player? I have an X-Fi Style too and am experiencing the same problems. Like you I was hoping that firmware updates would address the problem. I don't think that the Style is a priority for Creative and unfortunately I don't see them bothering to solve these issues. Hope I'm wrong cos otherwise I love the X-Fi Style.

Brand New Airport Extreme Doesn't Wake the iMac

I have been having MASSIVE problems with Back To My Mac, so I figured the Airport Extreme was the problem, since it was two years old. I replaced it with a brand new one. Now I have two problems: Back To My Mac still doesn't work, and the brand new Airport Extreme cannot wake the iMac.
The iMac has "wake on network access" enabled. The two-year-old Airport Extreme was able to wake the iMac.
What do I need to do to enable this feature on the new Airport Extreme?

No, that doesn't address the problem. The two-year-old Airport Extreme could wake the iMac with either a wireless or an ethernet connection. According to Apple's documentation, if the preferences say "wake on network access" it means both should work, and they used to.
The brand-new Airport Extreme cannot wake the iMac at all. When I installed it, I used the new Airport Utility to copy the settings from the old one. Could it be that some setting necessary for waking the iMac was set incorrectly by this process? If so, how do I correct it?

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

Press the escape (esc) key to exit full-screen mode.

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible? I have the Airport Express now and it works fine.

Just bought a brand new airport extreme and having trouble with it being recognized. My mac is version 10.5.8. What should I do?

The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
From Apple's Specifications:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
A few options.....
Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
Use....or borrow an iPhone or iPad to set up the Extreme

IOS6 extremely slow when updateApps

iOS6 extremely slow when updateApps on my iPad2. why?

Try clearing history and the cache...
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaning boxes then click Reset.
Quit and relaunch Safari.
See if that made a difference.

Brand new Airport Extreme Base Station flashing Amber light

hi
I know this question had been addressed before , but i couldnt find satisfying answer yet
I bought this Brand new airport extreme base station, I hooked up my ethernet cable into WAN Port as per the manual.
I installed airport utility 5.1 on my windows xp SP 2 laptop
and then I powered on the base station
The light in front was Solid Amber and then it turned Flashig Amber .
I tried resetting the base station and Cable modem. but no luck with Flashing Amber Light
Any Help for beginner Apple user?
thanks
Airport Extreme Base Station ( 802.11n) Windows XP SP2

Here is another post that addresses your question:
http://discussions.apple.com/thread.jspa?threadID=1005682&tstart=15

IPhone 6 and 6 plus camera extremely slow when using flash

I have noticed that the iPhone 6 and 6 plus camera is extremely slow when using flash, it is definitely slower than iPhones 5 and 5s.
Any explanation/solution for this?

I Have done some more testing and it seems turning off HDR resolves the issue

HT201364 I literally just opened my brand new MacBook Pro, and when I attempted to download the OS X Mavericks, a screen popped up and told me I couldn't complete action due to a host of reasons...I just took the **** thing out of the box, what gives?!

I literally just opened my brand new MacBook Pro, and when I attempted to download the OS X Mavericks, a screen popped up and told me I couldn't complete action due to a host of reasons...I just took the **** thing out of the box, what gives?!

Your machine already has Mavericks installed. Why are you trying to download it?

I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections

Extremely Slow when Opening a new tab

I have just bought my new Retina MacBook Pro after my 3 years Macbook Pro 13" is total lost and get the Mountain Lion OSX with latest 10.8.2 version
After migrating the MacOSX from Snow Leopard to Mountain Lion, my Mac is everything ok but without Safari.
Once I wanna open a webpage from bookmarks bar, I usually open a new tab then click one of webpage in one of the bookmarks bar. The problem was happened in this action.
After I opening a new tab which I have set to show top site rather than History (all top site are locked like a set of bookmarks), the system extremely slow down even I just move my mouse from one bookmark to another on the bookmarks bar, it still have a bit serious delay more than a second.
I have just tested, if i choose history not top site is shown when I am opening a new tab, the performance really better. However, when I scroll to somewhere all have thumbnails for those webpages, the performance still slow down but not yet as serious as the top site and I think becasue I have choose over 12 webpages for topsite (which are all have thumbnails).
My new Retina MacBook Pro is the lower default spec i7 2.3GHz and the version now is MacOSX 10.8.2 with Safari 6.0.1
one of place I want to mentioned is my Safari and Safari Webpage Content are over 500MB once I have opened. Is it common and normal? I feel really upset that my new Mac doesn't really faster than before but the older one is Core 2 duo and 4GB ram vs the new one is i7 2.3GHz and 8GB ram....oh my god

Try clearing history and the cache...
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaning boxes then click Reset.
Quit and relaunch Safari.
See if that made a difference.

Does new Airport Extreme slow down when used with Airport Express?

Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.

The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

YouTube extremely slow when accessed using WiFi

I find that, in the last day or so, accessing YouTube has become painfully slow when using WiFi. It was working fine earlier in the week.
EDGE connections have faster downloads but the quality is really poor.
Anyone with similar problems? Any explanations as to what might be causing this?
Thanks,
Anil

Bump to this, I am also experience the same issues as well with Youtube being slow on WiFi compared to the horrific version on EDGE. I would think this to be a Router issue, but I have yet to test it out by shutting down all other applications that access the router as well as other computers that use the router.

Brand new WRTP54G EXTREMELY SLOW when WiFi active

Similar Messages

Maybe you are looking for