Branding inside html ewa reports

Hello,
Anyone know if it's possible to modify SAP logo or add a new company logo inside html ewa reports ?
regards,
Luis

Hi Luis,
Unfortuantly, as far as I know it is not possible to modify the EWA report (no customizing is possible).
However, what you can do is change some parts of the Service Level report which is subset of the EWA report which might help.
You can change the Frontpage and Header and Footingin the SLR setup,
when you navigate to node "Variant <variant_name>", in tabs
- Report Front Page Customizing
- Report Header/Footer Customizing
Please see further details in www.service.sap.com/slr -> Media Library
> "Service Level Reporting - Introduction", page 13.
Unfortunately the SAP Logo cannot be removed or replaced from the SAP
Standard Reports, but you can add/remove lines of text as per the
docuemntation above.
Thanks and Regards,
Roland

Similar Messages

EWA Report as Word Attachment to email address

hi
Currently I have html format of EWA report automatically sent to Basis Team email id .
How do I get EWA report file as MSWORD Attachment in email.
Yes. I can see that in Solman System , MSword file is generated ., But emailed only HTML version.
Hope you got my Point .

Mahesh Gangula wrote:
Thanks for all your replies .
>
> SAP Already confirms that , Thats not possible.
>
> My Client Manager Asking , why EWA comes are In-place(email body) HTML .
>
> Can we make it asd HTML Attachment as email delivery ?
Hello Mahesh
The main technical difficulty is the fact that many a email servers reject HTML content as a attachment. Plus the fact that the EWA report uses IGS services if opened as a HTML page will fail all the time since the email is not connected to the IGS server of the Solution Manager.
Hence a mail body is created instead of a attachment.
I hope that you now understand the technicality of the issue.
Regards
Amit

View EWA reports

Hi!
I have succesfully installed and confugured my Solution Manager and have connected 3 business systems.
I have configured OSS-connection, SCCN, EWA.
Now I am about to view EWA, but I do not see any files or glasses sign i n Tcode DSWP.
My quetion is: <b>how can I read/view the EWA as .HTML or MS-Office document?
Is there some configuration steps to do this?</b>
Thank you very much
regards

I understand that you are askin abt generating EWA reports as word document..
If this is the case,pl go thru the following steps.....
DSWP>Solution Monitorinig>EarlyWatch Alert-->select the system for which the data is available(click on the word document, which is just next to the specks symbol)
before generating the word document, U need to make some adjustments in the MS-Word settings..Open ms-word document,goto TOOLS>MACRO>SECURITY>TRUSTED PUBLISHERS,select the two options(trust all.....& trust access to VB..)>OK
Then click the MS_Word symbol(of corresponding system) in Solution manager.
It will prompt you to mention the report type...EWA Report/EWA with Grapics...select any one of thm.
save it to desired location.
I hope this is what you are asking abt....
rgds
Venu

EWA Report Issue: No complete data is populated in EWA report

Hi All,
I am facing a problem where in, the generated EWA report for our XI system is not poplated with the complete data. This problem is there from past 2 months and before that this EWA report for XI system was duly generated with full and correct data.
There has been no changes in the recent time and all of a sudden this problem erupt. May any one help me in diagnosing this problem and solving it? Help is greatly appreciated.
Should there be any queries, please do ask me.
Waiting for your kind replies.
Regards,
Faisal

Hi Faisal,
Last time I asked you if the Red flag was gone.
You are saying the ABAP data is missing.
This would mean there is a Rated EWA report missing the ABAP instance data.
Does this mean it is a dual stack and the Java data is present.
EWA is a pretty straight forward process, so if you follwo the process, you can usually narrow down where the problem has occurred.
If ABAP data is missing in a generated EWA report, the first place to look for that missing data is in the service session.
You can view the service session by clicking the eye glasses under tha activity column in DSWP, or entering the session number in transaction DSA. If the data is mssing, then it never got to solution manger from the managed system, so you would then check the RFC functions and the RFC user has a valid logon, THere would be no point checking SM:EXEC:SERRVICES, or authorizations if the data is not int he service session.
If the data is in the service session and is missing, then it would be in the processing of the session into a Word ot HTML document, not the processing of the service session, because it would be processed and rated already by SM:EXEC SERVICES..
I had explained that you create an EWA and it is scheduled in DSWP > Solution Monitoring > Earlywatch Alert
it creates a service session, with a number and a tree. This is determined by the defintions in SMSY and the mapping to the DMD. It is scheduled for a date and time. On the managed system via RFC throught the maintenance package task in SDCCN or perhaps a scheduled refresh session taask, runs and via RFC to SOlman, logs on with the RFC use (SM*_BACK) and gets the
session numbers of unprocessed servies sessions for that SID. If it can't open the service session, it will just find not sessions to refresh. If it can, then an EWA task is created that will prepare a transport with the collected data. So if the collectors have issues, data won't be available. ST-A/PI and ST-PI are involved on colelction of data and preparation for transport on managed systems. But there is also SAPOSCOL and ST03 and ST06 that need to be checked. The SDCCN EWA task log. Then it sends the data back to Solman via the RFC and either the single Flask or the red flag will then turn to 2 flasks indicating the data is ready to be processed by SM:EXEC SERVICES. SM:EXEC SERVICES processes the session, populates it, and rates it.
Then you can look at the session in DSA o DSWP, you can geerate the report in Word or HTML.
So this is the process.flow overview. And it helps to know where it gets to in the flow to determine where something went missing or if it was ever there at all.SM:EXEC SERVICES doesn't colelc the data. So if it processes a service session the user had the authorizations. If the data is not int he service session its because it was never passed to Solution manage.
Iif the data is in thd service session, but missing from the report, then the issue is likely with ST-SER, or perhaps SCU.update has not been applied.
I suspect that the data is not in the service session and you are still having issues. Is the EWA still red flagged? Yes or No?
If yes, then you still have an issue where no ABAP data was sent via SDCCN to Solman. If no, then likely there is an issue with
collection, where data is being sent, but some data is missing, and this could be due to errors that have not been addressed in the SDCCN task logs. Or it could be problems wit SDCCN service definitions, and may need to be replaced.
I hope tis helps.
Regards,
Paul

EWA report is not opened in dswp

Dear all,
I got an error when i opened earlywatch report from DSWP for speacfic Solution.
Kindly check below error .
E-Mail Hint: to search, select this document and choose Ctrl+F
Error: An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause, Program CL_GUI_GP=====================CP, Include CL_GUI_GP=====================CM017, Row 1
Kindly advise

Hello Satheesh,
You can try updating the SAPGUI, as suggested.
But I think this problem is related to MS Word.
Satheesh, one way you can confirm the proble is with MS Word is to open the HTML version of the report.
Instead of clicking on the Word Document, either 1) Click on the eye classes, when the session opens, click the HTML button on the top, or 2) On the left hand side click the link.
If the HTML version opens then you know the problem is limited to just MS Word...if you have a problem with HTML, perhaps it is the SAPGUI. I suspect you will be able to open the EWA report in HTML. That can be a workaround until you implement a solution. However if it looks like it is limited to MS Word then I would advise the following.
Please check SAP Note 199123 - Word Settings and make sure that everything is set as per the note for yuor versio of MS Word.
If you are getting the error " MS Word Template Assignment failed" then you will need to apply SAP Note 1172706. If you are using Word 2000, that version is not supportedand you will need to be on at least MS Word 2002.
Also be aware if you are on Windows 7 or MS Word 2010 you should be on SAPGUI 7.20.
Regards,
Paul

Short dump when running EWA report

Dear Expert,
I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_GUI_GP=====================CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Missing RAISING Clause in Interface
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     1
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Trigger Location of Exception
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     19
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Please advise asap since we need the report immediately.
Thank you in advance,
Rudi

Hi,
[This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
feel free to revert back.
--Ragu

Missing data in weekly EWA report

Hello SDN,
I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report.
Section 11.2 (Response Times) includes a graph showing the Top 5 transactions. The transactions are listed as Transaction 1, 2, 3, 4 and 5 on the graph and there used to be a table below the graph that showed that (e.g.) Transcation 1 was MMBE, Transaction 2 was LT27, etc..
For some reason, that table no longer appears and the graph is of no little use on its own, because I have no idea what transactions it refers to.
Has anyone else experienced this problem?
Thanks,
Arwel Owen.

Hi Ragu,
The strange thing is that this table used to be displayed up until around 6 weeks ago, when it just disappeared off the EWA report. Nothing was changed (knowingly) to cause this. Also, the graph that the table refers to is still included in the report, it's just the table that's disappeared. If anything had been changed, I would have expected both graph and table to change.
Thanks for your help.
Arwel.

Multiple Reports inside one Single Report

Post Author: maximus85
CA Forum: Crystal Reports
Hi....I'm having this problem of having multiple reports inside one single report. Basically what i wanted to built is a Dashboard that contains 4 main subjects:i)Sales - Contains graph that can be drill down for further detailsii)Internal Process - Contains tables that can be drill downiii)Profit/Lossiv)HRAs far as i know, since all four are of different fact table data, they cannot be all thrown inside one single report to be built on. So i came out with using subreports instead for each components and then finally putting them all together as subreport inside the main report(Dashboard).However, i just realized that by doing that, whenever i clicked on the reports that i wanted to drill down with, it will prompt that particular report that i clicked into a new page, and then from there only i can perform drill down.Is there anyway to enable me to straight away drill down the Sales and Internal Process reports from the main reports(Dashboard) instead of having to click twice as that will be unnecessary right?Or mayb if there's another better ways to do what I have to do? Please do advise and suggest......Thanks alot.......

hi chack,
doesnt matter or preferrably both, as long as i can export all the reports in 1 page into 1 excel, or 1 pdf.

Where can I get an Html error report of all the syntax and tag problems?

Where can I get an Html error report of all the syntax and tag problems?

Thank you for your answer.
Where is the DW validation for me?
My files are in my computer so I don’t have an external URL.
File > validation > as xml = closes DW... Maybe because it is not a correct command for HTML,
And
Window > results > validation = gives a partial mistakes (e.g. shows an open tag without closing tag, but doesn’t show a closing tag without an open tag).
Thank you.

SAP Insider Conference on Reporting and BI - April 20-22, 2009

The first of five SAP Insider Conference semiars will be held next week, don't forget to register for the one closest to you!
SAP Insider Conference on Reporting and Business Intelligence with SAP and BusinessObjects
April 20-22, 2009 in Las Vegas, USA.
Other dates and locations include Orlando, Chicago, Boston and Frankfurt.
Registration and additional information including agendas and speakers can be found [here|http://www.biseminar.com/homepage.cfm?usergroup=us].

Hi
I have access to nearly 10,000 SAP related industry presentations from various sources which I have been collecting over the years. I intend to provide links to the BI related presentations which are freely available. I have started with a post to this forum.
In regards to user group information in Australia I have been on the SAP Australian User Group executive for a number of years. SAP University Alliance members pay approximately $AUD500 annual membership for the user group. We have created best ERP student prizes ($500) for these university members so the membership dues are indirectly returned to the universities. It is up to each university to determine how they award these prizes. The best students are listed on the user group web site (www.saug.com.au). This encourages university membership in the user group and raises the profile of the user group with students. Approximately 50% of the university alliance members in Australia are members of the user group.
In addition I facilitate staff and students contact with member companies for the purpose of research. This tends to be in the format of interviews at our events rather than surveys.
We also utilise university staff at the user group events to conduct education sessions as a foundation to some of SAP's solutions. For example data mining 101, business process modelling 101, MRP 101. This brings academia and industry closer in the SAP ecosystem.
I hope this provides some ideas for the ASUG collaboration
Regards
Paul Hawking
SAP Academic Program Director
Victoria University
Australia

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

Email address in EWA reports

Hi gurus,
May be a simple question but I am new to Solution Manager and every morning we get emails from an email adress attached ewa reports. How can I change the e-mail adress
that these emails are coming from?
Thanks alot.

Tanuj,
Were you able to achieve this. The SM:EXEC SERVICES job and the SCOT job are currently run by user ID: XYZ and the the EWA
is set up by the user ID XYZ.
I changed the following:
Deleted SM:EXEC SERVICES and the SCOT job and recreated them to be run by user ID ABC (the one I want to change to).
It still uses XYZ as the sender (not ABC) because as the configuration is set up by user XYZ, it is creating SM:EXEC SERVICES
on the fly to be run by user ID XYZ.
Please let me know what I am missing. What else need to be changed ? Thanks.
Ravi

EWA Report with yellow rating and NO data

Hi,
We have upgraded the solution manager to EHP1 in June. Befor that my EWA was working perfectly fine.
Our EWA report (after upgrade) is getting generated and has a rating yellow but it contains No data.......shows data oly for hardware capacity even no other performance factors included in the report.
I checked settings in satellite system as well as in solution manager. everthing is working fine. All RFCs, service defination, word setting everthing is fine.
I need your assistance to resolve this issue o priority as its EWA for PRD isnt getting generated.
Thanks,
SAP Basis

my ewa contains:-
1.2 J2EE Configuration Data
1.2.1 Support Package Maintenance
No configuration data was found.
Recommendation:
Check whether data is displayed for this system in application 'Change Reporting', which can be found in the 'Root Cause Analysis' work center under 'System Analysis'.
The requirements for 'Change reporting' are:
- Setup of Diagnostics
- Setup wizard for this system has been executed successfully
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
2 Java Performance Data PI1
2.1 Java Application Performance
No performance data was found.
Recommendation:
Check whether data is displayed for this system in application 'Workload Analysis', which can be found in the 'Root Cause Analysis' work center under 'End To End Analysis'. If the data is not available here, open a message on component SV-SMG-DIA.
If data can be displayed in the Workload Analysis but is missing here, open a message on SV-SMG-SER.
The requirements for the 'Workload Analysis' are:
- Setup of Diagnostics including BI
- Setup wizard for this system has been executed successfully
- Agents have been set up and are running
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
please suggest

Enterprise Portal EWA Report

Hi,
I would like to know the reason why the JCO part is not included after the extraction of EWA Report on Solution Manager? What could be the reason behind this? What are the possible solutions to eliminate this type of issue? The customer actually is complaining about their Enterprise Portal EWA Report because the JCO part is not included on it. I need your expert advice on this.
Regards,

checkout the attachment of SAP Note 976054, it contains a troubleshooting section

XML parser to parse XML inside HTML file

Hi,
I wish to know is there any other parsers apart from JAXP to parse xml content present inside HTML file. For example,
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
</head>
<body>
<form id="j_id_jsp_1394907664_1" name="j_id_jsp_1394907664_1" method="post" action="/msaiphoneportal1.1c/pages/xmlchech.faces;jsessionid=5666F0E1CF0E44B978940F021012AA41" enctype="application/x-www-form-urlencoded">
<input type="hidden" name="j_id_jsp_1394907664_1" value="j_id_jsp_1394907664_1" />
<?xml version="1.0" encoding="UTF-8"?>
<hospital>
<Users>
<User id="1" password="x" type="staff" username="x"/>
<User id="2" password="y" type="staff" username="y"/>
<User id="3" password="z" type="staff" username="z"/>
</Users>
<Survey/>
<Patients>staaatus</Patients>
</hospital>
<input type="hidden" name="j_id_jsp_1394907664_1:j_id_jsp_1394907664_2" /><input type="hidden" name="javax.faces.ViewState" id="javax.faces.ViewState" value="-4298162632826268059:-1507671971163298623" autocomplete="off" />
</form>
</body>
</html>
I need to read the XML content inside. Is there any way please let me know
Edited by: DHURAI on Jul 22, 2010 12:59 AM

DHURAI wrote:
while reading, we can fetch the starting of XML through <?xml> tag, but how we know the ending of the XML as it seems to be dynamic.1) Extract the document root element which follows the <?xml ... ?>
2) From this root element , construct the associated root element terminal by inserting a / after the <.
3) Search for the terminal.
If the root name can also be the name of an enclosed element then you will have to count the number of terminals.

Branding inside html ewa reports

Similar Messages

Maybe you are looking for