Brandnew 8-core MacPro and ATI Radeon X1900 xt

I had this quadcore MacPro with an ATI Radeon X1900 XT and now I am switching to a newer octo-core MacPro.
I managed to install the card into the computer case. But alas, i don't see anything on my screen...
System Profiler discovers the card but gives it an generic name "Display" with Vendor ATI and DeviceID 0x7249.
But no "displays" found attached to it, which is b.s.
Please please don't tell me i cannot use this graphics card in the octo-core MacPro?!

I am surprised .... I don't have (any ideas), so I don't know for sure
You know, that doesn't help or further things and puts out false ideas that there even might. Then I'll hear "but I read somewhere something."
Apple changed the firmware on 2008. That is well known and pretty obvious, and graphic cards have to follow suit.
Nvidia doesn't seem to know or follow ATI's path of using a "hybred" (for want of better term) EFD? ROM that works across EFI32 and EFI64. Been explained over and over, or if not explained, given as cause to why.
At least we have a few years before EFI128!
NVidia GeForce 7400 gfx card
Now that is very elusive.
The 7300GT works only in 2006-7 Mac Pro, which were dual processor / dual or quad-core, but all used EFI32; 667MHz FBDIMM; had 1333MHz front side bus; PCIe 1.0/1.1 (but not PCIe 2.0 that came out in 2008).
And with brand new 2009, DDR3, you graphic option is really between GTX 285 and ATI HD 4870 - forget the GT120 even as a viable option for most.

Similar Messages

Avid and ati radeon x1900

hello, i was wondering if anyone out there has a macpro with a ati radeon x1900 graphiccard running avid. i am not sure if i should buy the radeon card, i think im just scared to make the commitment, afraid the card will not work with my avid. i would appreciate any help...
thanks

I am surprised .... I don't have (any ideas), so I don't know for sure
You know, that doesn't help or further things and puts out false ideas that there even might. Then I'll hear "but I read somewhere something."
Apple changed the firmware on 2008. That is well known and pretty obvious, and graphic cards have to follow suit.
Nvidia doesn't seem to know or follow ATI's path of using a "hybred" (for want of better term) EFD? ROM that works across EFI32 and EFI64. Been explained over and over, or if not explained, given as cause to why.
At least we have a few years before EFI128!
NVidia GeForce 7400 gfx card
Now that is very elusive.
The 7300GT works only in 2006-7 Mac Pro, which were dual processor / dual or quad-core, but all used EFI32; 667MHz FBDIMM; had 1333MHz front side bus; PCIe 1.0/1.1 (but not PCIe 2.0 that came out in 2008).
And with brand new 2009, DDR3, you graphic option is really between GTX 285 and ATI HD 4870 - forget the GT120 even as a viable option for most.

Nvidia GeForce 7300 GT and ATI Radeon X1900 XT

I have a Mac Pro 2,1 running 10.6.1 and BootCamp.
I had a Nvidia GeForce 7300 GT video card in it and it ran well under BootCamp.
I installed a ATI Radeon X1900 XT.
Under BootCamp the 2 cards seem incompatible, with an error message that the driver on the Nvidia card has been disables due to an incompatibility with the other card.
Is there a solution for this?
If I wanted 2 cards inside would they both need to be the ATI's or Nvidia's?
Thanks

Hi I would maybe get a Apple Upgrade Kit the GT 120 is 512MB's & dose not use all 16 lanes as it like to make you think & will work on 2006 Mac Pro's at $149.00 I would say if you just want more displays get two & eBay your old cards. Please know if you game you will want more power but if only for more displays this 1 slot card is great.
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
View all Questions
It as well as the much better 4870 both work with the Mac Pro 1,1 & 2,1
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
The NVIDIA GeForce GT 120 includes 512MB of GDDR3 memory, uses the PCI Express 2.0 interface, and includes one Mini DisplayPort and one dual-link DVI port.
Learn more Questions & Answers
2 Questions + 2 Answers
Based on 11 reviews
Write a review
$149.00
Ships: Within 24hrs
Free Shipping
Overview
The NVIDIA GeForce GT 120 with 512 MB of GDDR3 memory delivers excellent all-around performance whether your playing games or dealing with creative and scientific applications. With up to four NVIDIA GeForce GT 120 graphics cards installed, a Mac Pro can support up to eight displays simultaneously.
NVIDIA GeForce GT 120 includes two video ports: one Mini DisplayPort and one dual-link DVI port. This allows you to connect both the 24-inch Apple LED Cinema Display or another Mini DisplayPort-based display, and a DVI-based display such as the 30-inch Apple Cinema HD Display. Display adapters are available to connect VGA displays.
Good Luck man
Thomas

Mac Pro Early (2008) and ATI Radeon X1900 XT

Hey, I recently got the new Mac Pro (2008), and wanted to put my old ATI Radeon X1900 XT in my new machine, however when i put it in the extra wide x16 PCIe 2.0 slot, secured it and fired up my machine, the screen remained black and the fans went constantly on full speed, i swapped over the DVI to the other graphics card, ATI Radeon HD 2600 in slot 2. In system profiler it didn't recognise the X1900 XT.
According to the apple site, a PCIe 1.1 card can be put in a 2.0 slot and vice versa, so im not quite sure why its not working!
Any help or suggestions would be much appreciated .
Chris

It appears that you can run the 1900 xt in the new Mac Pro early 2008. Rob Morgan has benchmarked the results. Apparently it works well in gaming, however, it does not offer all that much over the stock 2600 xt for Motion performance. With Motion the 1900 XT was only a few seconds faster than 2600 XT. Good luck.
Go to http://www.barefeats.com/quick.html

ATI Radeon X1900 XT only for MacPro?

I Just noticed this this morning at Apple's Online Store ( US )
"ATI Radeon X1900 XT Graphics Upgrade Kit US$ 399.00"
I wonder if this will work in the G5 with Dual Cores ( and Quad ) PCIe ?

Ok thanks Jewell, What a Bugger eh?
X800XT for PCI-X G5's and ATI Radeon X1900 XT for MacPro's and nothing for the PCI-E last generation G5's! (unless you BTO).
I have seen your posts here about the lack of video card upgrades for the Quad, and I feel for you ... it's got to be exasperating !!
It will not unfortunately. Its to do with the way
video cards are recognised by the host system and the
x1900 is for MacPro only.
However.
Joe Schorr has confirmed in these forums that ATI
will be releasing a dual-core G5 edition of the x1900
(?) card which would finally make this Apple's first
video upgrade card since the dual-core G5 (quads)
were launched in October 05. Way to go Apple...
I read your repost of it.
-Robert

Photoshop CS3 and ATI Radeon 2600XT Graphics ERRORS

I am Running photoshop CS3 on a mac pro 2.8GHz 8-core with and ATI Radeon 2600XT graphics card. On any size file, from a small jpeg to an enormous tif, any time I pan around the image, the monitor will repeat a section of the image over and over to fill the screen. That is to say, panning vertically will fill the screen with copies of a random horizontal section of the image (20pixels wide or so). The effect goes away as soon as I perform another action that affects the entire image (zoom, action undo, create new layer, etc.). I have updated photoshop and osx with all available software and firmware updates.
An example of what this looks like: http://www.flickr.com/photos/26107441@N02/2450960322/

I am running the same Mac hardware with a Mitsubishi 2060u, 1600x1200, 85Hz (CRT). I am having no such issues with PS CS3. I tried the monitor at 60Hz as well which also worked fine.
Do you have all the latest updates installed including the 2600 firmware update?
-Keith

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Can I put two ATI Radeon X1900 XT's into a MacPro?

Hi
We've just bought a MacPro, with 3 NVIDEA 7300 cards. Sadly it seems the 7300 does not support the apple DVI-Video adapter. Our system requires three dual link DVI ports supporting the adapter, so on face value we should be able achieve this by removing the 7300's and installing two ATI Radeon X1900 XT's instead.
The question is is it possible to put two ATI Radeon X1900 XT's into a MacPro? Has any one done this? or indeed does anyone know how to get the 7300's to recognize a DVPAL device such as video projector or analogue video monitor?
Cheers
Nick
MacPro Mac OS X (10.4.8)

PCI-E (Peripheral Component Interconnect-Express) is a newer implementation of PCI which uses a much faster physical-layer communications protocol than older PCI bus architectures.
Rather than using a bus as PCI did, PCI-E uses dedicated, unidirectional, point-to-point connections known as "lanes" to communicate with PCI-E devices.
The Mac Pro features four PCI-E 16-"lane" connectors on the main logic board. In PCI-E, these are known as "x16" slots. These can be used for PCI-E-compatible cards, like the ATI Radeon card that is available as a configure-to-order option in the Mac Pro.
PCI-E cards will work in slots that are at least as large as the card is. This means that the "x16" slots in the Mac Pro computer also supports "x1" and "x4" cards as well. However, all four slots cannot simultaneously support four cards that implement the same lane configuration. Only one slot actually has 16 lanes going to it—you can put a x16 card into a slot that is only using one lane and it will operate properly, but it will operate more slowly than the same card in a x4, x8 or x16 slot.
The Expansion Slot Utility, located in /System/Library/Core Services, allows you to configure the PCI-E expansion slots and how many lanes each slot will support, as illustrated below. This example shows a "x16" graphics card occupying the first slot, and the other slots are configured to support an "x1" card in slot two and "x4" cards in slots three and four. The example shows the other options available. When you have picked the appropriate configuration of slots to support your compliment of PCI-E cards, click the Save and Restart... button to implement the configuration.
http://docs.info.apple.com/article.html?artnum=304122
Michael

ATI Radeon X1900 worth it for only FCP and Color?

Hello,
I've been looking around these posts for a while and I can't seem to find this specific answer, so I apologize if my question has been asked already.
I am looking to purchase a MacPro tower. I don't use Motion. I don't play video games. I don't need 8 zillion giant monitors. I intend to use the computer mainly for Final Cut Pro 6.0 and probably a fair amount of Color as well.
With this being the case, what are the benefits of the
ATI Radeon X1900 XT 512MB Graphics Card, over the
NVIDIA GeForce 7300 GT 256MB Graphics Card? Is it really worth the money? I've seen some posts that say you won't see a difference in FCP, but is this also true for Color? And if so, what exactly will the difference be?
Thanks,

Here's what they said at the Color board...
With anything less than an ATI x1900...you may experience issues such as lack of realtime playback, missing support for 10-bit images and 2K frame sizes, no float support for your grade settings.
For this version of Color, ATI is the way to go. I wouldn't go so far as to say an Nvidia card gives you a crippled version of the program, but it's close.
http://discussions.apple.com/thread.jspa?messageID=4611284&#4611284
http://discussions.apple.com/thread.jspa?messageID=4672792&#4672792
http://discussions.apple.com/thread.jspa?messageID=4620097&#4620097

Signal Problem MacPro 1.1 w/ATI Radeon X1900 XT

Before I run out an purchase a new video card wanted to run my issue by the forum. I have a MacPro 1.1 (early 2007) with a ATI Radeon X1900 XT card. When booting up recently my screen is blank, no signal. If I switch video ports it fires up.
Is this a video card issue or something else with the OS (running Mac OS X 10.6.6 (10J567))?
Would appreciate a little insight from the forum.
Thanks,
Koyangie

1. There was a replacement program that ended 1/31/2011 for some X1900
2. Any owner by know should have known and been doing a good deep cleaning for dust, and upping the system fans a tiny notch (900 rpm is quiet but more efficient) to keep more air circulating
3. While you can't directly measure GPU temps, you can with other sensors
4. Do you hear the video card fans or system fans working hard?
Poor design with the cooling chamber on X1900 made it a dust magnet and headache.

Television and TV Recording with a ATI Radeon X1900 XT 512MB equip Mac Pro

I have been looking into a Mac Pro 2.66-3.0 Dual-core equipped with a ATI Radeon X1900 XT 512MB. One of the things I would like to accomplish is to also use the thing as a television and TV recorder (reliably). I have experience with the a PC equiped with a ATI9700pro all in wonder. I had nothing but problems with the software with hours (weeks) spent trying solve the issues. Turns out this is not an unusual thing with the ATI-Allinwonder. Thought I would check here to see whether anyone has input on how the x1900 works on the mac pro esp as a tv device.

the elgato system is an external tv tuner that connects by USB. It has nothing to do with the graphics card in your mac.
you can connect an antenna, cable, s-video or composite. Some of the models accomodate HDtv now.
the results are clean, and i've had no problems.

ATI Radeon X1900 XT driver for MacPro

I put an ATI Radeon X1900 XT for MacPro in my 2 x 3 GHz MacPro. It displays only 1280 x 800 on my 30" Cinema. Do I need to install a driver, and if so, where to get the driver since card did not come with CD and AMD site has not posted a driver?
2 x 3 GHz MacPro Mac OS X (10.4.8)

zspike --
You don't need drivers -- they're built in to the OS. However, it would be nice to use the ATi displays panel, so you can turn on various app-specific speed settings and features like full-screen antialiasing.
Now, version 4.5.9 of ATi Displays is a Universal Binary, but ATi in their infinite wisdom have made it so that it WILL NOT install on a Mac Pro, only a G5.
But there's a way around this:
http://forum.macbidouille.com/index.php?showtopic=199963
Have a look at post No. 8. Simply put the displays.app in your /Applications/Utilities folder, and run it from there. Runs no problem. I couldn't get the Prefs Pane to work, but all that does is launch the Displays.app
Have fun!

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

ATI Radeon X1900 XT and Color

Hi Guys,
sorry to post this here but couldn't think where else to ask this. Looking at the recommended specs for the Final Cut Studio 2 and especially Color. The recommended card is the ATI Radeon X1900 XT, what is it about this card that Apple recomend it so highly?
The reason I ask is because I've seen a great card that had 320GB VRAM but hope it works with color and motion 3
What do you guys think?
James
Dual 2.3Ghz PowerMac G5, 1.5 Ghz Powerbook G4 Mac OS X (10.4.6)

umm, i was advised while on a color demo pod at NAB with the writer of the product manual that the 1900 card is the sweet spot there. that's all the guidance i need. use what you want at your own risk.

After Effects 7 with ATI Radeon X1900 XT

Hi everyone,
I use Adobe After Effects 7 a lot and I'm not happy with my current machine (PowerPC G5 2x1.8GHZ, 2GB DDR SDRAM, ATI Radeon X800 XT), it is too slow to work smoothly when I have several layers and effects going on. Previewing the work on the timeline (OpenGL or Adaptative resolution) is painfully slow and takes on my nerves. I believe this is mainly due to my graphics card, and the fact is not 100% compatible with OpenGL on After effects.
I'm ready to upgrade with a Mac Pro 2.66 GHz Quad Xeon with ATI Radeon X1900 XT, but only if I'm going to enjoy a real improve with After Effects 7, as this is my main editing application right now.
Does anybody have experience with this configuration?
Thanks in advance for reading and replies!
PowerPC G5 2x1.8GHZ Mac OS X (10.4.7) 2GB DDR SDRAM, ATI Radeon X800 XT

I have this configuration, but sadly have had no time to play around with After Effects. AE's realtime playback capabilities are limited (especially when compared with something like Motion), so you're probably still going to be rendering to RAM a lot. I believe the OpenGL support is for things like anti-aliasing, blur, and blending modes -- so a faster video card may not automatically equal huge performance boost across the board. Four Xeon cores and a lot of RAM will help it a lot more (see exception below).
Also, AE 7 still has to run under Rosetta which results in a slower performance than if it was native. Also, be aware that there is a limit placed on all Rosetta processes that do not allow them to address more than 1.5GB of RAM combined. This will most likely limit your render speed and preview lengths. See this thread on Adobe's forums for more info:
http://www.creativecow.net/articles/jonesgraham/AE7_on_IntelMacPro/index.html
EDIT: The above link was to the performance comparisons, but not the original Adobe forum thread. Here it is:
http://www.adobeforums.com/cgi-bin/webx/.3bc2401b
However, if you read the thread, and follow the link in it, the author is seeing huge performance gains with AE7 on his MacPro 3GBs over his old dual G5 4.5GBs.
So most likely, you'll see a performance benefit from upgrading. And when an Intel native version of AE ships, things will really fly.

Brandnew 8-core MacPro and ATI Radeon X1900 xt

Similar Messages

Maybe you are looking for