Bravo Pro2 Disc Duplicator and Discribe 5.3.9-locks up.

Im trying to burn CD's and this Dupicator works great when it works but, burning at max speed it has allot of rejects, allot.
I inquiring on the later version of the software for my Tiger OS 10.4.6.
I have attached the USB directly to my Dual 1.8 G5 and this duplicator is very
buggy.
Im getting after about 6-8 disc out of 200 needed a error message that locks up the whole process.
I noticed if I burn at 12 or 8X speed it works allot better actually finishing disc's.
There is a few settings not mentioned in the instructions that I dont understand its function:
1. Using Burn-Proof/Justlink-Do I want this, who knows-
2. Cache Entire Disc to Ram before writing? Not sure what this setting does.
3. Open Next Session? Not sure what that setting is.

Three thoughts come to mind:
abrody already mentioned the media. For a long time Apple only supported DVD-R- while in the PC world, DVD-R+ seemed to be more prevalent. Check the burnt DVDs to see if they are marked R- or R+
If any of the problem discs are music CDs they might have been burnt at a high speed. This is one issue that has me flummoxed. A few years ago I'd burn music CDs that would work in my car but not always in my wife's car. I tried all kinds of things and finally hit on burn speed. Burning music discs at a slower speed reliably made CDs my wife could use. Why a high speed burn creates a disc that some drives could read but others cannot is beyond me.
finally, verify that the issue isn't involving just burnt discs. Try a selection of commercial discs too. If any of them fail it would tend to indicate a hardware failure on the mini

Similar Messages

  • Photos being duplicated and rearranged

    There are two issues I've been having with iWeb in regards to photos. The first is that whenever I make a slideshow it looks fine in iWeb, and it even works when I open up the index.html file in Safari, but it doesn't work when I actually upload my site to my host server.
    So, since I couldn't get the slideshow to work, I decided to just build a more stripped down photo gallery. All it is is a bunch of images on an otherwise blank page, nothing fancy. Again, it looks fine in iWeb and in Safari, but as soon as I upload it to my host server it ends up rearranging and duplicating images so that not all of my images are there, and some of them are in places they definitely shouldn't be.
    I'm using iWeb 08, and I use Fetch to upload my pages to a GeoCities website.
    This is my website:
    http://darkfan.com/PhotoGallery.html
    As you can see near the bottom, one photo is duplicated and two are missing and have been replaced with images I created for the "photo gallery" and "home" links.
    Any and all help will be greatly appreciated. Thanks!

    Many people have fixed this by connecting their phone, then disconnecting it and re-connecting it again. Odd I know, but they report it works.

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

    I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

    UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
    So I am just even more confused now.

  • My buddy tried to help me install windows 8 on my new mac book and all he did was put the disc in and now it will not come out and my mac book will not turn off

    I cannot get the windows 8 disc out of my mac book pro

    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • Bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

    bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

    You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X.  To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.

  • Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

    Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

    Are you in DSL? Do you know if your modem is bridged?
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • I had a hard disc failure and had to reload Design suite 6 from disc.  The program is now telling me I have 7 days to register the product or it will quit working.  The serial number is already registered.  It won't connect to the adobe site from the popu

    I had a hard disc failure and had to reload Design suite 6 from disc.  The program is now telling me I have 7 days to register the product or it will quit working.  The serial number is already registered.  It won't connect to the adobe site from the popup screen that comes up telling me I only have 7 days to register.  What do I do?

    Go to the Help menu in Photoshop and choose Activate. It should open a wizard allowing you to do this.
    If that fails, Contact Customer Care after clicking on one of the activation links. The more information you give them, the easier it will be for them to help you.
    Gene

  • I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

    I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
    It might be a huge coincidence but the drive was working fine before i installed lion?

    Installing Lion would not cause the superdrive to stop working.  Are you unsure as to whether or no a cd/dvd is inside?  Something may be broken inside and you should consider bringing it in for service.

  • I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?

    I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?

    LOL.. don't switch off the TC.. this is fairly typical behaviour..
    Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
    Are you running latest firmware for your TC?
    What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
    Get one bigger USB hard disk instead of 3 smaller ones.

  • What are the disc space and memory requirements for the apps?

    What are the disc-space and memory requirements to run the apps

    Hello John!
    thank you for the info. However, as I have only 1Gb memory and a 32Gb
    solid-state disc, I think that I will stay with Acrobate.com for a while
    longer.
    Regards
    Brianb

  • When compacting, I get an alert that asks me to verify that I enough disc space and that I have write privalages to the file system. How do I do this?

    Mozilla asks me if I want to compact, I click 'yes' and after a while I get this:
    Alert
    The folder 'inbox' could not be compacted because writing to folder failed.Verify that you have enough disc space, and that you have write privileges to the file system, then try again.
    I have no idea what to do know. Please can someone help me?

    Try restarting your computer in windows safe mode. Links to Instructions here http://thunderbirdtweaks.blogspot.com.au/2014/02/basic-troubleshooting-for-thunderbird.html
    See if compacting will work them

  • Hello I just bought the usb super drive and for some reason when I put the disc in and download the application it won't show.Just a bunch of words will show up.

    Hello I just bought the USB super drive for the mac book pro and for some reason when I put the disc in and I download the content and for some reason when I put the aplication just a bunch of random words come out,not the content the disc brings.

    Ok, I hope I'm not steering you in the wrong direction, but I've just found this on the support site for the software.
    Interchange Interactive Whiteboard Software System Requirements
    Please note: These discs work on Windows PCs only.
    Minimum System Requirements
    Pentium II 300 MHz processor
    Windows 98 / ME / 2000 / XP / Vista
    64 MB RAM
    50 MB free disk space if not installing onto hard disk
    1.44 GB free disk space if installing (recommended)
    4x CD-ROM drive
    800 x 600 screen resolution displaying 16-bit color
    Sound Blaster compatible sound card
    Mouse or other pointing device
    Headphones or speakers

  • Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
    Allan

  • Error message during installation of Lion..."The disc is not formatted for mac os extended (journaled).  But it is according to disc utility and won't finish installing.

    I go to disc utility and verify and repair disc permissions.  Doesn't work.  I try to enable journalling but it isn't highlighted and am not able to do that as well. 

    I meet all those requirements.  core 2 duo and latest snow leopard.  I have a late 2006 mac book.  Maybe that's why.  Its telling me that my hard drive isn't formatted correctly but it is formatted as they ask.  It's not the hard drive that came with the macbook though. 

Maybe you are looking for