BRBackup error on DEV & QA

Dear all ,
AIX , Oracle ,
We are using 4 tapes for Online back (DEV and QA servers).
2 ---> DEV
2----> QA.
Last week i have taken backup successfully on both servers.
This week i got below error on both the servers.
BR0355I from /dev/rmt3.1 ...
BR0278E Command output of 'LANG=C cd /oracle/IRQ/sapbackup && /usr/sap/IRQ/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1':
#cpio: End of tape. Load next tape
If you want to go on, type device/file name when ready
/dev/tty: No such device or address
BR0280I BRBACKUP time stamp: 2010-09-17 16.54.34
BR0279E Return code from 'LANG=C cd /oracle/IRQ/sapbackup && /usr/sap/IRQ/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1': 2
BR0359E Restore of /oracle/IRQ/sapbackup/.tape.hdr0 from /dev/rmt3.1 failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt3.1 failed
BR0236I Perhaps volume initialization with option '-i force' required
BR0056I End of database backup: beedjhih.ant 2010-09-17 16.54.34
BR0280I BRBACKUP time stamp: 2010-09-17 16.54.34
BR0054I BRBACKUP terminated with errors
Kindly advise

hi Dear,
BR0218E Checking label on volume in device /dev/rmt3.1 failed
first you have to initialize your tape before take backup
brbackup -i -v TSTB01
(TST is SID)
also check following
Note 948294 - AIX JFS2 mount options to use with Oracle 10g
BR0261E BRBACKUP cancelled by signal 15- Error in Archivelog backup to tape
Regards,

Similar Messages

BRBACKUP error on DEV server

Dear all ,
i got error while i am taking backup , pls check the below logs .
BR0278I Command output of '/usr/sap/IRD/SYS/exe/run/backint -u IRD -f backup -i /oracle/IRD/sapbackup/.bedyatsq.lst -t file_online -p /oracle/IRD/102_64/dbs/initIRD.utl -c':
                         Data Protection for SAP(R)
             Interface between BR*Tools and Tivoli Storage Manager
             - Version 5, Release 5, Modification 0.2 for AIX LF 64-bit -
                   Build: 316K compiled on Jun 3 2008
        (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
BKI5014E: Tivoli Storage Manager Error:
ANS1087E (RC106) Access to the specified file or directory is denied
BKI0405I: TDP waited 0 sec. for BRBACKUP in util_file_online communication.
BKI0020I: End of program at: Fri Aug 20 12:36:27 IST 2010 .
BKI0021I: Elapsed time: 01 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2010-08-20 12.36.27
BR0279E Return code from '/usr/sap/IRD/SYS/exe/run/backint -u IRD -f backup -i /oracle/IRD/sapbackup/.bedyatsq.lst -t file_online -p /oracle/IRD/102_64/dbs/initIRD.utl -c': 2
BR0232E 0 of 41 files saved by backup utility
BR0280I BRBACKUP time stamp: 2010-08-20 12.36.27
BR0231E Backup utility call failed
BR0056I End of database backup: bedyatsq.anf 2010-08-20 12.36.27
BR0280I BRBACKUP time stamp: 2010-08-20 12.36.29
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2010-08-20 12.36.29
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20100820123624 -c force -p initIRD.sap -cds'
BR0280I BRBACKUP time stamp: 2010-08-20 12.36.29
BR0292I Execution of BRARCHIVE finished with return code 5
Kindly suggest

Hello Satheesh,
http://publib.boulder.ibm.com/infocenter/tivihelp/v1r1/index.jsp?topic=/com.ibm.itsmm.doc_5.3.3/update/ANS1087E.htm
Mostly these errors are caused by permission problems on the tdpo / tsm log file. You need to run tdpoconf as root and the corresponding log files are created with root permissions only. Just delete these log files or change the permissions of these log files (check your dsm.sys configuration file) and it should work.
Regards
Stefan

BRBACKUP error on DEV - Tivoli

Dear all,
We got error on Online backup .
pls check the below log .
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/IRD/SYS/exe/run/backint -u IRD -f backup -i /oracle/IRD/sapbackup/.beejfoth.lst -t file_online -p /oracle/IRD/102_64/dbs/initIRDweekly.utl -c':
                         Data Protection for SAP(R)
             Interface between BR*Tools and Tivoli Storage Manager
             - Version 5, Release 5, Modification 0.0 for AIX LF 64-bit -
                   Build: 316B compiled on Oct 23 2007
        (c) Copyright IBM Corporation, 1996, 2007, All Rights Reserved.
BKI5014E: Tivoli Storage Manager Error:
ANS1087E (RC106) Access to the specified file or directory is denied
BKI0405I: TDP waited 0 sec. for BRBACKUP in util_file_online communication.
BKI0020I: End of program at: Mon Oct 18 16:23:59 IST 2010 .
BKI0021I: Elapsed time: 00 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2010-10-18 16.23.59
BR0279E Return code from '/usr/sap/IRD/SYS/exe/run/backint -u IRD -f backup -i /oracle/IRD/sapbackup/.beejfoth.lst -t file_online -p /oracle/IRD/102_64/dbs/initIRDweekly.utl -c': 2
BR0232E 0 of 41 files saved by backup utility
BR0280I BRBACKUP time stamp: 2010-10-18 16.23.59
BR0231E Backup utility call failed
BR0056I End of database backup: beejfoth.anf 2010-10-18 16.23.59
BR0280I BRBACKUP time stamp: 2010-10-18 16.24.01
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2010-10-18 16.24.01
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20101018162356 -c force -p initIRDweekly.sap -cds'
BR0280I BRBACKUP time stamp: 2010-10-18 16.24.03
BR0292I Execution of BRARCHIVE finished with return code 5
Regards

Hi,
tsm stores version and tsm client password info in initSID.bki in addition to TSM.PWD.
If you use "password_access=generate" it requires to update the
password for the nodename in charge as well and this needs to be done in TSM.PWD (!).
TSM.PWD needs to get root:dba and 660 permission to make backint able to update the password
in TSM.PWD when "password_access=generate" is configured.
I think it is better to configure a seperate node in dsm.sys to do the DB backups and
configure a special TSM.PWD in $ORACLE_HOME/dbs/TSM.PWD.
This way users of group dba are not able to steal away a TSM.PWD for i.e. the rootfs backup.
Tipp does not apply if you are on AIX with "password_access=prompt".
Hope this helps
Volker

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

Error: getting dev info for Tape - unrecoverable error

Hi,
I have configured a Oracle Secure Backup version 10.4.0.1.0_LINUX64.
It was working corretly until yesteday that i can't mount the tape because this error appears:
Error: getting dev info for Tape - unrecoverable error
I run this command with obtool:
ob> lsdev -lvg
***0 wst__set_mode: bus 0, target 0, lun 0: IBM,ULTRIUM-HH4,B6W1
***0 wst__get_sn: code=0x0
***0 wst__info: infolen=0xd8, info=0x7fff007bf050
***0 wst__dev_state...
***0 wst__exec: op=0 (nop), buf=0x0, count=1 (0x1), parm=0x0
ioctl_op=0x3, to=300, datalen=0x0, buf=0x0
cdb: 00 00 00 00 00 00 tur
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 0, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__exec: op=7 (readpos), buf=0x7fff007bee60, count=20 (0x14), parm=0x0
ioctl_op=0x5, to=180, datalen=0x14, buf=0xd1e2fc8
cdb: 34 00 00 00 00 00 00 00 00 00 read_pos
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 34, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__dev_state: code=0x20008111
***0 wst__info: code=0x20008111
Error: getting dev info for Tape1 - unrecoverable error
***0 wst__conn_type returning 1 (code 0x0)
***0 wst__close: wh=0x0
Tape1:
Device type: tape
Model: [none]
Serial number: 1068037161
In service: yes
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: yes
Blocking factor: (default)
Max blocking factor: (default)
UUID: c60554ca-0562-1030-8cdb-d4ae528eb115
Attachment 1:
Host: bosmgmt.bos.local
Raw device: /dev/sg3
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-HH4
Firmware: B6W1
Serial number: 1068037161
Hardware compression: not available
Hardware encryption: not available
Thanks in advance

It's reporting a hardware media error on the drive. Basically you've got a hardware fault.
Thanks
Rich

[linux-3.2] watchdog: error registering /dev/watchdog

Today, kmod replaced module-init-tools, and after upgrading my system, noticed this error after udev loaded:
Jan 6 07:44:41 localhost kernel: [ 4.528051] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
Jan 6 07:44:41 localhost kernel: [ 4.528088] watchdog: error registering /dev/watchdog (err=-16).
Jan 6 07:44:41 localhost kernel: [ 4.528113] mei: unable to register watchdog device.
Thankfully, nothing else happened and my system didn't go kaput. But reading the manpage, watchdog does appear to be important. Since udev errors were expected with the kmod upgrade, and this error never occurred before today (checked my /var/log/everything.log), it appears kmod is the likely culprit.
Edit: Tried posting this to the ML, and discovered that the general public does not have write access to the ML. So if some developer thinks this is important, hopefully that person will see this post.
Last edited by Sara (2012-01-09 00:12:41)

I finally found some time to dig in the kernel source a bit and found that I was wrong. Sorry for the confusion. There's nothing wrong with the Intel MEI watchdog driver and the softdog is not involved at all. The truth is that the watchdog core functions only support 1 watchdog device via /dev/watchdog [1]. If the iTCO_wdt driver would use the watchdog core [2], we'd get the correct "only one watchdog can use /dev/watchdog." message and the IMEI watchdog registration would not be attempted. But it doesn't. It registers in a different way [3] and so the core does not "know" about another watchdog being already registered, attempts to register the IMEI watchdog and fails with the confusing "cannot register miscdev..." message.
The bottom line is that the kernel supports only one watchdog and we (administrators) have to decide which device we want to use.
[1] http://lxr.linux.no/linux+v3.2/drivers/ … dev.c#L344
[2] http://lxr.linux.no/linux+v3.2/drivers/ … dog_core.c
[3] http://lxr.linux.no/linux+v3.2/drivers/ … wdt.c#L854
Last edited by laloch (2012-01-08 15:34:41)

Virtual Box error: error mounting /dev/sda1 on /mnt

Hello folks,
After getting fed up with Ubuntu's bloated setup, I was trying to switch to Arch linux. But before that I wanted to try it in Virtual Box. I was using Arch Linux Core image for this. But after setting up file system and mountpoint I am getting this error:
error mounting /dev/sda1 on /mnt
The steps I followed:
1. Source: Core local
2. Editor: Nano
3. Clock: As usual
4. Prepare hard drive:
a) Manually Partition (as this is what I will be doing during actual installation)
b) /dev/sda
c) New partition on all space available on virtual machine, making it primary, bootable, Type: Linux Extended (option 85).
d) Write partition and Quit and Done
5. Manually configure block device, filesystems and mountpoints.
a) dev
b) Do not recreate file system.
c) Set ext4 format and mount point, ignoring swap space or seperate /boot partition.
d) Now when I goto next step as Done, It gives an error : Error mounting /dev/sda1 on /mnt/.
Is there any problem with creating the filesystem as I have done? Can anyone shed some light if there is any particular configuration needed for virtual machine. I searched the forum for other options. But none of them seem applicable for me.
Thank you for your time.

What host os and CPU are you using? The message states that you need virtualization hardware support in the CPU (Intel VT-x or AMD-V) in order to run that 64 bit guets OS. Reasons for this error (that I could think of) could be:
- you have a very old cpu
- you have disabled virtualization in your bios
- you are running a 32-bit host os
These links to the docs may also help
https://www.virtualbox.org/manual/ch10.html#hwvirt
https://www.virtualbox.org/manual/ch03.html#intro-64bitguests
cheers
bjoern

ERROR: Device '/dev/sda3' not found.

This is my first time compiling a custom kernel. I am trying to compile zen kernel 3.12.3. Whenever I try to boot it up, it says this:
ERROR: device '/dev/sda3' not found. Skipping fsck
ERROR: Unable to find root device '/dev/sda3'
Then it drops me to a recovery shell. When I look at the contents of '/dev' none of my partitions are found on sda. '/dev/sda' is listed but nothing else. Has anybody else had this problem? /i have read various fixes but none of them have helped.
Sorry this is my first post.
Thanks in advance.

Well, the whole point of the initramfs is to have it load the necessary modules to mount the rootfs. So if mkinitpcio complains that there are no modules to put in there, that is pretty problematic.
I think you should take a look at the PKGBUILD for the official Arch kernel. It includes a few lines that allow you to use menuconfig or nconfig or whatever, prior to that actual 'make'. I think that any time you install things to your system, you should probably be leveraging the package manager in order to properly track the files. This is particularly true when you are an Arch user and the creation of packages is so damn easy.

Backup error finished with error on DEV Server

Dear all ,
Online backup finished with error . pls check the below logs .
BRBACKUP Show action/Deatils :
BR0018I Waiting for the next offline redo log file...
BR0056I End of database backup: bedtrieb.ant 2010-07-28 11.27.20
BR0280I BRBACKUP time stamp: 2010-07-28 11.27.20
BR0052I BRBACKUP completed successfully
BR0280I BRBACKUP time stamp: 2010-07-28 11.27.20
BR0291I BRARCHIVE (action ID aedtrieb) will be started with options '+bedtrieb.ant,154235420672,IRDB01,41:749782 -jid ALLOG20100728104441 -d tape -c force -p initIRD.sap -cds'
BR0280I BRBACKUP time stamp: 2010-07-28 11.32.18
BR0261E BRBACKUP cancelled by signal 15
BR0056I End of database backup: bedtrieb.ant 2010-07-28 11.32.18
BR0280I BRBACKUP time stamp: 2010-07-28 11.32.18
BR0054I BRBACKUP terminated with errors
BRARCHIVE Show action/Deatils :
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/IRD/sapreorg/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0278E Command output of 'LANG=C cd /oracle/IRD/sapreorg && /usr/sap/IRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1':
Cannot create <.tape.hdr0> (errno:13)
10 blocks
.tape.hdr0
BR0280I BRARCHIVE time stamp: 2010-07-28 11.32.04
BR0279E Return code from 'LANG=C cd /oracle/IRD/sapreorg && /usr/sap/IRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1': 2
BR0359E Restore of /oracle/IRD/sapreorg/.tape.hdr0 from /dev/rmt3.1 failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt3.1 failed
BR0280I BRARCHIVE time stamp: 2010-07-28 11.32.04
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0007I End of offline redo log processing: aedtrieb.cds 2010-07-28 11.32.18
BR0280I BRARCHIVE time stamp: 2010-07-28 11.32.18
BR0005I BRARCHIVE terminated with errors
Kindly advise

Hi Varathu,
i got error at the end of BRarchive .... Kindly check the last few lines of Archive log ...
BR0014I 51 of 52 offline redo log files processed - 2075.860 of 2080.542 MB done
BR0204I Percentage done: 99.77%, estimated end time: 14:29
BR0001I **************************************************
BR0202I Saving /oracle/IRD/oraarch/IRDarch1_13485_660949939.dbf
BR0203I to /dev/rmt3.1 ...
#ARCHIVE.. /oracle/IRD/oraarch/IRDarch1_13485_660949939.dbf
#SAVED.... IRDarch1_13485_660949939.dbf IRDB02/364
BR0280I BRARCHIVE time stamp: 2010-07-27 14.29.25
BR0014I 52 of 52 offline redo log files processed - 2080.542 of 2080.542 MB done
BR0204I Percentage done: 100.00%, estimated end time: 14:29
BR0001I **************************************************
BR0016I 320 offline redo log files processed, total size 13300.875 MB
BR0202I Saving space_log
BR0203I to /dev/rmt3.1 ...
BR0202I Saving det_log
BR0203I to /dev/rmt3.1 ...
BR0202I Saving sum_log
BR0203I to /dev/rmt3.1 ...
BR0280I BRARCHIVE time stamp: 2010-07-27 14.29.43
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/IRD/sapreorg/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0278E Command output of 'LANG=C cd /oracle/IRD/sapreorg && /usr/sap/IRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1':
Cannot create <.tape.hdr0> (errno:13)
10 blocks
.tape.hdr0
Kindly suggest

Backup error in DEV and QA Server

Dear all ,
I got the error when i am trying to take backup ,
pls check the log .
BR0280I BRBACKUP time stamp: 2010-07-15 11.29.52
BR0226I Rewinding tape volume in device /dev/rmt0 ...
BR0278E Command output of 'LANG=C tctl -f /dev/rmt0 rewind':
/dev/rmt0: No such device or address
BR0280I BRBACKUP time stamp: 2010-07-15 11.29.52
BR0279E Return code from 'LANG=C tctl -f /dev/rmt0 rewind': 2
BR0213E Winding tape volume in device /dev/rmt0.1 failed
BR0056I End of database backup: bedrfoqg.ant 2010-07-15 11.29.52
BR0280I BRBACKUP time stamp: 2010-07-15 11.29.52
BR0054I BRBACKUP terminated with errors
Kindly suggest
Regards

Hi rajesh ,
I have changed the below mwntion parameter .
tape_address = /dev/rmt2
tape_address_rew = /dev/rmt2
i have followed the below steps for archive log backup through Brtools .
Backup and database copy
1 = Database backup
2 - Archivelog backup
3 - Database copy
4 - Non-database backup
5 - Backup of database disk backup
6 - Verification of database backup
7 - Verification of archivelog backup
8 - Additional functions
9 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
2
BR0280I BRTOOLS time stamp: 2010-07-19 16.43.11
BR0663I Your choice: '2'
BR0280I BRTOOLS time stamp: 2010-07-19 16.43.11
BR0657I Input menu 17 - please enter/check input values
BRARCHIVE main options for archivelog backup and verification
1 - BRARCHIVE profile (profile) ...... [initIRQ.sap]
2 - BRARCHIVE function (function) .... [save]
3 - Backup device type (device) ...... [tape]
4 ~ Tape volumes for backup (volume) . []
5 # BACKINT/Mount profile (parfile) .. []
6 - Database user/password (user) .... [/]
7 ~ Maximum number of files (number) . []
8 - Back up disk backup (archive) .... [no]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
4
BR0280I BRTOOLS time stamp: 2010-07-19 16.43.36
BR0663I Your choice: '4'
BR0280I BRTOOLS time stamp: 2010-07-19 16.43.36
BR0681I Enter string value for "volume" (scratch|<tape_vol>|<tape_vol_list>) []:
000031L3
BR0280I BRTOOLS time stamp: 2010-07-19 16.43.58
BR0683I New value for "volume": '000031L3'
BR0280I BRTOOLS time stamp: 2010-07-19 16.43.58
BR0657I Input menu 17 - please enter/check input values
BRARCHIVE main options for archivelog backup and verification
1 - BRARCHIVE profile (profile) ...... [initIRQ.sap]
2 - BRARCHIVE function (function) .... [save]
3 - Backup device type (device) ...... [tape]
4 ~ Tape volumes for backup (volume) . [000031L3]
5 # BACKINT/Mount profile (parfile) .. []
6 - Database user/password (user) .... [/]
7 ~ Maximum number of files (number) . []
8 - Back up disk backup (archive) .... [no]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2010-07-19 16.44.03
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRTOOLS time stamp: 2010-07-19 16.44.03
BR0657I Input menu 18 - please enter/check input values
Additional BRARCHIVE options for archivelog backup
1 - Confirmation mode (confirm) ....... [yes]
2 - Query mode (query) ................ [no]
3 - Compression mode (compress) ....... [no]
4 - Verification mode (verify) ........ [no]
5 - Fill mode, group size (fill) ...... [no]
6 - Modify mode, delay apply (modify) . [no]
7 - Additional output (output) ........ [no]
8 - Message language (language) ....... [E]
9 - BRARCHIVE command line (command) .. [-p initIRQ.sap -save -d tape -v 000031
L3 -k no -l E]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2010-07-19 16.44.07
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRARCHIVE will be started with options '-p initIRQ.sap -save -d tape -v
000031L3 -k no -l E'
BR0280I BRTOOLS time stamp: 2010-07-19 16.44.07
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2010-07-19 16.44.13
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0002I BRARCHIVE 7.00 (34)
BR0180E Backup devices with and without rewind have the same address
BR0189W Expiration period equal 0 - backup volumes could be immediately overwrit
ten
BR0007I End of offline redo log processing: aedsahub.log 2010-07-19 16.44.13
BR0280I BRARCHIVE time stamp: 2010-07-19 16.44.14
BR0005I BRARCHIVE terminated with errors
BR0292I Execution of BRARCHIVE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2010-07-19 16.44.14
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
Kindly Advise

Transport Error from Dev to QA.

Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request   : BD1K922532
System              : BQ1
tp path             : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SD

Hi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD

Backup error on DEV (Permission denied)

Dear all,
Pls check the backup log...
10:49:03     Job started
10:49:03     Step 001 started (program RSDBAJOB, variant &0000000000222, user ID S2K_SATHIES)
10:49:04     Execute logical command BRBACKUP On host SAPDEVQA
10:49:04     Parameters:-u / -jid ALLOG20100823104903 -c force -t online -m all -p initIRD.sap -a -c force -p initIRD.sap -c
10:49:04     ds
10:49:04     BR0051I BRBACKUP 7.00 (48)
10:49:04     BR0055I Start of database backup: bedypdqe.ant 2010-08-23 10.49.04
10:49:04     BR0252E Function fopen() failed for '/oracle/IRD/sapbackup/bedypdqe.ant' at location main-9
10:49:04     BR0253E errno 13: Permission denied
10:49:04     BR0121E Processing of log file /oracle/IRD/sapbackup/bedypdqe.ant failed
10:49:04
10:49:04     BR0056I End of database backup: bedypdqe.ant 2010-08-23 10.49.04
10:49:04     BR0280I BRBACKUP time stamp: 2010-08-23 10.49.04
10:49:04     BR0054I BRBACKUP terminated with errors
10:49:04     External program terminated with exit code 3
10:49:04     BRBACKUP returned error status E
10:49:04     Job finished
Kindly advise
Regards

issu has been resolved , after given permission 777 to sapbackup(directory)

Transport Error When dev to Quality

Transport Error on Quality System
Hi Gurus,
I can face an error when moving query in dev to quality,
Error when activating element 497HY34X0YTB2D1KDTUFYWP4I
Element 497HY3CLJXF0KZL0JNWS8YNUA is missing in version M
Element 497HY59QAKUE8MG206HURGCAA is missing in version M
Please send me your valuable suggestion,
Its very urgent,
Thanks

Dear,
Transporting queries is little different than transporting other objects..
Did you follow the right way..
Kindly check against :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Also see the discussion :
Query transport
Thanks

Brbackup error ; ORA-01031: insufficient privileges

Hi Experts,
We are getting following error when to try to backup our database ;
BR0301E SQL error -1031 at location BrSapTspList-8, SQL statement:
'PREPARE stmt_1 STATEMENT FROM'
'SELECT TABSPACE FROM "SAPSR3".TSORA UNION SELECT INDSPACE FROM "SAPSR3".TSORA ORDER BY 1'
ORA-01031: insufficient privileges
BR0056I End of database backup: bebakpth.ant 2009-07-16 10.54.47
BR0280I BRBACKUP time stamp: 2009-07-16 10.54.47
BR0054I BRBACKUP terminated with errors
How can we fix it,
Regards

Dear atakan yavuz
i have faced this issue and fix the issue.
After executing Oracle sapdba_role.sql which is provided in sapdba_role_ora10.SAR from SAP Note: Note 134592 - Importing the SAPDBA role (sapdba_role.sql)
Please execute manaully from sql prompt below statemets to assign the privileges to the owner SAPSR3 for the following tables which will fix the issue.
grant ALL on SAPSR3.SDBAH to sapdba;
grant ALL on SAPSR3.SDBAD to sapdba;
grant ALL on SAPSR3.DBAML to sapdba;
grant ALL on SAPSR3.DBARCL to sapdba;
grant ALL on SAPSR3.DBAFID to sapdba;
grant ALL on SAPSR3.DBAEXTL to sapdba;
grant ALL on SAPSR3.DBAREOL to sapdba;
grant ALL on SAPSR3.DBABARL to sapdba;
grant ALL on SAPSR3.DBADFL to sapdba;
grant ALL on SAPSR3.DBAOPTL to sapdba;
grant ALL on SAPSR3.DBASPAL to sapdba;
grant ALL on SAPSR3.DBABD to sapdba;
grant ALL on SAPSR3.DBABL to sapdba;
grant ALL on SAPSR3.DBATL to sapdba;
grant ALL on SAPSR3.DBAOBJL to sapdba;
grant ALL on SAPSR3.DBAPHAL to sapdba;
grant ALL on SAPSR3.DBAGRP to sapdba;
grant ALL on SAPSR3.DBAERR to sapdba;
grant ALL on SAPSR3.DBATRIAL to sapdba;
grant ALL on SAPSR3.DBSTATC to sapdba;
grant ALL on SAPSR3.DBSTATTORA to sapdba;
grant ALL on SAPSR3.DBSTATIORA to sapdba;
grant ALL on SAPSR3.DBSTATHORA to sapdba;
grant ALL on SAPSR3.DBSTAIHORA to sapdba;
grant ALL on SAPSR3.DBMSGORA to sapdba;
grant ALL on SAPSR3.DBCHECKORA to sapdba;
grant ALL on SAPSR3.MLICHECK to sapdba;
grant SELECT on SAPSR3.TGORA to sapdba;
grant SELECT on SAPSR3.IGORA to sapdba;
grant SELECT on SAPSR3.TSORA to sapdba;
grant SELECT on SAPSR3.TAORA to sapdba;
grant SELECT on SAPSR3.IAORA to sapdba;
grant SELECT on SAPSR3.SVERS to sapdba;
grant SELECT on SAPSR3.CVERS to sapdba;
grant SELECT on SAPSR3.DD02L to sapdba;
grant SELECT on SAPSR3.DD09L to sapdba;
grant SELECT on SAPSR3.DDNTT to sapdba;
grant SELECT on SAPSR3.DDART to sapdba;
grant SELECT on SAPSR3.DARTT to sapdba;
grant SELECT on SAPSR3.DBCHK to sapdba;
grant SELECT on SAPSR3.DBDIFF to sapdba;
grant ALL on SAPSR3.SAPLIKEY to sapdba;
grant SELECT on SAPSR3.RSNSPACE to sapdba;
grant SELECT on SAPSR3.RSPSPACE to sapdba;
The cause is sapdba role script existing owner is SAPR3 but from SR3 release default owner is SAPSR3 so which is causing this issue so when grant the above tables to the SAP DB owner SAPSR3 where they can access the tables.The similar issue you will when you try to execute DBCheck also and even saplicense shows no valid license found.
Me too searching for Oracle 10.2.0.4 SAP SR3 release sapdba role in service market place which i am unable to find waiting for update from sap suppport.
Update in this thread after this action whether your issue has been solved.I
Best Regards,
Venkata.
Edited by: babjipvr on Jul 22, 2009 6:25 PM
Edited by: babjipvr on Jul 22, 2009 6:31 PM

Strange BRBackup error

Hello all,
I am facing a strange issue with brbackup. When initiating a backup from brtools on the OS, the backup works perfectly. However, when i try to start the backup from DB13, it fails.
I'm running SAP 4.7 on Oracle 9.2.
I have added a part of the logs from both a succesfull and an unsuccesfull backup.
Can somebody shed some light on this?
Kind regards,
Cees
This is a part of the log of the failing backup :
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0057I Backup of database: DS1
BR0058I BRBACKUP action ID: bdygmzqe
BR0059I BRBACKUP function ID: anf
BR0110I Backup mode: ALL
BR0077I Database file for backup: K:\oracle\DS1\sapbackup\cntrlDS1.dbf
BR0061I 27 files found for backup, total size 71429.789 MB
BR0143I Backup type: online
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0315I 'Alter tablespace PSAPDS1 begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0315I 'Alter tablespace PSAPDS1620 begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0315I 'Alter tablespace PSAPDS1USR begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0315I 'Alter tablespace PSAPUNDO begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0315I 'Alter tablespace SYSTEM begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0315I 'Alter tablespace WISE begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0229I Calling backup utility with function 'backup'...
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0279E Return code from 'L:\usr\sap\DS1\SYS\exe\run\backint.exe -u DS1 -f backup -i K:\oracle\DS1\sapbackup\.bdygmzqe.lst -t file -p J:\oracle\DS1\920\database\initDS1.utl -c': 128
BR0232E 0 of 27 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-07-01 02.00.57
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.00
BR0317I 'Alter tablespace PSAPDS1 end backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.00
BR0317I 'Alter tablespace PSAPDS1620 end backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.01
BR0317I 'Alter tablespace PSAPDS1USR end backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.01
BR0317I 'Alter tablespace PSAPUNDO end backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.01
BR0317I 'Alter tablespace SYSTEM end backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.01
BR0317I 'Alter tablespace WISE end backup' successful
BR0056I End of database backup: bdygmzqe.anf 2008-07-01 02.00.57
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.01
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.01
BR0291I BRARCHIVE will be started with options '-U -d util_file -c force -p initDS1.sap -cds'
BR0280I BRBACKUP time stamp: 2008-07-01 02.01.02
BR0292I Execution of BRARCHIVE finished with return code 5
This is a part of the logfile from the succesfull backup :
BR0280I BRBACKUP time stamp: 2008-07-01 12.53.52
BR0057I Backup of database: DS1
BR0058I BRBACKUP action ID: bdygpfpd
BR0059I BRBACKUP function ID: anf
BR0110I Backup mode: ALL
BR0077I Database file for backup: k:\oracle\DS1\sapbackup\cntrlDS1.dbf
BR0061I 27 files found for backup, total size 71429.789 MB
BR0143I Backup type: online
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0280I BRBACKUP time stamp: 2008-07-01 12.53.52
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.14
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0315I 'Alter tablespace PSAPDS1 begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0315I 'Alter tablespace PSAPDS1620 begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0315I 'Alter tablespace PSAPDS1USR begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0315I 'Alter tablespace PSAPUNDO begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0315I 'Alter tablespace SYSTEM begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0315I 'Alter tablespace WISE begin backup' successful
BR0280I BRBACKUP time stamp: 2008-07-01 12.54.15
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of 'L:\usr\sap\DS1\SYS\exe\run\backint.exe -u DS1 -f backup -i k:\oracle\DS1\sapbackup\.bdygpfpd.lst -t file -p J:\oracle\DS1\920\database\initDS1.utl':
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program:          L:\usr\sap\DS1\SYS\exe\run\backint.exe 5.1
Input File:          k:\oracle\DS1\sapbackup\.bdygpfpd.lst
Profile:          J:\oracle\DS1\920\database\initDS1.utl
Function:          BACKUP
Backup Type:          BACKUP_FILE
[1832.00] Backup started 07/01/2008 12:54:15
[1832.00]
[1832.00] 12:54:17 Initiating backup
[1832.00] 12:54:28 INF - Waiting for mount of media id 000089 on server srv0002 for writing.
[1832.00] 12:54:29 INF - BACKUP START
[1832.00] 12:54:29 BKR - M:\
[1832.00] 12:54:29 BKR - M:\oracle\
[1832.00] 12:54:29 BKR - M:\oracle\DS1\
[1832.00] 12:54:29 BKR - M:\oracle\DS1\sapdata2\
[1832.00] 12:54:29 BKR - M:\oracle\DS1\sapdata2\undo_1\
[1832.00] 12:57:44 INF - Beginning backup on server srv0002 of client srv0044.
[1832.00] 13:11:51 BKR - M:\oracle\DS1\sapdata2\undo_1\UNDO.DATA1
[1832.00] 13:11:51 BKR - M:\

Hello Stefan,
The third party tool we are using is Veritas Netbackup.
I use sapservice<sid>, who is the same user as SAP is using for executing the backup.
The external tool is not initiating the backup, but only used as the administrative tool for the backups. the backup is initiated from sap to brbackup. setting the tablespaces is not the error in this case.
The third pasrty tool doesn't create a logfile, because the backup aborts before communicating with the backup-tool.
I suspect some environment variable or something, but i havent'found out which one.
Especially because doing the backup from BR*Tools works perfectly.
Regards,
Cees

BRBackup error on DEV & QA

Similar Messages

Maybe you are looking for