BrdMgr 3.9 fails to load, causes server to freeze

Am beginning to troubleshoot a problem with a NetWare server (6.5 sp8) running BrdMgr 3.9 that stopped working awhile back. In fact, the server is still running fine but with BorderManager not loaded for the time being. BrdMgr. was only being used as a Proxy server. When the problem began late last year, everytime there was an attempt to load BrdMgr., the server would freeze up and a hard reset was required. So I am wondering whether we need to just re-create the cache volumes and delete the DNS cache - perhaps there is some corruption there that is causing the server to tank. Or, re-install a BrdMgr support pack? Any ideas? Thanks.
I will likely have more info once I visit the site later today.

djhess,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Intel HD3000 graphics and sound drivers fail to load on Server 2008

I managed to install Windows Server 2008 x64 on a separate partition without Boot Camp, but I'm having issues with my drivers. Windows 7 drivers are compatible with Server 2008 in most cases. Since Boot Camp doesn't support Server editions I attempted to install the drivers myself, but I keep getting error 39 on my HD3000 graphics drivers. Went through multiple reboots, rollbacks, and driver reinstalls using both the official drivers and the Boot Camp drivers.
Is there a way to modify the Boot Camp driver install package to bypass the Windows 7 requirement? I tried to manually install the drivers from the Boot Camp folders (tried several variations of them as well) but I'm still not getting proper sound, graphics, or wifi. All my services are properly configured to enable them, and the device manager shows driver failed to load errors.
If people are able to get Windows 7 drivers installed that means there needs to be a way to do this with Server 2008 (not R2).
I need this to run natively, not virtualized.
Seems to me the easiest way to fix this would be to bypass the desktop-only limitations of Boot Camp, but I'm guessing there's no easy work around.
. Why the restrictions?
I'm running a MacBook Pro 8.1 (late 2011 release).
I tried using test mode but that failed to fix what I thought might be a driver signing issue.

IIRC, Apple doesn't expose the Intel embedded GPU to WIndows, only the discreet GPU. If my memory is correct, that would explain why you can't install the drivers for hardware that WIndows doesn't see.

Opening SQL Server Management Studio causes server to freeze - mouse stops working

I have a virtual server running Windows Server 2012 with SQL Server 2012 on it. Recently I went to open SSMS and it caused the entire server to freeze. I can't click on anything- nothing in SSMS, on my desktop, my taskbar, or anywhere else.
All I can do is close the remote desktop window, log in as a different user and restart the server to get it to unfreeze. I found that I can use keyboard arrows for basic navigation within SSMS and the Enter key to Connect to the database but that's
it. I've tried uninstalling and reinstalling the software with no luck. Event Viewer doesn't log any errors.
We use this server for GIS data so ESRI's ArcSDE programs are also running on the machine- they are acting buggy for some users but not others. I don't know if this is related. We've also been having issues with the backups from vRanger which
have caused random server crashes. Our Server/Network Admin has temporarily disabled backups. I'm afraid the instability has messed something up at a deeper level but I don't know where to start looking. Any advice would be appreciated.
Christina

The GIS people have wanted to have all their software running directly on the server, including SSMS, based on recommendations from their ESRI consultant. I will ask again why this is necessary.
No matter what the consultant says, you can always connect to the server from another machine. (Unless the instance is configured to not accept remote connections.)
While waiting for the server admin to increase the memory of the VM, you can connect to the server with SQLCMD from the command line and issue these commands:
EXEC sp_configure 'max server memory', 2000
RECONFIGURE
go
This restricts how much memory SQL Server can consume, and you should now be able to run SSMS on the server. The performance of SQL Server may suffer, though.
When you get more memory, run the commands above again, but with 6000 instead of 2000.
Erland Sommarskog, SQL Server MVP, [email protected]

Itunes store fails to load, and progress bar freezes, even though i am logged in.

i cannot get the itunes store to load on my windows 7 starter netbook. i use both firefox and IE browsers. and use a 3g dongle connection. itunes has been working fine up until a month ago. now it refuses to fully load. i have checked all intenet options which are correct. and firewall settings, which allows full access to itunes. running the itunes diagnostic reports that i am not the administrator ... despite the fact that i am signed into windows as an administrator!
i recently updated to itunes 10.4. should i go back to an earlier version?
what is causing this enduring frustating problem? and what is itunes doing about it?

i also got the very long list of titles,, in blue writing ... latest cds, movies etc, without any images! like a shopping list, or the bare bones of a web page. but this only appeared on screen after i disconnected from the internet.
i am amazed that itunes are not targeting this problem with a an alert on itunes. it is affecting quite a few users. but they don't seem to care. i've tried every means of contact, but just got the runaround treatment!

Servlet spawning multiple threads causes server to freeze PC

I'm attempting to write a servlet which, upon receipt of a particular GET request, spawns a thread to do various work which can then be queried by a different GET request. A third type of GET request stops a specified thread.
This is working fine, except that I can only seem to have spawned one thread at a time. When I spawn another thread, my entire PC stops responding (even Windows Task Manager becomes so sluggish that I cannot kill the server) , and I have to do a hard reset of my PC. I'm using Sun Java System Application Server. The server logs do not contain any errors. I've tried the NetBeans debugger a bit, and it seems to happen when I call the start() method of the Thread.
This is my first experience with servlets, as well as my first experience with Sun Java System Application Server. I'm also not a Java expert by any means. I'm sure I'm doing something stupid, but I haven't a clue what.
I can post my code if necessary, but does anyone have any idea what could be causing the server to stop responding just because a servlet spawns two threads? Should I post my code?
Sorry if this is a n00b question. Thanks in advance.

I think you may need to spawn it into HTML frame. Each frame will perform
          and download independently.
          Is it what you need ?
          Siros
          "sam ernie" <[email protected]> wrote in message
          news:[email protected]..
          > Hi,
          >
          > In our application, the content of the main page is being
          > retrieved from different databases. All the requests originiate from
          > one JSP to different databases to retrieve the info. As the JSP
          > processes each of the request sequentailly, there is considerable delay
          > before the contents are displayed to the user.
          >
          > What I want to acheive is spawn multiple threads and display the content
          > to the user in fractions as each thread returns. For eaxmple, if the
          > user has subscribed to three news servers.. I want to be able to
          > display the news from first server to the user without waiting to
          > recieve response from the other two servers.
          >
          > What is the best approach to follow for such requirements ?? Any
          > thoughts on this would be highly appreciated.
          >
          > Thanks,
          >
          > Sam
          >

All ALSA plugins fail to load. Flash still plays sound however.

Alsa is basically functioning as alsamixer will load and does affect my volume. However any program that requires alsa plugins besides flash-player fail to load.
What follows is the output from running alsaplayer.
$ alsaplayer
snd_pcm_open: No such file or directory (default)
Failed to initialize plugin!
Failed to register plugin: /usr/lib/alsaplayer/output/libalsa_out.so
Failed to load output plugin "alsa". Trying defaults.
snd_pcm_open: No such file or directory (default)
Failed to initialize plugin!
/usr/lib/alsaplayer/output/libalsa_out.so failed to load
jack: server not running?
/usr/lib/alsaplayer/output/libjack_out.so failed to load
error opening /dev/dsp
Failed to initialize plugin!
/usr/lib/alsaplayer/output/liboss_out.so failed to load
Failed to initialize plugin!
/usr/lib/alsaplayer/output/libesound_out.so failed to load
NOTE: THIS IS THE NULL PLUGIN. YOU WILL NOT HEAR SOUND!!
Here is the output of the respective commands, posted as suggested on the wiki.
$ lsmod|grep '^snd' | column -t
snd_hda_codec_hdmi 22784 1
snd_hda_codec_conexant 42084 1
snd_hda_intel 22186 1
snd_hda_codec 77703 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6342 1 snd_hda_codec
snd_pcm 73736 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 19488 1 snd_pcm
snd 57384 8 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Jun 27 22:56 by-path
crw-rw----+ 1 root audio 116, 7 Jun 27 22:56 controlC0
crw-rw----+ 1 root audio 116, 10 Jun 27 22:56 controlC1
crw-rw----+ 1 root audio 116, 6 Jun 27 22:56 hwC0D0
crw-rw----+ 1 root audio 116, 5 Jun 27 22:56 hwC0D1
crw-rw----+ 1 root audio 116, 9 Jun 27 22:56 hwC1D0
crw-rw----+ 1 root audio 116, 4 Jun 27 22:56 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jun 27 22:56 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jun 27 22:56 pcmC0D1p
crw-rw----+ 1 root audio 116, 8 Jun 27 22:56 pcmC1D3p
crw-rw---- 1 root audio 116, 1 Jun 27 22:56 seq
crw-rw----+ 1 root audio 116, 33 Jun 27 22:56 timer
Last edited by Untamed9999 (2011-06-28 03:10:20)

Thank you. Problem solved. disabling "FoxiFrame aerosnap" and resetting the toolbars and controls did the magic. Well, gotta clean up my interface now...

Failed to load webapp and Could not discover administration URL for server

Not able to deploy application on SOA server.
Hi All,
I am not able to deploy my application to the SOA server as i am getting the below error..I am not using bam server at all and still it is saying "Could not discover administration URL for server 'bam_server1'." plz help.
[07:53:58 PM] [Deployer:149191]Operation 'deploy' on application 'ProjectCreationApplication' is initializing on 'soa_server1'
[07:53:58 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[07:53:59 PM] [Deployer:149193]Operation 'deploy' on application 'ProjectCreationApplication' has failed on 'soa_server1'
[07:53:59 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: Failed to load webapp: '/workflow/ProjectCreation_UI'.
[07:54:01 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:01 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.workflow.client.worklist.servlet.IntegrateTaskFlowWithTask
[07:54:01 PM] See server logs or server console for more details.
[07:54:01 PM] weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:03 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[07:54:03 PM] #### Deployment incomplete. ####
[07:54:03 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Hi Vipin,
Might be the way you're deploying your ADF UI project.
Are you right clicking the name of your ADF UI project in the Application Navigator tab and then clicking "Deploy"? While this works great for your BPM composite project, you'll get errors like this when deploying the ADF project in the same manner.
Dan

Server Admin Problem - File Sharing fails to load

We recently switched over from a 10.4 server to an Intel Quad Core Xserve running 10.5.8. Things seemed to be working for about a week but now The File Sharing part of Server Admin fails to load. After spinning for a few minutes I get a kNetworkError on the File Sharing Service.
I'm not totally through setting up all the share points so this is causing quite a problem. Otherwise the Sharepoints that are set up are working properly. The first time this happened a server restart cleared the problem. This time nothing seems to help.
Anyone have a cure for this?

The problem seems to be getting worse. Once the error occurs some of the other services are not available through SA either. Anybody have any suggestions, or is it a reformat and reinstall situation?

The server failed to load application '/LM/W3SVC/1/ROOT'.

Hi,
I'm using Crystal report XI release two with visula studio 2005. I was fcing some problem with my IIS so i reinstalled it.After reunstalling the IIS i'm not able to work withh IIS. when i checked Event log files i found the following error message:
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was 'No such interface supported
I found the following link [http://support.microsoft.com/kb/286814] which tells the problem. But this link talk about the problem with crystal report 8.
how can i solve the problem with CRXI.
Thanks in advance

The MS kbase you found was very, very specific to a particular version of CR and never ever occured in any subsequent versions of CR. As you started to have the issue on reinstall of IIS, I do not see how htis issue would be caused by Crystal Reports. E.g.in this case, I believe that just because the error is the same does not mean it is the same cause.
A troubleshooting suggestion I'd have is to use the utility regmon and see what key is denying access. Regmon can be downloaded from here:
http://www.microsoft.com/technet/sysinternals/utilities/regmon.mspx
Ludek
Edited by: Ludek Uher on May 14, 2009 6:48 AM

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

When connecting to a server farm in sharepoint foundation 2013 cannot create new farm error: One or more types failed to load

When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
PS C:\Users\Administrator> New-SPConfigurationDatabase
cmdlet New-SPConfigurationDatabase at command pipeline position 1
Supply values for the following parameters:
DatabaseName: SharePoint_Config
DatabaseServer: PC78\SQLEXPRESS,25111
FarmCredentials
Passphrase: *********
New-SPConfigurationDatabase : One or more types failed to load. Please refer
to the upgrade log for more details.
At line:1 char:1
+ New-SPConfigurationDatabase
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
deException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
figurationDatabase
And the error log is shown below :
Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
Please refer to the upgrade log for more details.
at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
...String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
we are using server 2012 R2 and we don't have office 2010 installed

Yes,SQL server is on the same server as SharePoint
SQL has both the permissions Securityadmin
and DBcreator roles on SQL Server.
When we run those sharepoint management shell commands the database will be created with the error
msg (shown in attachment)

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

Failed to load resource: the server responded with a status of 404 (Not Found)

I uploaded 2 x small Wordpress sites to Azure this morning using the local Git repository on my iMac. They worked fine when I checked them earlier and now I see the websites are not loading correctly with 30+ errors on each effecting all .css, .js and
.jpg files - using view source, these are the error messages.
Failed to load resource: the server responded with a status of 404 (Not Found)
When I open the web root in my ftp client the files are definitely there as you would expect. I am using Azure Small Basic Hosting, any thoughts on what has gone wrong and how to fix the websites?
Site 1: http://goo.gl/VONbHc
Site 2: http://goo.gl/wdTP67
Liam

Hi,
I tested your site 1, when I open http://goo.gl/VONbHc, it direct me to
http://templestudios.azurewebsites.net/ ,so I think you create templestudios as your azure website name. it seems that the page will go directory to another page, one image html code as below.
<img width="300" height="225" title="Portrait Photography" class="thumb wp-post-image" alt="Portrait Photography" src="http://www.photostudio.ie/wp-content/uploads/portrait-girl-dublin-300x225.jpg">
The image was not found seems more relate to
http://www.photostudio.ie , I open this site, contents are as following screenshot.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BrdMgr 3.9 fails to load, causes server to freeze

Similar Messages

Maybe you are looking for