Breadcrumb Seperator Not Showing Up on One Tab's Pages Only

I am working on a site that has 2 levels of tabs. On all the 3rd level pages (the lowest level) the seperator shows up between the first and second level breadcrumb except for the one 2nd level tab's pages don't have it. I have spent much time looking at the code and can't find what is wrong; I even recreated the page with the tab and breadcrumb seperately and it still doesn't show up. I believe it's a bug in the APEX software but I'm not sure. If anyone has any insight into this I would greatly appreciate it. Please help so I can get past this issue!

If it's the same problem as that described here, Re: Breadcrumbs Look Different on Certain Pages , it will be fixed in version 3.1.
Scott

Similar Messages

AGPM and security security filtering: gpos not showing up in uncontrolled tab

Why Does a gpo not show up in uncontrolled tab? The only thing that is removed is "authenticated users" from security filtering of said gpo. Once I add authenticated users back, bang! its back visible in uncontrolled tab.
Adding specific groups and removing authenticated users from security filtering is a standard practice to apply group policy. Can this not be used with AGPM?
version 4.2

Hi,
For AGPM questions, in order to get accurate help, it's recommended that we ask for advice in the following dedicated AGPM forum.
Microsoft Advanced Group Policy Management (AGPM)
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdopagpm
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

TS3697 My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.

My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.
What am I going to do?

The Photos tab doesn't appear there. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos e.g. :
If you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Bill To Address contents is not showing in invoice logistics tab

Hi All,
Bill To Address contents is not showing in invoice logistics tab though i have defined the Bill To Addresses for Business Partners.
Same is happening with my Ship To addresses.
Please Suggest.
Regards.
ShriX.

I encountered the same issue, please do the following to make the Bill to address in the documents work.
In the Administration -> Setup -> Business Partners -> Countries
Look for the Code where your business partners country are set.
Then in the Address Format, choose your format. In my case I choose our company format. Hope this help.
Regards,
Cyrous

My ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty

my ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty

Place the iPod in Recovery mode and then restore

Plus sign not showing up next to tabs (to enable opening of new tab).

Plus sign not showing up next to tabs (to enable opening of new tab).
Can I toggle a setting in about:config?
Have turned off all add-ons, and re-started but plus sign did not show up. I am using FF4.0.1.

Hi.
I have fixed the problem.
I was asked to "Restore Defualt Set" originally.
After doing that, I wanted to "customize" the sidebar as there were a few toolbar items I wanted displayed.
I found that the "Plus sign" is a "toolbar item".
So I simply dragged it next to the right of the tab/s (up top) and dropped it. Now everything is back to normal, and I can open new tabs with the "Plus sign".
Thankyou for all your help.
I hope this answer can also help others at some time.
All The Best.
Michael Lindsay.
Melbourne, Australia.

Not show the header on the first page of a section

I am writing a manual that has about 7 chapters. Each chapter is its own section. I have been able to go in and create a header for each of these sections very easily. However, it's not quite clear how to NOT show the header on the first page of the section. For example, one of my sections is called "Personal Finances", so I have that in bold a the top of the page using Header 1. Because I have that, I don't also need "Personal Finances" showing in the top right corner in the header.
How can I make it so that it won't show on the first page of each section?
Thanks!

How can I make it so that it won't show on the first page of each section?
In the "Layout Inspector" under the "Section" tab, check the "First page is different" option while one of that section's pages is active/selected/displayed. Then add or delete the header as may be needed so that first page of section does not display the header and all other pages in the section do display. (I.e., what you specifically have to do here depends on whether or not you are already on the first page of the section when you make the change to the display "switch" and whether you are starting with a blank or non-blank header.)

Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment. after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page. the text is straight across left to right then starts to waver and then then stops altogether. i tried a different black toner cartidge and the problem remains.

> so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black. Ok its not the controller. > Still prints all black. Ok its not the fuser. > its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there? Formatter board hasnt been mentioned. Something is sending a command to the printer that is telling it to open up the doors and charge the entire page. Normally the laser is responsible for charging the media. As the media passes over the toner doors it atracts toner particles. Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe? Perhaps but not likely. If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer. http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors. Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.

I live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

i live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

Doesn't matter. That store is likely selling illegit iphones, brought oin from somewhere else.
The fact remains the UAE government does not allow Facetime on iphones legitimately sold there.

IPhone5 not showing up in devices tab on iMac, can't transfer songs from computer to phone

I have a new iPhone5 and an iMac running Snow Leopard. I have scads of songs on my computer that are mostly from CDs. When I hooked the new phone up to the computer, the newly purchased songs on the phone loaded onto the computer automatically. However, the phone does not show up in the "devices" tab on the Finder and I can't see any way to transfer all the songs from the computer to the phone. Many thanks for all help. -J

This has to be one of the most useless forums on the Internet. Of the 15 problems I have posted here, I have gotten solutions to only THREE! Several others I found the answer to myself, and posted them. Many of my problems have absolutely NO responses to whatsoever, including this one.
If any real Apple employees scour this forum looking for ways to help customers, they aren't doing any kind of a decent job at it. In fact, I doubt that Apple "wastes" its money doing any such thing at all. We are left to our own devices, or to call Apple Support with its additional hassle.
I'm a member of several other support forums, and I can tell you that within hours and sometimes minutes, my questions are answered, often with very detailed suggestions from people who are obvious experts. Almost invariably, these are forums where the administrators are unpaid volunteers, and they are full of expert members who just like helping out. Why are there so few such people in this official Apple community?
Does anyone know of any Apple/Mac forums where people actually get help with their problems? -J

IT 1017 not showing correctly in PPOME tabs

Hi Experts,
I have a requirement to put the PD Profile (IT1017) in one of the PPOME tabs in the detail area. I was able to do that but when I view the contents of the tab, it is not showing the correct contents as to what normally shows when we go to PP01 then view the PD Profile infotype. Do you have any ideas with regards to the setting of this PD profile tab? Please help. Thanks in advance.
Regards,
Arvin

Hi Arvin,
Did you find a way to do so at the end ?
Regards,
Thomas

Ipod Touch 5th Gen - Not showing albums in artist tab

Hi, not sure if anyone else has this problem... I recently added some new music to my ipod, I like to listen to artists one at a time with all their albums they have. When I go into my Album tab, it shows all of my albums however when I go into my artist tab to select an artist, only the albums that I've had for 6 months+ show up and not my recently added ones.
I have no idea what to do. Can any one help me?

If not the U2 album then
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: auto;
    float: left;
The rest have been given a width of 15em, so this value may be a good start.
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
   width: auto;
    background-attachment: fixed;
Just keep the border property and remove the other two.
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
          display: inline;
          f\loat: left;
          background: #FFF;
The following is the original for the above
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;
Cheers,
Gramps

I added a new post to my iTunes U course and it is not showing up on one of my student's iPads. She has only one Apple ID on the iPad. Any assistance is appreciated.

A new post to my iTunes U course shows up in my course both on my Mac and my iPad Air, as well as on other students' iPads, but for one single student. We have closed the app and forced shutdown. Student recently added more icloud space, but that is all. iPad is up-to-date in terms of iOS and iTunesU app. The student has only one Apple ID associated with her iPad.
We have reposted two more times. The second time the post showed up for a few seconds, but then disappeared. It does not show up under any other section (assignments, discussions, etc). Any assistance is greatly appreciated.

Have you contacted Apple support?
I don't know if these will work, but you could have the student try the following:
logout of his or her iTunes U (i.e., iTunes Store) account using Settings
force-quit iTunes U
relaunch iTunes U
sign in to the newly launched app when prompted
I hope that helps!

Talent Search not showing name for one employee

Hi
I am facing issue in talent search, it is not showing employee name after search. This is happening only for one user, means surely it will be master data issue,application is working fine.
But now I want where to see that data maintained.
Please help with this if anyone knows about it.
-Yogesh

Hi Yogesh,
If it is only one employee that it isn't showing for then it could be authorizations. Some other suggestions are:
- Incorrect or no name for CP object
- Incorrect authorizations of user used for delta-indexing
My guess would to be to look at authorizations first.
Best regards,
Luke

Breadcrumb Seperator Not Showing Up on One Tab's Pages Only

Similar Messages

Maybe you are looking for