Break is longer than total working time in shift in OP36
Dear all,
When I am creating default capacity with t code OP36, the system gives me message "Break is longer than total working time in shift." Why is this happening as I enter start time, finish time and length of breaks as 07:30:00, 16:00:00, 00:45:00 resp. Pl give ur valuable in puts.
Hi
This message will be displayed if you specify only start, finish and break times without value in Capacity utilization.
You will not get that message if you specify capacity utilization. Specify 100 there if that capacity utilization rate is 100%
Regards,
Krishna Mohan
Similar Messages
-
Cloud and PS Touch - longer than the free time?
Hi,
i couldn´t find anything about it, so i just want to use PS Touch on my Nexus tablet. So i have to register to the cloud, but do i have to pay for it or can i use PS Touch longer than the 30-free days?
thx for ur answers.
GreetingsThanks thats all i wanted to know so then i will try PS Touch
-
Length of Burn longer than shown on time line in FCP 4.5 HD
Have an 8 minute-30 second movie. When I send it to compressor then to DVD Pro 3 it burns at 41 minutes and 15 seconds and takes about 3 and a 1/2 hours
to burn. The time line in FCP 4.5 HD shows ,as stated 8' 30". When the disc is played back it goes to black after the 8'30" movie but continues to run out to 41'-15". Help is greatly appreciated.Check your FCP timeline and that you do not have any stray clips past the 8:30
Or just mark 8:30 as out point, export as self contained using In/Out points and encode that - but I would bet there is something in the timeline in FCP -
Any help would be appreciated
Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Any way to sample segment length longer than loop iterations w/o shift registers?
Hi all,
My loop iterates approx every 0.06s and now i've been asked to add to the program a function which will sample the most recent 3s of data and return the max/min value for two of the signals. I can think of a programmatically clumsy way to do this with shift registers- take the max/min for each iteration, save-repeat-compare until you have enough iterations to fill 3s of time. But I can't help but think there has to be a cleaner(better?) way to do this.
Any help?
Thanks
Solved!
Go to Solution.Hi there,
Try looking into a circular buffer.
http://zone.ni.com/devzone/cda/tut/p/id/7188
Once you've determined how often you're putting entries into the buffer, you'll know exactly how big of an array to grab and do the Min/Max on.
Another option is to use a circular array.
http://decibel.ni.com/content/docs/DOC-3414
I would set this up to function a little like a Functional Global or an Action Engine. The subVI would then be used in your DAQ loop to "stack" new data. And then called in another loop or part of your code to be read every three seconds.
Patrick Allen -
Cancelling PeopleSoft job if running longer than max time
We have some PeopleSoft jobs that we want Tidal to automatically cancel if they are still running after 2 hours, then automatically set the job to Completed Normally so the next job in the jobstream will start running. We tried using a Job Event triggered by "Job running longer than its maximum time", with Selected Action = "Set To Completed Normally". The problem is that it sets the job to completed normally on Tidal, but the job continues to run on PeopleSoft. In other words, it's not cancelling the job.
Next, we changed the Selected Action to "Cancel/Abort". This worked in terms of cancelling the job on PeopleSoft, but we can't figure out how to automatically set the job to Completed Normally on Tidal after the job is cancelled. There is an Event Trigger for "Operator cancelled the job", but apparently the event isn't triggered if Tidal cancels the job. We also tried using Event Trigger = "Job completed", but that didn't work either since apparently Tidal doesn't consider a job in Aborted status as completed.
Anyone have any other ideas on how to automatically cancel a PeopleSoft job and then automatically set the Tidal job to Completed Normally? Thanks.Hello Richard,
I would use the sacmd (windows) or the tesmcmd(Unix) to interact with the given job so to set it to whatever status you want ;
- You have to first let the event Cancel/Abort it if running longer than expected by using the built in function (Cancel)
- Then using the same event you need to trigger another job action that has the above tesmcmd command to set the job to Normally completed; for this you may need to create a new job that calls the tesmcmd/sacmd and then use jobset command.
now you need to create a job action that triggers that job which will allow you to override the command parameters especially the RunID of your failed job.. hope i was able to get it right unless if you already figured that out.
-rami -
In Lion Apple's Mail sound works for about one half a day each time I close it and then open it but it lasts no longer than that. What is the fix?
Try disabling the IDLE switch in the account's Advanced preference panel.
-
I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.
Ignore. I figured it out:)
-
2 of my movies are no longer working in my iTunes or on my iPod Touch, One doesn't play at all and the other gets to about 29:00 than stops working and I don't want to buy them again. Then also when I added a non-iTunes movie and tried to have iTunes make an iPod/IPhone version it gave me error -4. What's happening to my movies?
I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.
-
Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
Their service report No. 36679.
Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.Who exactly are you addressing your screed to
There are no Apple Staff on this forum ,it is User to User -
Quad with 7800GT boot time longer than other cards?
my quad with raptor 74gb and 3gb of ram plus 7800gt takes 49 seconds to boot consistently. fresh system. I saw over at barefeats.com that theirs boots in 29 seconds but without the 7800gt. can anyone who has both or has access to both confirm that the 7800gt indeed is the factor adding 20 seconds to my boot time?
thanks.
-steveHow long is it before you see the first apple?
The time period between the apple and a complete desktop is more hard drive speed related and this is what barefeats may be refering to as boot time.
The time period between "dong" and first apple is when the machine checks the RAM and other things, perhaps the more RAM, the more time?
Just so happens the "dong" to first apple is about 20 seconds on my machine and my total boot time is about 30 seconds. -
I have a 3Gs iPhone, which I've had for 1 year 83 days and the home button si faulty. I have checked on the internet and this seems to be a common issue.
I have a contract with O2 for 24 mouths due to run out March 2012 but the phone was bought from Carphone Warehouse.
I have been to O2 and they say it's out of the Apple warranty and therefore I will have to pay for a repair. They also have now said because it came from CPW they will do nothing for me.
I have been to Apple and they say the same thing that I have to pay for the repair as it's out of warranty
My query is surely I can expect a phone that has been looked after should last longer than 83 days? Therefore under the sale of good act I should get a repair or replacement for free???
I am now paying for a contract where the phone doesn't work!Good luck with that. Most of the world does not have anything like what you believe your "sale of goods act" is supposed to do. It sounds like you expect it to extend the warranty on a Product from Apple until your contract with an entirely different company is complete. I think you'll find that you are misinterpreting that law. The exception may be if you purchased the phone from the carrier and the law is written in such a way as to require them to replace the device if it fails during the term of the contract, though I doubt that will be the case either.
-
Hi all,
Off late we have discovered that content crawling is taking longer than expected also overlapping to next scheduled too. Literally no crawl logs seen for hours. No entry in crawl logs. Is there anyone out here having similar issue? Please share a solution
if any found.
My farm is implemented with MOSS 2007 SP2 Ver no 12.0.0.6554
There is not packet drop between index server, App and SQL server/Cluster
Thank you in advance,
Reach Ram
Ramakrishna Pulipati SharePoint Consultant, Bangalore, INDIAI believe this is ready for submission for the Time Machine forum.
As noted, it does not cover diagnosis and correction of specific problems or errors, as that would seem to be better handled separately.
It also doesn't cover anything about Time Capsule, for the very good reason that I'm not familiar with them. If someone wants to draft a separate post for it, or items to add/update here, that would be great!
Thanks very much. -
My new iPad3 with wifi- is taking a really long time to download,much longer than my iPhone. Does anyone know what I can do?
Or is that just normal.slow Internet connection.
-
Since I upgraded to Adobe Created Cloud, my photo editing processes are taking more than 10 times longer than they used to. Why would this be?
You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Maybe you are looking for
-
Create a report with two queries. First query has three groups, second has one that is linked to the detail of the first query. Then go into report wizard and define the report. Problem: Detail sections come out in freeform format. How do I get them
-
How do I make a new album in iPhoto for iPad?
Maybe I'm missing something obvious but I can't figure out how to make a new album or event in iPhoto. Is there a key somewhere?
-
For the children we turned on the restrictions on certain apps/features for iTunes and restricted all access to App Store (kids playing with phone, never know what they might do) but now want it off but can't remember pin? How can I find out about re
-
Cdrom not working and need to format ibook
hi there had a search but couldnt find anything directly. my g3 ibook, 900mhz power PC G3 laptop has a faulty cd rom and no longer works, and i need to format the ibook to delete any personal and data so i need to format it ready to sell. i have and
-
SAP BW(NW2004s) Development and SAP BW Production(NW2004s) on Single Server
Hello Experts, Currently we are having BW development and BW production on seperate IBM iseries servers with AS400. Can we have dev and prd on same servers. What would be the implications of this landscape. Please provide me the links for documentati