Break-out-box does not respond, but is powered on

Hey!?Big Problem... my break-out-box doesn't work any more. There is no possibility to use the mute function, IR-control, CMSS-Control or to do anything else with it... simply dead, although it is powered on. LED is green and at the optical out i have a red one shining. I tried cleansweap and reinstall drivers, nothing changed the situation. Cable are correctly connected, i didn't change the last years. I'm also missing the extended connection possibilitys in my "sound and speakers" options... formerly there where a lot more, now there are only?fi've or six controller bars. WHAT HAS HAPPEND? Is it normal that there are three steps with the CMSS options like: CMSS, CMSS2 and STEREO SOUND? I remember that formerly there was also CMSS3... correct? MAybe this is another wrong thing... Any hints regarding this box and controller problem?Thanks a lot in advance,Alabaster

Try doing a clean reinstall (i.e. backup data, format and reinstall) of Windows yet? Sounds like something else apart from the drivers got corrupted.

Similar Messages

  • My iPad 3 screen has gone completely black and does not respond

    MY iPad 3 screen has gone completely blank (blacked out) and does not respond to either of the power buttons.
    ANy suggestions?

    If the battery is not flat, try a reset.
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Audigy 4, digital out would not work, now external box does not power

    I recently purchased a audigy 4 sound card. At first it was almost as if there was a loose wire somewhere. Sometimes the external break out box would power up and sometimes it would not. There was no loose wire and it now no longer powers up at all. The only thing that was worse than the intermittent power up was the digital out on the box. First of all I was told that you could use the spidf out on the box to a receivers digital in, this never worked now matter what settings I tried. I was then told to try the mini out. So I went and bought a mono mini out, that was a joke, didn't fit right rarely worked. I then went and bought a mini stereo plug to RCA out, that fit right and worked a few times, It no longer works at all.
    I had the settings set up correctly with the spidif passthrough.
    Has anyone else had any problems getting the digital out to work with a receiver?
    The analog works fine, but just like the audigy mp3 the bass output for my sub is weak and almost nonexistent. I have a nice hifi/ht system I am trying to get this card to work with.

    hello there!
    i have the same problem - when i use the equalizer i can save a preset without problems,
    but if i reboot the pc i first have to open the equalizers window to make the equalizer work. without having opened the equalizer window it seems to be not activated.
    does anybody have an idea how to fix that problem?
    greetz,
    doolak

  • Hello The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when  I try t

    hello
    The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when  I try to open it is no use. OS Y 10.10.2 (14C1514)

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Flashplayer pop up box  "Requesting permission to store info on my computer" does not respond and will not go away. How do I get rid of it. It is most annoying as it stays right in the middle of the screen.

    Flashplayer pop up box  "Requesting permission to store info on my computer" does not respond and will not go away. How do I get rid of it. It is most annoying as it stays right in the middle of the screen.

    Move cursor onto video.  Right click.  Click Settings,  Click the "never ask again" box. Then click Close.  That will work.
    For some reason, that always worked for me, but in the last two days, it does not work, and it seems to freeze on the
    video.  See, if it works for you.

  • TS1559 wi-fi does not respond ; in settings when i get to screen: chose a network even that wi-fi is on the whole screen freezes and does not respond to touch. i have to press home button to go out. settings point is not coresponding either (in top left c

    wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?

    noelani72 wrote:
    I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
    Message was edited by: noelani72
    Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
    My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
    Good luck.

  • Connect button in excel does not respond with server connection dialog box

    Hi all,
    I have installed Essbase 11.1.1 spreadsheet client and when I try to connect to the server from the excel add in using Essbase->Connect option, the "Essbase System Login" dialog box does not pop up. Also no error messages are displayed.
    OS is Windows XP and windows 2000 and excel version is 2000 and 2003
    I tried out with various options in essbase and in excel but nothing worked.
    Can anyone help me in this regard.
    Thanks,
    Raja

    Hi all,
    I have installed Essbase 11.1.1 spreadsheet client and when I try to connect to the server from the excel add in using Essbase->Connect option, the "Essbase System Login" dialog box does not pop up. Also no error messages are displayed.
    OS is Windows XP and windows 2000 and excel version is 2000 and 2003
    I tried out with various options in essbase and in excel but nothing worked.
    Can anyone help me in this regard.
    Thanks,
    Raja

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Mapquest sign in box does not appear in Firefox but does in Internet Explorer. Why? Have disabled add ons but no luck.

    The sign in box does not show up on Mapquest when I use Firefox. If I use Internet Explorer, the sign in box appears. I disabled the Firefox add-ons thinking there might be a conflict but no luck. Mapquest support is at a dead end, too, especially with it working in IE but not in Firefox. Suggestions?

    Can you post a link to that login page or is this a pop-up window?

  • My Safari screen is grayed out.  It does not respond to touch.  How to bring it back to life?

    My Safari screen is grayed out.  It does not respond to touch. How can I restore it back to life?

    Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad by holding down on the sleep button until the red slider appears and slide to shut down. then hold the sleep button until the Apple logo appears to start up.
    You can also reset the iPad by holding down on the sleep button and home button at the same time until the Apple logo appears (takes about 10 seconds) - ignore the red slider.
    Message was edited by: Demo

  • TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

    My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

    I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
    Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

  • My ipod touch wont turn on i tried everything but it does not respond , I dont know what to do, please help me !

    My ipod touch is not working i tried everything but i cannot turn it on. I was not using for about 2 weeks and I remember the last time I used it it was working perfectly but a day before today I tried to turn it on but i couldn't I tried by pressing both bottoms but my ipod does not respond ! I really need help !

    See Here for
    Frozen or unresponsive iPod touch
    Make sure the Battery is Charged...
    Also, Try This... You will Not Lose Any Data...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the iPod On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My search box does not display suggestions even though it is set to (it displays past searches, but not suggestions). I have looked at the FAQs and everything is set for it to show suggestions.

    My search box does not show suggestions although it is set to show suggestions.

    MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly.  I would think that someone would be intelligent enough to do that before buying a new device, but......
    iMessage could be an activation issue or a network issue.
    Have you tried Settings > General > Reset > Reset Network Settings?
    Does iMessage work consistently on Wi-Fi?

  • Required = true, but Javascript alert boxes Does Not fire ?

    Hi,
    On my ADF Form (af:form), I have set my attribute : required = true on the adf faces page. (on the entity object, mandatory = true)
    But when I press Submit, I do not get any Javascript alert boxes fired, instead, I just see server side validation error.
    Why the Javascript alert boxes does not get fired ?
    Where is the setting ?
    Thank you for your help,
    xtanto

    Hi Frank,
    I use JDev 10.1.3.1 and it does not work.
    Yes , the required field similar to #{bindings.ManagerId.mandatory}
    I even try to change it to 'true', still no Java script alert, just the server side error.
    What is the possibility ?
    Thank you,
    xtanto

  • Trial Version of elements 13 running on latest IMac 27 inch.  Move the mouse and it is time out.  Doesn't matter where on the window the mouse is. The program does not respond quickly at all. Takes ages to do anything with it.  Any suggestions?

    I am running a trial version of Elements 13 on the latest IMac 27 inch.  Any move of the mouse and it is time out.  Doesn't matter if the mouse is trying to do an edit or just moving across the window.  The program does not respond very well at all.  I am wondering now if I should bother purchasing the program. 

    How much ram do you have? Did you recently import a bunch of photos into the organizer? PSE will be slow till it's through cataloguing them, which can take some time for large number of images.

Maybe you are looking for