Break statement not working in switch case

Hi,
I've run into this problem multiple times and have looked up the syntax for a switch statement. The problem with the code below is that when it goes into the first case, it executes the break statement but still executes the next case instead of breaking out of the switch case. Can anyone see whats going wrong?
try
            switch (columnProps.getCellType())
                 case (ExcelConstants.CELL_TYPE_STRING):
                     excelCell.setCellValue(iterator.getCurrentColumnStringValue());
                     break;
                 case (ExcelConstants.CELL_TYPE_NUMERIC):
                     excelCell.setCellValue(iterator.getCurrentColumnIntValue());
                     break;
catch (Exception e)
System.out.println(e.toString()):

it executes the break statement but
still executes the next case instead of breaking out
of the switch case. Can anyone see whats going wrong?You can if you put in traces (print statements) in proper places. This will allow you to exactly follow the switch behaviour.

Similar Messages

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Not sure why line break is not working

Hi all,
Here is part of my simple Swing application:
String text1 = "hello";
String text2 = "world";
String text3 = text1+"\n"+text2;
// have also tried (String text3 = text1+"\n\r"+text2;)
displayField.setText(text3);I supposed that the text3 in the label field (displayField) would display like this:
hello
world
But not, the text3 just displayed in the same line like this instead: helloworld.
I am not sure why the line break is not working.

Use HTML for a multiline JLabel.// String text3 = text1+"\n"+text2;
String text3 = "<html>" + text1 + "<br/>" + text2 + "</html>";db

I've moved my Aperture library to another computer, and masters are referencing an old path name. How can I update these references? Reloctating masters does not work in this case :(

I've moved my Aperture library from one computer to another using Finder.
I merged the library with one which was already on the computer.
Now, the photos I imported have reference to the old path name on my old computer.
How can I update these references as "Relocate Masters" does not work in this case?

Just one suggestion to be able to reconnect all at once:
Create a smart album containing the images with missing masters:
File -> New -> Smart Album, and add a rule: File Status is "Missing" (or File Status is "offline")
Then select the images in this album and go to the File menu:
and select: File -> Locate referenced File
If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

[svn] 1720: Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints .

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Select statement not working

hi to all,
I am trying to write use inner joining . here is code
DATA:tabname LIKE dd02L-tabname,
     table_disc LIKE dd02t-ddtext.
SELECT dd02ltabname dd02tddtext INTO (tabname,table_disc)
    FROM dd02l INNER JOIN dd02t on dd02ltabname = dd02ttabname
          WHERE dd02tddlanguage = 'E' AND dd02ltabclass = 'TRANSP'
                            AND dd02L~tabname = 'ZANKI*'.
    endselect.
      write : tabname.
I also checked in tables dd02t and dd02l for the table zanki* and data available in both table . but here select statement not working .do u have any idea about this. thank you

Hi,
I executed the ur inner join conditin by commenting 'z*' it's working fine.
I think where condition is not getting satisfied so u r not getting any data.
Please conform in where condition you need * 'AND'* or OR
I change decalration as below.
DATA:tabname    type TABNAME,
      table_disc type AS4TEXT.
SELECT dd02l~tabname
       dd02t~ddtext INTO (tabname, table_disc)
FROM dd02l INNER JOIN dd02t on dd02l~tabname = dd02t~tabname
WHERE dd02t~ddlanguage = 'E' AND
      dd02l~tabclass = 'TRANSP'AND
    dd02L~tabname = 'ZANKI*'.
endselect.
write : tabname.
Regards,
Pravin

IPhone speaker does not work when switching call to hands free option

having problems with IPhone speaker, not working when switching phone calls to speaker mode, any suggestion?

Same problem - I was on the phone last night and the speaker switched off and can't figure out what happened. I tried to reset the phone, no sound is working. I can hear a phone call if I hold it up to my ear. Very frustrating as my phone is less than 3 months old. Tracy

Case when statement not working

hi there, I am trying to work out how to get my case statement to work.
I have got the following code.
select pthproto.pthdbo.cnarole.tpkcnarole, pthproto.pthdbo.cnaidta.formataddr as formataddr, cnaidta.dateeffect as maxdate, isnull(cast (pthproto.pthdbo.cnaaddr.prefix1key as varchar (50)),'') + ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix2key
as varchar (50)),'')+ ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix3key as varchar (50)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.houseidkey as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component1
as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component2 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component3 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component4
as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component5 as varchar (100)),'') as mailaddress, row_number() over(partition by pthproto.pthdbo.cnarole.tpkcnarole order by cnaidta.dateeffect desc) as rn into #address from pthproto.pthdbo.cnarole
inner join pthproto.pthdbo.cnaidty on cnarole.tfkcnaidty =cnaidty.tpkcnaidty inner join pthproto.pthdbo.cnaidta on cnaidty.tpkcnaidty = cnaidta.tfkcnaidty inner join pthproto.pthdbo.cnaaddr on cnaidta.tfkcnaaddr = cnaaddr.tpkcnaaddr order by cnaidta.dateeffect
select *, case when mailaddress is not null then mailaddress else formataddr end as test from #address where tpkcnarole = '18306695'
The case when statement is struggling with how i have created the column mailaddress. As it does seem to understand when it is null. In the example I have got there is no value in any of the columns to create
the mailaddress. Hence why I am referencing it from elsewhere. Due to having a way on the system where it picks up data from 2 different places. The mailaddress is always correct if there is one, hence why
trying to reference that one first. So how do i change this case when statement to work ?

It's ok I have fixed my own problem
when
(mailaddress
is
null
or mailaddress
=
then formataddr
else mailaddress
end
as test
case

MDX simple case statement not working?

hi all - any idea what is wrong with this MDX statement? it is returning blank. I am trying to add a calculated measure using the below code but it is not working. thanks for the help.
CASE WHEN [Accounts].[Account Name].CURRENTMEMBER = "Cash" THEN
([Dates].[Hierarchy].currentMember.lastChild, [Measures].[Measures].[Amount]) END

If you are checking for the 'Cash' member of the Account Name hierarchy, do you need to do something like this?
CASE WHEN [Accounts].[Account Name].CURRENTMEMBER IS [Accounts].[Account Name].[Cash] THEN([Dates].[Hierarchy].currentMember.lastChild, [Measures].[Measures].[Amount]) END
Regards,
MrHH

Hide statement not working

Hi experts,
i am using hide statement but it is not working..The problem with it is that after line selection the variable on which i have used hide is carrying the last value of internal table always..<< Removed >>
Regards,
Raman
Edited by: Rob Burbank on Jun 30, 2009 10:41 AM

I am sending a test program with same problem...iin this after line selection the field variable emp-name is displayin only last entry of internal table...
*& Report ZBASICX12
REPORT ZBASICX12.
INITIALIZATION.
DATA: BEGIN OF ITAB OCCURS 0,
        EMPID TYPE ZTEMP-EMPID,
        EMPNAME TYPE ZTEMP-EMPNAME,
        END OF ITAB.
START-OF-SELECTION.
SELECT EMPID EMPNAME FROM ZTEMP INTO TABLE ITAB.
SORT ITAB BY EMPID.
LOOP AT ITAB.
    WRITE: / ITAB-EMPID HOTSPOT.
    HIDE ITAB-EMPID.
ENDLOOP.
END-OF-SELECTION.
AT LINE-SELECTION.
CASE SY-LSIND.
    WHEN 1.
      WRITE: ITAB-EMPNAME.
ENDCASE.

SQL Statement not works using functions or subqueries-MAXDB

Hello All,
I created an ABAP program to select information about country(table: T005) with the country names (Table: T005T). I tried to create a sql query with a sql subquery to select everything but for some reason that I don't know it doesn't work. Please find the query below.
DATA:
resu        TYPE REF TO cl_sql_result_set ,
stmt         TYPE REF TO cl_sql_statement ,
qury        TYPE string .
           qury = `SELECT land1, spras, `
           &&       `(SELECT landx `
           &&         `FROM SAPNSP.T005T `
           &&         `WHERE mandt = '` && sy-mandt && `' `
           &&           `AND spras = 'EN' `
           &&           `AND land1 = ? ), `
           &&       `(SELECT natio `
           &&         `FROM SAPNSP.T005T `
           &&         `WHERE mandt = '` && sy-mandt && `' `
           &&           `AND spras = 'EN' `
           &&           `AND land1 = ? ) `
           &&        `FROM SAPNSP.T005 `
           &&        `WHERE mandt = '` && sy-mandt && `' `
           &&          `AND land1 = ? `
           &&        `GROUP BY land1, spras` .
resu = stmt->execute_query( qury ) .
Well, the query above works but the fields LANDX and NATIO are in blank in ALL THE CASES, even with information registred in table T005T.
So, exploring the SDN forum and after read some documents regarding ADBC, I create a function to handle this sql select and get the correctly the missing informations, but, still don't work. Please find the function below:
CREATE FUNCTION select_landx (land1 CHAR(3)) RETURNS CHAR(15)
AS
VAR landx CHAR(15);
DECLARE functionresult CURSOR FOR
SELECT spras, land1, landx
     FROM SAPNSP.t005t
     WHERE spras = 'EN'
         AND land1 = :land1;
     IF $count IS NULL THEN <- | $count is always 0, my SELECT
       BEGIN                                 it's not work but I don't know why
         CLOSE functionresult;
         RETURN NULL;
       END
     ELSE
       SET $rc = 0;
       WHILE $rc = 0 DO
       BEGIN
         FETCH functionresult INTO :landx;
       END;
     CLOSE functionresult;
     RETURN landx;
Calling the function in a SQL statement:
DATA:
resu        TYPE REF TO cl_sql_result_set ,
stmt         TYPE REF TO cl_sql_statement ,
qury        TYPE string .
           qury = `SELECT land1, spras, select_landx(?) landx `
           &&        `FROM SAPNSP.T005 `
           &&        `WHERE mandt = '` && sy-mandt && `' `
           &&          `AND land1 = ? `
           &&        `GROUP BY land1, spras` .
resu = stmt->execute_query( qury ) .
Any comments ?
Best regards,
Arthur Silva

Hello,
Thank's a lot, it works. It's funny because the given solution works using only abap codes.
It may be happens because the abap interpretor send the sql statement to the db interface that handle the code in the another way.
Thanks again, it was driving me crazy.
Best regards,
Arthur Silva

Trackpoint does not work after switching from the tablet to laptop mode.

I use my tablet to run a smartboard. Sometimes when I switch to the tablet mode and back by reversing the display, the trackpoint and mouse keys stop working. The touchpad below it still works. I am running windows 7. I have gone into the control panel, under mouse, and both the trackpoint and touchpad are still both checked. ?? When I restart the functions return.

Hi Remaxjoe,
Welcome to Lenovo Community Forums!
I’m really sorry to hear that trackpoint is not working properly in your Lenovo system.
I would suggest you to download the Ultranav drivers for your system and install it.
Below is the link to enter downloads page and install the Ultranav driver.
• Support Drivers & Software downloads
Please click on "QUICK PATH”, enter your system model and select the exact model depending on the MTM number of your device.
Spoiler (Highlight to read)
You can refer here for further information.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Import statement not working

i created a package named "pkg1", it contains 4 classes named
1) Base
2) Subclass1 (extends Base)
3) Subclass2 (extends Subclass1)
4) Subclass3 (extends Subclass2)
now when i try to use the package using
import pkg1.*
and in main method, if i write,
Subclass3 obj = new Subclass3();
It does not work, error msg says "makes sure Subclass3 is in the correct sub-directory."
However, when i tried
import pkg1.Subclass3;
It worked fine, Why is then import pkg1.* not working??

I don't think that's going to help.
Try and see.
When the java compiler looks for a class
pkg1.Subclass1 it looks for pkg1\Subclass1.java
relative to the current directory and
pkg1\Subclass1.class relative to each directory on
the classpath.
When the javac compiler (at least version 1.4) looks for a dependent class, it looks in the Classpath directories. It only looks relative to the current directory if the current directory is in the Classpath. When it looks for a dependent class, it looks for both .java and .class files. If it only finds a .java file or the .java file is newer than a .class file, it will try to compile the file.
You need to compile from the directory above
pkg1, in this case (unfortunately) d:\
This makes it sound like it is a requirement to compile from the directory. It isn't required.

Active state not working in scrolling site (with anchor links)

I'm design a scrolling site with anchor links and an horizontal menu on the top.
when i publish the site and click on the menu buttons the site scrolling to the place of the anchor but the active state in the menu is not working.
now... when i leave the main page (were the scrolling site is) and then return back to it all active states are working perfectly
anyone have this bug? or any one know how to fix it ?

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Fan is not working.. switching off automatically every 10 mins

fan is not working.. wat to do...my lapi is switing off after every 10 mins

Hi there ,
I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number? This will help me find the specifications for your specific HP Pavilion Notebook and what the part number is for the proper fan. If you need more immediate assistance or would like to speak to someone about a fan replacement, please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately.
Thanks.

Break statement not working in switch case

Similar Messages

Maybe you are looking for