Break up instant movie not possible

In a video tutorial I have seen, that I can break up an instant movie by clicking with the right mousebutton on the instant movie in the cutting window. But I can not find the menupoint in the dropdownmenu. It is not there.
Can anybody help?

Are you right-clicking on the InstantMovie on your timeline (not in the cutting window)? If so, you should see the option to Break Up InstantMovie.
If not, please post a screen capture of your workspace so we can see what you're doing.

Similar Messages

Goods movement not possible with mvmt type 991

Hi,
            As per requirement I need to create a GR for Purchase order wise. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message.
error: Goods movement not possible with mvmt type 991
LOOP AT gt_outtab1.
gt_outtab1-gr_wght       =   gt_outtab1-gr_wght.
   MOVE: gt_outtab1-matnr            TO gt_item-material,
          gt_zseed_po_qty-werks       TO gt_item-plant,
          gt_zseed_po_qty-lgort       TO gt_item-stge_loc,
         '901'                        TO gt_item-move_type,
          gt_outtab1-gr_wght          TO gt_item-entry_qnt,
          'B'                         TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor,
          gt_outtab1-ebeln            TO gt_item-po_number,
          gt_outtab1-ebelp            TO gt_item-po_item.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE bqty IS NOT INITIAL.
    MOVE: gt_outtab3-bmatnr           TO gt_item-material,
          gt_zseed_po_qty-werks        TO gt_item-plant,
          gt_zseed_po_qty-lgort      TO gt_item-stge_loc,
         '991'                        TO gt_item-move_type,
          gt_outtab3-bqty             TO gt_item-entry_qnt,
          ''                          TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor.
    APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE pqty IS NOT INITIAL.
    MOVE: gt_outtab3-bmatnr           TO gt_item-material,
         gt_zseed_po_qty-werks        TO gt_item-plant,
          gt_zseed_po_qty-lgort      TO gt_item-stge_loc,
         '942'                        TO gt_item-move_type,
          gt_outtab3-pqty             TO gt_item-entry_qnt,
          ''                          TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor.
    APPEND gt_item.
ENDLOOP.
***********Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = gs_header
      goodsmvt_code    = gs_code
    IMPORTING
      goodsmvt_headret = gs_headret
      materialdocument = gs_retmtd
      matdocumentyear = gs_year
    TABLES
      goodsmvt_item    = gt_item
      return           = gt_return.
so could you please let me know which are the parameters I need to pass to create GR?
regards,
tarun

Hi,
Go to T.code OMJJ . Give your your movement type 991. Check the allowed transaction and all the details in your left hand side and the settings done.
Thanks
Arbind

Idoc mbgmcr02 movement type 311 .. goods movement not possible w/mvmt type

i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
if i do the exact same thing with the transaction migo...works fine...
am i missing something????

i am trying to move material from one location to another using IDOC MBGMCR02..
I am entering the following...
E1BP2017_GM_Code=04
in e1BP2017_GM_ITEM_Create
Material=CON2020
Plant=3000
Stg_Loc=0001
Move_Type=311
Entry Qty=001
Move_Mat=Con2020
Move_Plant=3000
Move_Stloc=0002
Mvt_Ind=??????
In the Mvt_Ind I have tried E,K,M,Q
the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
Is E1BP2017_GM_CODE = 4 correct???
What should be the Mvt_Ind???

Goods movement not possible with movement type 702

Hi experts,
I have created a new movement type 702 (a copy of 602) for return delivery from customer.
When I create delivery I did not face any issue. However while doing post goods issue, I get error
"Goods Movement not possible with mvmt type 702."
Is there any configuration missing for post goods issue?
Please advise.
Thanks,
Pri

DEAR,
AFTER CHECKING IN "OMJJ" ...SEE WHETHER YOU HAVE NOT BLOCKED THIS MOVEMENT...
ALSO SEE IN OPTION WHETHER ALL TRANSACTIONS HAVE BEEN ENTERED LIKE
"MI01"
"MI02"
"MI31"
"MI07"
"MI37"
WE ARE PERFOMING THIS ACTIVITY USUALY SO PLZ PERFORM IT,,WE ACTUALLY BLOCK THIS MOVT TYPE AFTER ARE PHYSICAL INVENTORY...
OR EVEN IF THESE DOESNT WORK..
GO TO "SU01" IN WHICH PUT THE USER ID AND CHECK IN AUTHORISATION WHICH PROFILE IS ASSIGNED TO IT..
REGARDS
REWA

KANBAN - STO (error : Goods movement not possible with mvmt type 351)

Hi,
I have configured KANBAN STO in the system which is working fine.
I am able to empty the bin and create STO (purchase orders)
But when I select a bin and try to make it full, system gives error message:
"Goods movement not possible with mvmt type 351"
In KANBAN STO replenishment strategy, I have used movement type 101,
I m little confused from where this 351 movement type is coming from.
Please help resolvethis issue.
Pavan

Hi,
Below is the entire message:
Goods movement not possible with mvmt type 351
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
Pavan

Goods movement not possible with mvmt type 961

hi all,
i got a error as Goods movement not possible with mvmt type 961
Can any body help me to know whether i can create GR for mvmt type 961.
mvmt type 961 is for third party transfer

Getting errors while using PI_GOODSMVT_CREATE' with 561+K

Goods movement not possible with mvmt type 561-error

Dear All,
I am using bapi BAPI_GOODSMVT_CREATE for goods movement. i am gettining Goods movement not possible with mvmt type 561 error.
please suggest me. i am using serial number also.
regards,
satish

Getting errors while using PI_GOODSMVT_CREATE' with 561+K

'Goods movement not possible with mvmt type 102'

Dear Experts,
I have to reverse the GR and I am using BAPI -> BAPI_GOODSMVT_CREATE and passing below information but I am getting error message as 'Goods movement not possible with mvmt type 102'. Could any one please tell me what would be the possible reasons to get this error and how can I fix this.
goodsmvt_header-PSTNG_DATE = 20110705
goodsmvt_header-DOC_DATE = 20110705
goodsmvt_code-GM_CODE = 06
goodsmvt_item-PLANT = 1400
goodsmvt_item-MOVE_TYPE = 102 <<< Reversal movement type
goodsmvt_item-ENTRY_QNT = 02
goodsmvt_item-ENTRY_UOM = SET
goodsmvt_item-PO_NUMBER = W299999508
goodsmvt_item-PO_ITEM = 0010
goodsmvt_item-MVT_IND = B
goodsmvt_item-XSTOB = ''. << space to use reversal types
Thanks in Advance
Venkat

Hi Please provide Material Document, Document Year and Posting date as shown below
MATDOCUMENTYEAR = DOC_YEAR.
GOODSMVT_PSTNG_DATE = POSTING_DATE.
MATERIALDOCUMENT = MAT_DOC
CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
    EXPORTING
      MATERIALDOCUMENT          = MATERIALDOCUMENT
      MATDOCUMENTYEAR           = MATDOCUMENTYEAR
      GOODSMVT_PSTNG_DATE       = GOODSMVT_PSTNG_DATE
    GOODSMVT_PR_UNAME         =
   IMPORTING
     GOODSMVT_HEADRET          = WA_GOODSMVT_HEADRET
    TABLES
      RETURN                    = IT_RETURN
    GOODSMVT_MATDOCITEM       =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT = 'X'.

Cannot cancel a GR: Goods movement not possible with mvmt type 502

Hi,
I was trying to cancel a goods receipt for an inbound delivery. However I ran into trouble with the following error message.
Goods movement not possible with mvmt type 502 .
Is there some configuration that I would be needed to make before I can cancel a goods receipt?
Thanks,
Arup

To expand on the above some,
check the mvmnt type used for the origanal GR and use the coresponding reversal mvnmt type.
or confirm for us that the origanal receipt was in fact a 501??
Edit: or use migo to cancel the GR doc.
cancelation > material doc
this will only be possible if the stock is still available (same status as well)

Goods movement not possible with mvmt type 109

Hello All!
I have following problem. I try to book the goods receipt with VL32n and movement type 109 and get following message: M7096 Goods movement not possible with mvmt type 109
- First I created a PO with Confirmation Control Key Inbound delivery
- Goods receipt ist booked with movement type 107 with MIGO
- I created an inbound delivery with movement type 109
Finally I want to book with VL32n the goods receipt, but the booking fails with error message 109. Any idea why.
Regarding some OSS notes, I thought that it could work this way.
Hoping for help,
Barbara

i am not sure that i read you correctly
the process for inbound delivery is
create PO; in PO conf control key set to inbound del.
create inbound del in vl31n
do MIGO on inbound del
if the inbound del is with 107 mvmt type the GR will bring it to valuated block stock
do 109 to move it from valuated block stock to unresticted stock.

Fleet Equipment-IFCU-Goods movement not possible with mvmt type 201

Hi Experts,
When I am trying to post the movement of consumed Fuel & Distance by IFCU,the error comes 'Goods movement not possible with mvmt type 201'.
Goods movement not possible with mvmt type 201
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
I cheked some of old post but not solved.I have also maintained IFCU in OMJJ for allowed transaction for 201 & 202 movement type but still not working.
Please suggest me.

Hi Maheswaran,
Thanks for your reply.I have already configured,maintained the values and setting.
Please check and update if any other solution.
Regards,
Baiju

Instant Movie not finishing (Premiere Elements 9 + Mac OS X 10.10.2)

I use Premiere Elements 9 with a Mac (OS X 10.10.2) and Instant Movie does not complete! It goes up to 100% at applying the settings of the Instant Movie and it just will not move on. With previous versions of OS X it used to work!
Any thoughts?
Can anyone with a Mac with the latest OS X (10.10.2) and Premiere Elements 9 try to reproduce this problem?

Stavros F
Thanks for your reply.
I am at a cross road as to which troubleshooting path would not generate more problems than you already have. Right now you report
that all seems to be working except Instant Movie.
If the deletion of the Adobe Premiere Elements Prefs file did not impact the Instant Movie problem, an uninstall, free
ccleaner run through, and reinstall with antivirus and firewall (as appropriate for Mac) should be considered. But there is no
guarantee that you might run into installation problems when you go to reinstall 9.0 and then 9.0.1. The next thought regarding
permissions might be the next step.
I am not sure if it is valid to look at this as a permissions issue. I have seen an assortment of Elements Mac issues addressed
by Repair Permission....the path might be Application Folder/Utilities/Disc Utilities and Repair Permissions.
The true test is to find a Mac OSX 10.2.2 user working with Premiere Elements 9.0/9.0.1 and Instant Movie to confirm your results
since there is always the possibility that there is something in the Instant Movie feature that is not compatible with your computer
operating system.
I am not sure what versions of Premiere Elements are "supposed to" work completely with Mac OSX 10.2.2.
We will be watching for your progress.
Thanks again for the follow ups. Appreciated.
ATR

Instant Hotspot: not possible to share iPad's LTE anymore?

I used to have my iPad's LTE plan in order to share it in my car with my family or in any other situations. That was one of the main reasons to purchase wi-fi / cellular version. With the new Instant Hotspot in iOS 8 only the iPhone has the modem mode and possibility to create the hotspot for other devices. Is that correct?

I was having the same issue with iPad 4, cellular + wifi model. Unlike iOS 7,Personal hotspot was not listed in Cellular Data for first time enabling.
Following steps resolved my issue in iOS 8;
Setting >Cellular Data >APN Settings > there is a section 'Personal Hotspot', with fields 'APN, username, and Password'
in APN field type www
then enable Airplane mode for few seconds and disable it. You should now see 'Personal Hotspot' appearing under Cellular Data and as a main listing in Settings.
Trust this help!

Inspection lot, goods movements not possible!

Hello dear SAP Gurus and friends,
I am trying to do a stock transfer from Quality to Unrestricted in QA32, but SAP shows error "Please fill delivery note!".
I have checked the Purchase Order and Delivery Note is filled!
Can you please help?
Thanks in advance,
Adelmo Silva

Hello,
I can explain the process better:
I receive the material from a Purchase Order into my warehouse, mov. type 101. Then the material as quality inspection on goods receipt activated, inspection lot is created and material stays in quality status on stok.
After that, is time to do the results recording and usage decision. When usage decision is done with OK, I have to move the stock from status Quality to Unrestricted, correct? Here, SAP shows an error that I have to fill the Delivery Note!
I checked the PO and the Material Movement that is in the Inspection Lot, and Delivery Note is filled! I have made debug on system and bypass the message. Material is now in Unrestricted. I just wanted to know what was the cause of this?
Thanks and best regards,
Adelmo

X220 - Enable Instant resume not possible?

Already updated the power manager to the latest power manager and i'm unable to keep the InstantResume enable. I check the box, click on OK, and when going back to the "Close the lid" window, I see that InstantResume has been disabled again. Running default settings for PowerManger, I have not changed anything.

hey ziggie216,
could you try updating the bios and chipset of your X220 and try the Instant Resume again ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Break up instant movie not possible

Similar Messages

Maybe you are looking for