Breakdown of MacBook?

I have a complicated question! To cut a long story short:
I bought my MacBook in july 2006 in The Netherlands. Now I live in the south of Chile where there isn´t any Apple computer (all Windows). I studying now (programming) and I want to make a living with this, but this will be in a few weeks. Now I don´t have much money! Therefore is there a big chance my MacBook will break down and please some suggestions to avoid this as much as possible?

If there is any weak point for a potential problem, it's your hard drive, which is going on 5 years old. Laptop drives can start to fail around that age. Of course some fail earlier and many go longer. I use SmartReporter which puts a small icon on the menu bar that visually shows me the condition of the SMART sensors in the hard drive (current version requires 10.5, perhaps you can find a downlevel version to work with 10.4). If it goes from green to red, it's time to replace the hard drive. Also, ensure you back your data up regularly, so if the drive crashes, instead of failing gently, you'll have minimal disruption.

Similar Messages

  • I can not make visualizer plug-ins work in iTunes

    I did a search and I did not see anything helpful.
    I am using an up-to-date version of iTunes with no other plug-ins installed.
    I have followed the instructions on this plug-in:
    http://www.dr-lex.34sp.com/software/spectrograph.html (updated 12-06)
    I know of other people that have had no problems getting it to work. I have reopened and closed iTunes, rebooted my machine several times, nothing.
    If anyone else can point out a spectograph plug-in that might work, help is appreciated.

    As an update, the plug-in installed perfectly fine, and it works on my MacBook Pro. So I tried moving the .bundle package from my MacBook Pro to my Mac Pro.
    Upon moving it to my Mac Pro, the icon changed from the normal iTunes .bundle icon to a normal folder. It also behaved like a normal folder. Double-clicking opened up the contents. And the plug-in still didn't work.
    So the breakdown here:
    MacBook Pro - Plug-in works fine.
    Mac Pro - When the .bundle was moved from MBP to MP, it turned right into a folder, not a bundle, and all attempts to turn it into a bundle failed.
    Any idea what is going on here?

  • I cannot project PDFs from my macbook Air.  I have the proper cords and adapters but the display option does not provide "mirror" as an option.  Hugely frustrating as this is client-facing breakdowns over and over.  Help please?

    When I connect my macbook air to projectors (most projectors) using the proper adapters, it simply does not recognize the displays.  My colleague and I have both had this problem repeatedly, indicating that it is a systematic issue. 
    Online blogs say we should be getting an option to "mirror display" in the display menu, but that is not an option.  Please help, I present several times a week and this is terribly unprofessional.
    Thanks,
    KBP

    Hello there, Kelly.
    The following Knowledge Base article provides some great troubleshooting steps for the issue you're describing:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Particularly, but not exclusively this information might be useful:
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    There are also some Helpful Related Articles and instructions near the bottom of the page as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My brand new Macbook PRO crashed completely after it went through the iOS 10.7.4 update, I lost everything and Apple just wants to replace the HD and let me deal with the hassle.

    Last Thursday May 10th I received a prompt from the Automatic Update to update the iOS to Ver. 10.7.4, set the start and was watching the progress when it stopped with an error message saying that it was not able to update, right below there was a buttom "RESTART", pressed the buttom and waited to re-boot.....That was the end of my computer, somehow the update crashed my HD beyond recover, it would only show the gray screen with Apple logo in the center and kept beeping, BEEP BEEP BEEP.....PAUSE.....BEEP BEEP BEEP.....PAUSE.....on and on and on and it never past that.
    Friday May 11 I took it to a retailer where I received the bad news that the HD was crashed and the teck couldn't even try to copy anything from it as it couldn't locate it. I checked iCloud on a hope that all my stuff would be there but new surprise, iCloud didn't kept all of my stuff as it was programmed to.
    Now here is the funny part, the tech from the retailer informed me that the only thing they could do was to order a new HD for my 4 months old Macbook and that the time to have my computer back will be at least 15 days, now that is the funny part, I fail to understand why do I have to suffer the hassle of loosing all my data plus wait at least 15th days to have my computer back (meanwhile loose work) on a problem caused by Apple, PROBLEM, not machine defect, clearly my computer had no problem untill I followed the procedure to update.
    On Saturday May 12 I contacted Local Apple Support (I have failed to mention that I live in Brasil) and they informed me that what the dealer said was the only thing that could be done, too bad for me if I lost everything, going to loose several days of work and whenever I receive my computer back will have to re-construct all my life and deal with the forever lost data.....DEAL WITH IT
    After a couple of discussion with Apple Support and the Dealer, I made my decision to take the Macbook to the dealer today for repair and meanwhile I'm opening a case with the Brazilian Justice to have Apple honor with all the trouble and hassle that it is causing me, it's said that I have to take this type of action as I'm a very fan of Apple and it's products, have had several iPods, iPhones, Macbooks, Keyboards, Mouses, Apple TV, etc.....This i the first time I have a problem with a Apple product and got a taste of the "Apple Care", it seems like Apple is more concerned on seeling products then keeping long time customers happy.
    One last thing, today when I was at the dealer to drop my computer for repair, the Technician informed me that he also had a computer crashed and the HD erase on Sunday May 13th in the same way of mine, after the update everything was gone, also he said that we were not the only ones, iPads and iPhones were going trough the same situation, update causing complete breakdown.
    WORD OF ADVISE, BE 1000% SURE THAT YOU HAVE EVRYTHING BACKED UP BEFORE YOU GO THROUGH AN UPDATE.

    rvalezin wrote:
    If I need to back-up every hour of my life in order to be able to save everything from something like this I won´t do anything else.....at least we should be able to trust that Apple tests this updates so situations like this won´t happen.
    That's exactly what Time Machine does for you.  It backs up every hour, so you don't have to.  While it is backing up, you keep on working.  Time Macvhine came with your Mac and you chose not to use it.
    The 10.7.4 update did not cause your hard disk to fail.  Hard disk fail due to mechanical causes.  They are extremely reliable, but that doesn't mean every hard disk will last a long time.  Your mileage WILL vary!
    If you are dependent on your computer and the data stored on it, then you should make sure you have AT LEAST two copies of all data and probably three or four.  You should use at least two means of backing up in case the backup software has a problem.  And you should consider having a backup computer if you live in an area where replacement takes too long (whatever too long is for your business).
    Apple hardware and software is very, very good.  You have documented your experience of this.  But NO hardware or software is perfect.  You also have experience of this.
    It is YOUR responsibility to ensure that your system is set up to protect your data and availability of computing resources.

  • How do I find the breakdown of GB's used in my "My Documents" folder?

    My MacBook Pro has been running very slowly - I see the beach ball all the time. After looking through the topics I realized that it's because I have:
    CAPACITY - 148.73GB
    AVAILABILITY - 22.03GB
    USED - 126.7GB
    My my documents folder is currently using 103.98GB of that space and I think it's time to clear it out. My question is: am I able to see a breakdown of how that 103.98 is being used? AND am I able to find out what the other 22GB's is being used for?

    Of course the first thing to do is just view the Documents folder sorted by size in list view.
    If you want even more detail, you can download a helpful program called WhatSize.
    FYI, though, if you have 22GB free space, that's almost certainly not why you're seeing the beach ball. There may instead be a rogue program or process that's running constantly and slowing down your machine.

  • MacBook Pro Retina, good enough for a few of After Effects? Or should I go for Windows Laptop?

    Hello!
    I'm now a college student ! And I'll need to get a new laptop We will be using it for CAD, MathLab etc.,
    But I practice on AE, I'm no expert at all (i don't even know some of the controls and keyboard shortcuts), I do like 'opening titles', a bit of 'harry potter effects', etc. I'm really interested in the new Retina Display MacBook Pro (base model), it will be the first time I ever get a Mac if I go for it
    But of course, the price is really high, so I have my doubts - the specs of the rMBP is not that superb - i think only the resolution is.
    My question is, will the base model rMBP give a decent After Effects CS6 performance, or a significantly worse performance than Windows Laptops at it's price?
    Thank your for your time
    Please ask me anything so I can help you better to help me

    I have a decked out MacBook Pro Retina and it works very well for all CS6 apps. It's actually faster by a bunch than I thought a laptop could be. I have several personal reasons for going Mac. They are my personal preferences and experience for reliability, stability, and customer service. I'm not married to OSX. If a better system for me was available I'd be using it. The for me is the critical part of that statement.
    The biggest advantage of Mac computers is that there is very little chance that the components have not been fully tested and integrated. The QA/QC in all Mac hardware is some of the best in the world. Every Mac I've ever owned has been virtually trouble free mechanically and outlasted every windows machine I've ever owned. Apple does make mistakes and fouls things up, but the chance that you are going to end up with a machine that just works and runs and runs is much higher than anything built from the variety of components available on Windows machines.
    Now my comments on windows machines. There are more manufacturers that I can count. There are more hardware combinations that I can imagine. Some manufactures produce excellent products. Some are just junk. Some last a very long time. Some breakdown all the time. If you were to go Windows make sure you check out the reputation and the warranty of the company building your machine. I've only owned one really high end Windows machine from a high end manufacturer. It ran just fine for about a year and a half before it needed some major component replacements. The warranty was out, there was no extended warranty available from that manufacturer, so the repairs cost me about 1/3 of the purchase price. If I'd gone with a company with a better service policy I would have saved a boatload of cash in the long run. Every other windows box that I've owned has been built from scratch or purchased in a shoe string. It took a fair amount of monthly maintenance to keep them running well.
    You mentioned CAD... Audocad on the Mac side is really crippled. My associate has the full Autocad Civil Engineering package running on his MacBook Pro Retina under Parallels. It's working fine. It's one of the largest and most complex CAD packages available. It actually works better on the Mac than it does on his HP laptop and the Mac batteries last a lot longer. The HP laptop cost about half what the MBPro did. It's about 6 months older. It's not as loaded. If you were to replace the HD in the HP laptop with the same capacity SSD that is in the MBPro and bump the memory up to 16GB the HP would still be less expensive than the MBPro by about 18%. The HP is plastic and aluminum with a display screen that's very sensitive to scratches and damage by pressure. The HP is not compatible with CS6's ray traced rendering or Mercury playback for PPro. There is an HP model that is though.
    You be the judge. Balance your budget and the software requirements with the expectations of reliability, service, customer service, and resale value and make your choice.

  • Not able to run installer when booting (Snow)Leopard on MacBook Pro Unibody

    Hi all.
    I would very much appreciate any help with this issue...
    I have recently installed an app called monolingual(stay away from it - don't touch it with a stick) - I thought I'd get a couple of GBs off my HDD by deleting the surplus languages... Unfortunately this resulted in other apps behaving strangely and rendered them unusable. I thought this would subside, if I'd reboot the machine. Unfortunately what I found, when i did so, was a blank default MacOs wallpaper(the one with the universe) and nothing else - not even a login prompt... Long story short - I have tried many things in single user mode - booting in verbose mode, to see what's up(nothing out of the ordinary) - booting in safe mode(didn't change a thing), and of course trying to restore my HDD from Time Machine - God bless time machine... Unfortunately in order to do that - I need the MacOs installer(which can't be reached) - I have tried to boot from DVD, while holding the C key, the option key - then choosing the DVD as the bootable device of choice, I've tried to install it remotely from my brother's macbook via ethernet - nothing worked. Also I have attempted the PRAM NVRAM reset as well as the SMC... I have tried all these things with both OsX Leopard and Snow Leopard... Nothing at all worked. To make matters worse, I am worried about my hard disk, as the only way I can shut my machine down is by holding down the power button, until it turns off(keyboard shortcuts don't work, and there are no menus or anything available) - that can't be good for HDD. As far as booting from my superdrive goes - the DVD seems to be booting{I can hear it working and see the progress (the dots and the drivers loading) in verbose mode}, however at some point it just reboots the laptop with no warning or message, and the whole ordeal repeats. I am desperate and running our of options... could someone please, please, please help? Any clue or tip would be greatly appreciated and will most likely spare me a nervous breakdown.
    Am I completely screwed, or just a little? Can this be fixed? For the record, I have no Apple Care, and my 1-year warranty had expired in November. Any suggestions?
    Thanks up-front to any kind soul with an answer or just kind words.
    Sincerely,
    Piotr.

    Re-partitioning a drive without losing data is a very difficult task. The data on the TM drive are, at this point, irreplaceable.
    It has been safe and a very common practice on a Mac to be able to add, remove and resize partitions for years. Apple supports it well with Disk Utility, and even for Bootcamp.
    Time Machine is just a file/folder on a partition, even if it's only on one partition. The Time Machine drive itself is not special in any way other than it has been set up to work on a Mac with the proper partition scheme and format.
    I was just suggesting a way to use the OP's mentioned hardware to perform some sort of test that would prove something, in order to know which step to recommend next. If Disk Utility says it can not create a new partition at the end of a drive, then there are fragments of data in the area and Disk Utility will refuse to resize the first partition to be slightly smaller. The OP can also go buy another drive for the experiment, and also use his brother's drive like *R C-R* mentioned. He can even buy a large USB thumb drive but I don't think he needs to buy anything for a 'test'.
    It is also very common for users to create new separate partitions on an existing TM drive for other machines to use. In fact, this is the preferred storage method when sharing TM with different machines because a partition can be easily removed without disturbing adjacent TM backups, it provides for a way to control the size of each machine's TM backup, and because it's much faster to replace a partition instead of trying to delete a TM backup with Finder. These are accepted practices we've learned the hard way.
    Going the other way, I routinely set up external 1TB drives for two partitions. The first 750GB partition is for TM, and the second is for a SuperDuper bootable clone. As requirements or user preference for TM or SuperDuper may increase due to larger boot drives or for whatever reason, the second partition can easily be deleted, and the first partition can be safely enlarged, with no data loss.
    Now in the case of a drive that is over 85% full or was ever that full, there is a high probability that the second partition can not be created due to files getting copied to the end of the drive. Disk Utility will refuse to change a drive like this.

  • What are the materials used to make a macbook pro?

    What are the material used to make a macbook pro?

    http://www.apple.com/environment/reports/
    In these reports are breakdowns like this:
    as well as other information regarding, for instance, restircted substances.

  • MacBook Air loses connection to internet but not LAN

    Hi, I am using a MacBook Air 11" (mid-2012) running OS X Mavericks (10.9.3). I'm connecting to my home LAN via WiFi connection to a TP-Link 300M Wireless router that is setup as a switch (per instructions here http://www.tp-link.com/en/article/?faqid=417), which in turn is connected via wire (ethernet-over-power) to a Technicolor cable modem/router provided by my ISP (UPC in the Netherlands; I can look up the model number of the router if needed, but it's two floors down right now and doesn't strike me that this is the cause of the problem).
    I have a problem that my MacBook Air intermittently loses connectivity to the internet for extended periods (minutes) even though (a) the MacBook Air maintains full connectivity to my LAN at the same time through WiFi and (b) other computers connected to the cable modem/router maintain their connection to the internet while my MacBook Air has lost its connection.
    My test to see where the breakdown is occurring is to have four terminal windows up and running ping processes:
    1) ping to 192.168.0.1 (my router) - this always stays live, with essentially no lost packets
    2) ping to an external address (I'm using 74.125.136.94, a google.nl address) - this is my main test for access to the internet and where I see ping failures (I'm also testing with pings to other sites when the problem is occurring to ensure it's not something on the remote end).
    3) ping to 192.168.0.13, which is a Synology NAS attached via ethernet cable to my main cable modem/router - this always stays live, with essentially no lost packets.
    4) a login to the Synology NAS, where I am also running a continual ping to 74.125.136.94, and this external ping does NOT fail when the one from my MacBook Air does, it stays live with essentially no lost packets.
    The problem will usually correct itself after 1-3 minutes (though the time is not consistent), and also gets corrected if I turn the MacBook Air's WiFi off and on again.
    Any suggestions for what I can do to stop this problem?
    Thanks
    John

    > 1. If the MBA is connected to the
    >     a. the Technicolor SSIDs, is the behavior the same (poziom-k testing shows that a second AP causes problems).
    No. If connected to WiFI served by Technicolor, the problem does not occur (even if the other AP is connected to the network).
    >     b. can the Technicolor be replaced easily by an Airport Express/Extreme, to repeat this test?
    Unfortunately, Technicolor in router mode is required by my ISP.
    > 2. Instead of WiFi, if the MBA is cabled to the secondary AP, is the behavior the same?
    Yes.
    > 3. Has Wireless RF interference been ruled out for dropped connections?
    Yes. A Windows machine and several iOS mobile devices work flawlesly for me.
    > 4. If the MBA has a wired connection to the Technicolor, does the problem still exist?
    No. The problem occurs only if connected through additional AP.
    > 5. Have packets been captured at each interesting point in the topology to see where are packets drops occurring? netstat -s is probably worth looking at > such points. Wireshark (or similar tools) can help.
    Not yet. I will not have a chance to do it for the next few days though :/

  • My Macbook Pro is stuttering like George VI in The King's Speech

    Hello fellow dwellers,
    My Macbook Pro (OS X 10.6.8) is experiencing some difficulties, like freezing up after being asked to do the most mundane tasks. The poor thing stutters when going through e-mails and has a complete mental breakdown when trying to open a downloaded video of a bunch of adorable kitties. I sent it to get some therapy (last software update 19-9-2013) but it didn't help. Anyway, before this story gets away from me completely, I'll list what happened after that
    At startup, I get a weird white screen (where if you look closely you can see horizontal lines run through it) with the apple logo. It makes the customary gong noise and then progresses to a throroughly white screen. No mouse,no keyboard activity. Sometimes it snaps out of it and I get a blue screen, followed by some kind of pixelated, abstract illustration that is reminscent of MS Paint (oh, the good ol' days). Sometimes the blue screen leads me straight to my desktop. Those are good days. 
    When it doesn't snap out of the white screen, it just stays that way until I get fed up with it and shut it down. Sometimes, pressing and holding CMD+alt+P+R and letting it restart two times helps getting me to my desktop (not in the regular way, but I've found out that seeing the bright blue screen means there's a good chance at getting through). Sometimes it does't make a difference at all. Same goes for the safe boot (Shift + CMD + V). I tried CMD+S at startup and then typed fsck -fy (for fsck's sake). At the end I get two messages: “The volume [name] appears to be OK” and “FILE SYSTEM WAS MODIFIED.” After booting I still have the same problems.
    I ran disk utility to scan the HD. Nothing appears to be wrong with it. Just incase, I copied the entire contents to an external HD using SuperDuper. I deleted all the stuff I didn't need (I now have 400GB out of 500GB free on the HD).
    Sometimes, when I reach m desktop it almosts seems like everything is back to normal. Then I try to run a simple application and the whole thing crashes again.Things like reading a simple pdf file..The most recent development? Finder crashing all the time. I'll force it to stop (or restart, because you can't actually stop finder) and it'll freeze two seconds after opening. Rinse, repeat. Internet also crashes regularly. Chrome is a whiny ******* compared to Firefox when it comes to that, but they both eventually crash.
    Anyway, I have no clue what to do now, short of throwing money at a geeky looking Apple employee.  Thanks for reading through this undoubtly boring post. I tried to be a bit entertaining, but one can only use so many euphemisms and metaphors before it gets old.

    Thanks! Here's the latest Kernel panic log:
    Tue Sep 24 13:06:11 2013
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff8000225778, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff8060106000, CR3: 0x00000000074a7000, CR4: 0x0000000000040660
    RAX: 0xffffff8060106000, RBX: 0x0000000100400000, RCX: 0x000000000000c6b3, RDX: 0xfffeffffffffffff
    RSP: 0xffffff80601938d0, RBP: 0xffffff80601938d0, RSI: 0x0000000100400000, RDI: 0xffffff800b771280
    R8:  0xffffff80008436e0, R9:  0x0000000000000001, R10: 0x0000000000000000, R11: 0x0000000000000000
    R12: 0xffffff80084c6660, R13: 0x0000000100400000, R14: 0xffffff80084c6660, R15: 0xffffff800b771280
    RFL: 0x0000000000010286, RIP: 0xffffff8000225778, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8060193570 : 0xffffff8000204d15
    0xffffff8060193670 : 0xffffff80002d1208
    0xffffff80601937c0 : 0xffffff80002e3f4a
    0xffffff80601937d0 : 0xffffff8000225778
    0xffffff80601938d0 : 0xffffff80002257dc
    0xffffff80601938f0 : 0xffffff80002268be
    0xffffff8060193970 : 0xffffff8000226109
    0xffffff8060193990 : 0xffffff800021039d
    0xffffff80601939d0 : 0xffffff8000210b70
    0xffffff8060193c10 : 0xffffff8000210ffe
    0xffffff8060193c80 : 0xffffff8000250cf4
    0xffffff8060193ca0 : 0xffffff80002381d0
    0xffffff8060193cf0 : 0xffffff80002383e8
    0xffffff8060193d30 : 0xffffff80002fd78c
    0xffffff8060193db0 : 0xffffff80003075d5
    0xffffff8060193e00 : 0xffffff80002fa64d
    0xffffff8060193e20 : 0xffffff8000485e0c
    0xffffff8060193ec0 : 0xffffff800048f6d8
    0xffffff8060193f40 : 0xffffff80004e8168
    0xffffff8060193fa0 : 0xffffff80002e4874
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 2316513977110
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI    4.2.0 (addr 0xffffff7f8131a000, size 0x65536) - last unloaded 135213470126
    loaded kexts:
    com.apple.filesystems.exfat    1.0.2 - last loaded 200648490193
    com.apple.driver.AGPM    100.12.31
    com.apple.filesystems.autofs    2.1.0
    com.apple.driver.AppleHWSensor    1.9.3d0
    com.apple.driver.AppleMikeyHIDDriver    1.2.0
    com.apple.driver.AppleHDA    2.0.5f14
    com.apple.driver.AppleMikeyDriver    2.0.5f14
    com.apple.driver.AudioAUUC    1.57
    com.apple.kext.ATIFramebuffer    6.3.6
    com.apple.driver.AppleUpstreamUserClient    3.5.7
    com.apple.driver.AppleMCCSControl    1.0.20
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.1.6
    com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
    com.apple.driver.AppleLPC    1.5.1
    com.apple.driver.AppleGraphicsControl    2.10.6
    com.apple.kext.AppleSMCLMU    1.5.2d10
    com.apple.ATIRadeonX3000    6.3.6
    com.apple.driver.AppleIntelHDGraphics    6.3.6
    com.apple.driver.AppleIntelSNBGraphicsFB    6.3.6
    com.apple.driver.SMCMotionSensor    3.0.1d2
    com.apple.driver.AppleUSBTCButtons    201.6
    com.apple.driver.AppleUSBTCKeyboard    201.6
    com.apple.driver.AppleIRController    303.8
    com.apple.iokit.SCSITaskUserClient    2.6.8
    com.apple.BootCache    31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage    1.6.4
    com.apple.driver.AppleUSBHub    4.2.4
    com.apple.driver.AppleFWOHCI    4.7.3
    com.apple.driver.AirPort.Brcm4331    433.11.5
    com.apple.driver.AppleSDXC    1.0.3
    com.apple.iokit.AppleBCM5701Ethernet    3.0.5b8
    com.apple.driver.AppleEFINVRAM    1.4.0
    com.apple.driver.AppleSmartBatteryManager    160.0.0
    com.apple.driver.AppleAHCIPort    2.1.7
    com.apple.driver.AppleUSBEHCI    4.2.4
    com.apple.driver.AppleACPIButtons    1.3.6
    com.apple.driver.AppleRTC    1.3.1
    com.apple.driver.AppleHPET    1.5
    com.apple.driver.AppleSMBIOS    1.7
    com.apple.driver.AppleACPIEC    1.3.6
    com.apple.driver.AppleAPIC    1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
    com.apple.security.sandbox    1
    com.apple.security.quarantine    0
    com.apple.nke.applicationfirewall    2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
    com.apple.driver.AppleProfileReadCounterAction    17
    com.apple.driver.DspFuncLib    2.0.5f14
    com.apple.driver.AppleProfileTimestampAction    10
    com.apple.driver.AppleProfileThreadInfoAction    14
    com.apple.driver.AppleProfileRegisterStateAction    10
    com.apple.driver.AppleProfileKEventAction    10
    com.apple.driver.AppleProfileCallstackAction    20
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IOFireWireIP    2.0.3
    com.apple.iokit.IOSurface    74.2
    com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
    com.apple.iokit.IOSerialFamily    10.0.3
    com.apple.driver.AppleHDAController    2.0.5f14
    com.apple.iokit.IOHDAFamily    2.0.5f14
    com.apple.iokit.IOAudioFamily    1.8.3fc2
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.iokit.AppleProfileFamily    41
    com.apple.driver.IOPlatformPluginFamily    4.7.0a1
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.driver.AppleBacklightExpert    1.0.1
    com.apple.kext.ATI6000Controller    6.3.6
    com.apple.kext.ATISupport    6.3.6
    com.apple.iokit.IONDRVSupport    2.2.1
    com.apple.iokit.IOGraphicsFamily    2.2.1
    com.apple.driver.AppleSMC    3.1.0d5
    com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.8
    com.apple.driver.AppleThunderboltDPOutAdapter    1.3.2
    com.apple.driver.AppleThunderboltDPInAdapter    1.3.2
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.3.2
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.1.6
    com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
    com.apple.iokit.IOBluetoothFamily    2.4.5f3
    com.apple.iokit.IOUSBMassStorageClass    2.6.7
    com.apple.driver.AppleUSBMultitouch    207.7
    com.apple.iokit.IOUSBHIDDriver    4.2.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    2.6.8
    com.apple.iokit.IOBDStorageFamily    1.6
    com.apple.iokit.IODVDStorageFamily    1.6
    com.apple.iokit.IOCDStorageFamily    1.6.1
    com.apple.driver.AppleUSBMergeNub    4.2.4
    com.apple.driver.AppleUSBComposite    3.9.0
    com.apple.driver.XsanFilter    402.1
    com.apple.iokit.IOAHCISerialATAPI    1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
    com.apple.driver.AppleThunderboltNHI    1.2.6
    com.apple.iokit.IOThunderboltFamily    1.4.9
    com.apple.iokit.IOUSBUserClient    4.2.4
    com.apple.iokit.IOFireWireFamily    4.2.6
    com.apple.iokit.IO80211Family    320.1
    com.apple.iokit.IONetworkingFamily    1.10
    com.apple.iokit.IOAHCIFamily    2.0.6
    com.apple.iokit.IOUSBFamily    4.2.4
    com.apple.driver.AppleEFIRuntime    1.4.0
    com.apple.iokit.IOHIDFamily    1.6.6
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    6
    com.apple.driver.DiskImages    289
    com.apple.iokit.IOStorageFamily    1.6.3
    com.apple.driver.AppleACPIPlatform    1.3.6
    com.apple.iokit.IOPCIFamily    2.6.5
    com.apple.iokit.IOACPIFamily    1.3.0

  • How can I tun my Macbook Pro into a wi-fi router? I have no airport/ethernet devices; I've airport utility though.

    I'm currently running Mac OS X 10.7.5 and I have no ethernet cable or airport devices. I have airport utility though. Is it possible to turn my Macbook into a wi-fi router under the current settings available?

    I think I've figured out a way to do so without any ethernet cable and it's working pretty well for me since then. Although every time I initiate wi-fi sharing from my Mac, it says doing so could actually disrupt my connection (see screen shots); but I'm yet to experiance any kind of breakdown/disruption of my internet connection.
    Anyway thanks for your answer and suggestions.

  • Macbook DVD burn problem

    I've a Macbook Pro running Snow Leopard. I just now tried to burn a DVD following the instructions in Mac Help, and it whirred away fine for a few minutes then I got the following error message:
    After this message the drive whined and whirred for a couple of minutes more, then self-ejected. The disk had been written to, but turned out to be unreadable so was thrown into the bin. The DVD+RW was straight out of a sealed packet and other discs from that packet worked fine on PCs.
    Can anyone advise as to what might be the cause of this error? I don't want to keep wasting discs, if only for environmental reasons. The Macbook itself is some 3 years old but I don't use the CD drive much and when I have done, for reading, it's functioned fine. Is this more likely to be a hardware or an OS error?
    This is not the first time, if it is the OS at fault, that I've had trouble burning discs from Mac software, but I can't go into details as otherwise my post will again be deleted for not being "constructive". I'm getting to the stage where to back up my Macbook I'll have to copy to a USB stick (which is pretty slow given USB data rates) then burn a disc on a Windoze PC.
    TIA from the hamster

    Sorry, I've just noticed that you wrote:
    "I can't see your error message.  I don't know if apple removed it or what, so I can't really comment on the error."
    I included a shot of the error message in the original post as a bitmap, which is still there as far as I can see. In text form, the error message read:
    "The disc can't be burned because because [sic] communication between the computer and the disc drive failed (error 0x80020022)"
    Which is better than many error messages, but doesn't indicate what might cause the communications breakdown. Plainly the data flow to the drive was interrupted or slowed too much for the drive. I'll look at the disc diagnostics as you suggest.
    Googling the error message came up with quite a few results, and it looks like this is a common problem but with no clear solution:
    Superdrive error
    Apple support
    Apple support (2)
    And yes, I suppose I should have Googled before posting, but I'd still not have found an answer. I'll try a DVD R rather than an RW and see if that makes a difference - I know that RW disks can be iffy for some hardware and OSs.

  • Storage Breakdown On iTunes and iPhone Do Not Match Up

    I will preface this question by providing the following information:
    Computer Information
    Model: MacBook Pro, mid 2009, 15 inch
    Capacity: 1 TB
    OS: Yosemite (10.10.1)
    iTunes Version: 12.0.1.26
    iPhone Information
    Model: iPhone 6 Plus, purchased early 1/2015
    Capacity: 128 GB
    OS: iOS 8.1.2
    Okay here's the problem. I was attempting to sync my iPhone 6 Plus with my iTunes library. I have about 50 GB of music which I normally carry around on my iPhone, which amounts to about half of my total storage. On my latest sync, I was told in iTunes that I do not have enough space to complete the sync. Here's what the display looked like:
    As you can see:
    > The total capacity for audio is displayed as being 49.67 GB (aprox. 6889 songs).
    > The total capacity for photos is displayed as being 6.89 GB (aprox. 10,647 photos).
    > The total capacity for apps is displayed as being 5.04 GB (aprox. 110 apps).
    > The total capacity for other is displayed as being a whopping 45.08 GB.
    Upon seeing this, I'm shocked that the other category is taking up so much space. I immediately go to my iPhone to begin trying to eliminate things that could possibly be taking up all this space. When I take a look at my iPhone usage, I see this:
    As you can see, the photos and apps are approximately correct, but the songs are way off. In addition, the free space I have on my iPhone according to iTunes is 6.12 GB. According to my iPhone though, I have 47.1 GB (see the screenshot of my iPhone above).
    Essentially the storage breakdown on my iPhone and iTunes does not match up. I'm not sure how to fix this problem without restoring the phone, which I want to avoid doing if I don't have to.
    Has anyone else had this problem? If so, is anyone aware of a possible solution?
    Thanks.

    If it was an iOS bug I would expect to see it on the 3 devices I have upgraded to iOS 8. I don't see it on any. I would also expect there to be thousands of posts and views about it, as somewhere over 100 million users have updated. This is the only thread I have seen, and you are the only one posting about it.
    Go to Settings/iCloud. Turn off Find my iPhone. Then go to Settings/general/reset - Erase all content and settings. Check your "Other". I would expect it to be minimal.

  • Were can I buy parts to fix my own computer (2006 MacBook Pro)

    My MacBook Pro is out of warrantee.  I know how to replace the fan that has gone bad,  but I am looking for the best resource for purchasing parts.

    ifixit.com has breakdowns and walkthroughs for all kinds of repairs, and links you to sellers for the various parts and components.

  • Help with choosing a MacBook Air Model for a college student.

    I am a college student and I am debating between the two 13 inch Mac AirBook models that Apple offers. I was wondering if someone can give me a breakdown of the differences and also, which model would be a better fit for a college student?

    The two models are described here:
    MacBook Air (13-inch, Mid 2013) - Technical SpecificationsJun 10, 2013
    Actually, there is only one model.  You can purchase it with 128GB or 256GB of storage.  But you can customize other features as well, such as the processor speed and the RAM size.
    Asking which model is best for a college student is just like asking what type of car you should buy.  It's up to you.  In my opinion, if you're going to spend a bit of money to upgrade from the base model, the first place to upgrade would be the RAM size.

Maybe you are looking for

  • CRM Pricing error after 5000 seconds with CRM_ORDER_MAINTAIN in background

    Hi, This is Rajender. I am using function module CRM_ORDER_MAINTAIN to create sales order. I am facing a error while creating sales order from text file. while uploading 15000 records it is taking more than 5000 seconds. But after 5000 seconds the ba

  • How to get error message on the same jsp

    Hi guys, I have a login.jsp page and I want an error message to be printed "login failed" in the same jsp page when the user enters the wrong credentials. Any ideas on how to do that is highly appreciated. Thanx in advance.sri

  • Still not update my lumia 620

    Hi gud even I done with ur prosess like using Lumia updater itz juz update extra n info... Not update my device...... Now what the next prosess which will do update my Lumia 620.... :'(:'(

  • Query based on date partition

    Hi, I am trying to output only a successful job during the past 24 hrs of each day. If there is job that has an outcome of a success and a failure within the last 24 hrs for each day, I want to only output the successful one. If there are no success

  • Urgent: User Roles assigned to Sales Orgs and document types

    Dear Guru's : I have job user roles one side and sales orgs on otherside. We are trying to find out which sales orgs are using what sales document types. All i am trying to achieve is connect those two and make a report. it needs to be done by SE16 F