Breakdown report / Analysis - MCI7

Hello,
Can someone explain to me how transaction MCI7 work and how to understand the results?
The thing is i do not get any data : in the order , besides, having "breakdown" field selected  and "malfunction start/end" filled , is there any other pre-requisites?
Thanks,
Pete

Hi,
The start up date in the equipment and fun location is the reference for all your break down analysis.
Once you maintain this and create maintenance orders and notifications then info is passes to the respective structures.
This all calculations are purely based on time. From the start up date system considers that the equipment has started performing considers that 24hrs ran if there is no breakdown order or notification is created against the same.
2 maintenance orders are required if you want to see the MTTR and MTBF.
Regards,
N.nagaraju

Similar Messages

  • Weekly breakdown report

    Hello every one,
    In my project my client is asking for weekly breakdown report. When i m running mci7 report that report is monthly. When i change cofiguration for Information structure as date wise. System is not calculating all the reports. Is there any other way to get the breakdown reports on weekly basis apart from PMIS.
    Regards
    Abhishek

    Hi,
    Only monthly update period is supported for this structure - see note [80311|https://service.sap.com/sap/support/notes/80311]:
    Check the Customizing settings with Transaction OMOS.
    The update period for the information structure S070 must be 'Month'.Changing the update period is not allowed.
    -Paul

  • I want a report for Report analysis....

    i want a report for Report analysis....
    the require ment is like below...
    Selection
    From Date
    To date
    Set Up Data
    Bank Accounts           From—To
    Billing Accounts         From—To
    %  Operations  % Management % Research & Development
    Above % applies on Billed Amount.
    Report Need to be displayed
    SBU/Dept     OB Bank     Receipts     Payments     Balance     Accrued OB on Billing     Accrued on  Billing     Balance
    SBU1                                   
    SBU2                                   
    SBU3                                   
    SBU4                                   
    SBU5                                   
    SBU6                                   
    SBU7                                   
    SBU8

    Hi Sam
    As I said, you can tag variance of FG upto some extent to the COGS of FG...
    Also note that, w/o ML, variance is disposed off in the month of mfg, where as COGS comes in the month of sale... For eg: You mfr 100 Kgs @ Actual cost of 120, where as your std cost is 100... You sell 50 kgs in Month 1 and 50 kg in month 2
    In Month 1
    COGS = 50 (@ std cost)
    Variance = 20
    In Month 2
    COGS = 50
    Variance = 0
    Variance analysis w/o ML is always limited.. At best what you can do is draw your COPA reports on YTD (Year To Date) basis... Assuming that your closing and opening stock is more or less the same, your variance related to FG can now be analysed with COGS and revenues....
    Also, if your prod order for FG is tagged to sale order on account of MTO scenario, your COPA doc for variance will have customer info as well
    With ML in place
    Variance of SFG can be rolled upto FG... i.e. Say, variance in SFG is 20 USD... Std cost of FG is 125 USD... When you roll up the variance to FG, your FG valuation will become 145 USD....
    Also, if part of the FG is sold off, then prorata variance will go to Inventory and the rest can be taken to COGS.. i.e. not only FG, you can also revaluate your COGS with ML...
    Regards
    Ajay M

  • SM20/SM20N audit report analysis - in background

    Hi,
    I would like to create an audit log / audit report analysis in background.
    I've found an article bu interested to understand if it is the only way to do that ?
    article: http://sap.ittoolbox.com/groups/technical-functional/sap-security/security-audit-reports-using-sm20-1019745?cv=expanded
    Any idea ?
    Dimitry Haritonov

    i have not tried it but yes thats what mentioned in the Note 838847
    Instructions for Releases 4.6C and 6.20
    Creating the RSAU_SELECT_EVENTS program:
    Title: "Selection of audit events from the audit files (background variant)"
    Type: Executable program
    Application: Basis
    Package: SECU
    Logical database:
    See the correction instructions for the source code.
    if your question is answered , mark it answered and award the points ..
    Regards
    dEE

  • Planning ,Business rules and Reporting Analysis Backup

    Hi
    Currently we have migrated our Hyperion Planning EPMA 11.1.1.2 applications from TEST to PROD on windows 2003 Server (2 boxes).Essbase Server on UNIX and Application Server is OAS.We need to take backups on daily basis for Hyperion planning, BR's ,Reporting Analysis , Financial Reporting and Essbase , Open LDAP.
    But now We are taking only backups for Essbase and Open LDAP by using maxl script and Backup.bat file (Scheduled in Windows Scheduler)
    As per the documentation we are going to take the backups for the Hyperion planning, BR's ,Reporting Analysis , Financial Reporting also.
    Our concerns are
    1)Is there any BAT files for planning , BR'S and Reporting like open LDAP Backup.BAT
    2) If doesn't have how can we move ?(not manually, Using Windows Scheduler)
    3) Is there any necessity to create new Batch scripts for this action?
    Could you please any one help me out.
    Thanks in advance

    Hi,
    There are no other batch scripts I am aware of, you will have to create any new ones.
    In regards to backing up with business rules and planning, that would be mainly be backing up the repository.
    You can also use LCM to export your objects and this can be called from command line.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • BW Reporting & Analysis Overview

    Hi folks,
    I need a high-level presentation on SAP BW Reporting & Analysis. Basically, I'm looking for a condensed presentation of TBW20 or BW305 course. Say 50 pager material with diagrams + summary text. Knowledge Warehouse content is too detailed for this purpose. Appreciate your help with this matter.

    Hi,
    did you have a look on the functions in details in the service market place?
    http://service.sap.com/~sapidb/011000358700007863572002
    Heike

  • Unable to Reconfigure Hyperion Reporting Analysis

    Hi All,
    We are trying to reconfigure Hyperion Reporting Analysis in System 9 version 9.3.1,We are using weblogic appserver .Installation in Sunsolaris 64bit v 10.
    I was selected all configure options of reporting analysis,
    After finishing few steps i am getting this Error "6801 port using by another process" .
    I have checked configtool.err file in that error msg is "ERROR, Core services is Busy,Value=6801.
    before configuring i have down all the services except shared services.
    Why I am getting this error
    Can anyone help to me
    BR
    RAM

    Hi,
    1. For reporting and analysis default service ports range from 6790 to 6810.
    2. Core service 's default port number is 6801
    3. Ensure that services of reporting and analysis are down , and re configure. It should work
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • "Reporting & Analysis" is grayed out

    I upgraded Shared Service and Workspace to 11.1.2.1.600 and Financial Reporting to 11.1.2.1.133. As per readme, when I try to reploy Financial Reporting Web Application using EPM Configuration Tool, "Reporting & Analysis" is grayed out.
    I edited raframework_1_config.xml in ORACLE_INSTANCE/config/foundation/11.1.2.0/product/raframework/11.1.2.0 .
    Changed the value from Configured to Pending
    <property name="shortcutFolderName">Oracle EPM System/Reporting and Analysis</property>
        <property name="state">Configured</property>
        <bean name="taskConfiguration">
          <property name="applicationServerDeployment">Configured</property>
          <property name="hubRegistration">Pending</property>
          <property name="HyperionFinancialReportingConfiguration">Configured</property>
          <property name="preConfiguration">Configured</property>
          <beanList name="preSelectedTasks">
            <listItem>
    Still its grayed out.

    Checked in 11.1.2.2 and it works fine there. Refresh is refreshing the image with data.
    Will check it in 11.1.2.3 (don't have access to it now)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Planning, Budgeting, Forecasting, Reporting & Analysis Add-on for SBO?

    Any proven solutions out there for planning, budgeting, forecasting, reporting & analysis for SAP Business One? Something that is applicable to a service-based industry. Something like http://centage.com/products-planningmaestro-product-overview.htm.  Thanks!

    Hi,
    There are no other batch scripts I am aware of, you will have to create any new ones.
    In regards to backing up with business rules and planning, that would be mainly be backing up the repository.
    You can also use LCM to export your objects and this can be called from command line.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Training manuals for HFM, Planning, and Reporting & Analysis

    Does anyone have or know where I can get copies of Hyperion 9.3 training manuals for HFM, Planning, Reporting & Analysis, and Financial Reporting? I want to review and practise them inorder to be able to train others.
    Mike

    they are really not worth it. You'd better serve your people by reading the user manuals (available on machines that have the programs installed in C:Hyperion or from Help) and practicing.

  • Can OEM Grid Control(12c) can provide the KPIs trend reports/analysis?

    Hi experts:
    Can EM cloud Control(12c) can provide the following trend reports/analysis for Report Servers(11gFMW report service)?
    average response times
    current job load
    job load
    failed job ratio
    current jobs
    etc.
    If EM cloud control (12c) have not the indicators , Can we progmram to realize the above indicators and save the indicators to EM cloud control database?
    If we can do programming to monitor the indicatiors, Is there any development documents to reference?
    Thanks
    Regards
    Edward

    Any update?
    Thanks

  • AV Scripts, Free form docs, Breakdown reports and more...

    Hi there,
    We've posted an update to Adobe Story that includes exciting features like AV Scripts, Free form documents, and Breakdown reports among other things.
    Check out the latest release notes to know more.
    - Adobe Story team

    This is a very very nice update, especially all the breakdown reports that I was missing badly.

  • Hyperion Financial Management vs. Hyperion Reporting & Analysis...

    Hi John,
    can anyone pls tell me what are the differences between Hyperion Financial Management and Hyperion Reporting & Analysis?? Which one should I use? Which component can really help me efficiently creating reports???
    A response will be appreciated.
    Thanks.
    Edited by: Sap B on Jun 1, 2009 4:16 AM

    Hi,
    HFM is a consolidation application :- http://www.oracle.com/appserver/business-intelligence/hyperion-financial-performance-management/hyperion-financial-management.html
    Reporting & Analysis is a set of tools for reporting such as Financial Reporting, Web Analysis and have connectors to essbase, planning and HFM
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Breakdown report

    Hi PM Guru's,
    Need a report that takes list of equipments / FLs as input for a maintenance plant and shows the breakdown trend for a period of say 15 years and corresponding repair cost incurred during that year.
    for example : i should see for a equipment the breakdowns for period between 1995-2010 and for every year the no of breakdown's and repair cost in that year spread for entire 15 years.
    Thanks

    I am unclear what you require is it a report for all maintenance carried out or just for breakdowns.
    Breakdown information is held on the notification where the financial information on cost of repairs and regular maintenance is on the order.
    For breakdown analysis go to the PM Information system MCI7 transaction
    For cost analysis go to the PM information system MCI8 transaction and search by Functional location or Equipment with month and year ranges. You have the option to switch the drill down to monthly once the report is displayed.
    hope this helps
    Jim

  • Goods receipt/Invoice receipt report Analysis

    Hi All,
    Like AP agfing report is there any aging report for  GR/IR?
    What are the other analysis report/tools  available ?
    Thanks in advance.
    regards,
    Chitra.

    F.19 GR IR Analysis.
    Please reward points if it solves ur requirements.
    regards,
    SGS

Maybe you are looking for

  • How to generate oracle report in PCL format

    Hi, We are having an issue in our application where the output report(PDF) is getting generated in the Postscript format. The first few lines of the output pdf are like this: %!PS-Adobe-3.0 %%Creator: Oracle Toolkit 2 for Motif 10.1.2.0.2 PRODUCTION

  • Help with a node tree

    hi guys here's the problem i'm having: I have a class called Node that I am building a tree out of. Node is a very simple structure, has three parts: element, left and right, with element being the top. Then I have a class called converterTree. This

  • TNS connection in Oracle SQL Developer

    We have been using TNS connections in SQL Developer. Today we moved a database to a new server but still used the same TNS alias in tnsname.ora file for the database. However, the tns connections in SQL Developer shows this alias still points to the

  • Sample program to Call XML RPC

    Hi Friends, Is there a sample abap program to call a XML RPC routine for eg <cloud domain="rpc.sys.com" port="80" path="/RPC2" registerProcedure="pingMe" protocol="soap"/> I have a RPC procedure pingMe,which resides in domain rpc.sys.com. regards kau

  • Email signature editing almost impossible on iOS5 iPhone4

    Anyone else having issues trying to edit signatures on an iPhone 4 in the mail settings? When I try, I can only see a one-line window at the top of the screen, that is almost too close to the top to do any editing. Any suggested resolutions to the is