Breaking Dawn – the newest of the Twilight series and In Time

I have really enjoyed all of the Twilight movies (I’m a sucker for a good love story) and was able to watch the newest of the series – Breaking Dawn (released on 2/11/12) last weekend, as well as the new Justin Timberlake film (released on 1/31/12) – In Time. Both were really good, Breaking Dawn features the wedding of Edward and Bella as well as a surprise that follows. In Time features a really neat concept of using time in place of money and the suspense was incredible; I ended up having to purchase the movie, from Best Buy, of course.
Does anybody else have any comments about these two new releases or has anybody seen any other good newly released movies they would like to recommend?
Sarah|Community Connector | Best Buy® Corporate

Aliens vs Cowboys, was better than I expected
Pirates 4, ok... the best was the first one
Puss in Boots, pretty decent
I'm really looking forward to the Immortals, then Project X and the new clash of the Titans movie.

Similar Messages

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still us

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still use Flash Player...
Is there anyo who can help me with this? I asked in the shop and I was told "yes of course" , but when I contacted Sony directly I was advised to check with Adobe as apparently in the recent months Adobe and Sony haven't been getting along anymore...

You may be mixing up two entirely different Adobe products.
1. Adobe Flash Player. Needed to view web pages designed with Flash. Not needed to view PDF files. Not available for Android (not just Sony).
2. Adobe Reader. Reads PDF files. However, the Android can also read most PDF files without needing Adobe Reader.

I have few questions to ask about the Expert Series and Valet Series

Hello.
I have few questions to ask about the Expert Series and Valet Series.
1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
2. Do I "HAVE TO USE CONNECT SOFTWARE"? Can I just use web interface to do every setting that these routers features?
3. Does expert series routers support guest network and parental control?
4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
Ok, that's all for now.
If I need to ask more questions I will do that in this thread as reply

With the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
These both the routers are backward compatible and they can connect to your G Series Product.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

Compass Health Systems wrote:
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

HT1430 i have started the guided access and that time my ipod touch 3 battery gets over now i cant close my ipod or cannot restore it

i have started the guided access and that time my ipod touch 3 battery gets over now i cant close my ipod or cannot restore it

Without knowing what happens when you try to restore the iPod
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How come sometimes the Ken Burns effect allows you to edit the entire picture, and other times it automatically starts at a smaller section of the photo?

How come, in imovie, when adding the Ken Burns effect to a still photo, sometimes the phoo appears as the full size, and other times, the green and red ken burns boxes appear only on a smaller portion of the picture? I want to be able to Ken Burns a bigger chunk of a picture, but often times it is as if there is a pre-set for just how much the Ken Burns will cover.

Is it possible that the ones that have small boxes are in Portrait while the ones with large boxes are in Landscape?
If so, you can get bigger boxes on the Portrait ones by clicking "Allow Black" in iMovie 11. (iMovie 09 did not have this feature.)

I recently purchased the inbetweeners series and it took my money and never downloaded..what do i do?

i bought the inbetweeners series 1 from itunes store and it never downloaded but took the money off my gift voucher..what do i do?

From the iTunes menu bar click Store / Check for Available Downloads

Multiple users working in the same document and same time.

Hello Guys,
and thanks for looking into this
At our company we're still in doubt wether or not to update our software to CC or just update to CS6. Currently we all have different versions (going from CS3 to CS5), and that's really time-consuming.
The most important question would be if it is possible in the CC to work in the same file at the same time.
Working on magazines, catalogues or books this would be a major time-saving option!
For example I could work on chapter 1 and 6, whilst my collegues are working on the other chapters.
The other users could then see how far I am on my chapters, change things (make notes) etc.
Is this possible in CC or not?
Thanks for your answers and time.
Best regards,
Sam
PS: If there are major setbacks working on the cloud (between multiple users/computers) please let us know.

Let me attempt an answer.
Short answer, no. Multiple users cannot edit a the same file at the same time.
You'll need a content management system, to enable check in/check out, prevent overwrites etc. But (there's always a but), Creative Cloud offers several workflows and tools that can be used to help streamline multi-user publication workflows.
Using Creative Cloud will ensure that all users will be on the same version of the software, and there won't be any accidental lockouts due to format changes, and no need to run arounf to get the document downsaved. All users also have access to the latest features as soon as they become availble.
For products, such as books and magazines: InDesign needs to be the primary software that you use. When you design the content architecture of your publication, you can employ the following techniques and tools:
Break up your publications into several INDD files, let's say for file for each story.
Compile the individual files into an InDesign book.
Link Ps and Ai or other files when you place them in the InDesign layout. That way whenever a designer updates an asset, InDesign will notify you that a linked file has changed and you can choose to update the link.
InCopy was recently added to the Creative Cloud. Authors can can edit stories without actually having to open the InDesign files. For details see the InCopy help. InCopy has several workflows that can help out in this kind of setup.
Other than the Creative Cloud apps, you'll also need to setup folder and directory structures on the shared storage location.
Setup a shared location/drive so that all users have access to the linked files.
Control read/write access to individual files using the OS commands on the file directory/server. For example, Layout designers only have edit permissions on the layout (indd files); while Photographers can only edit .psd files, and so on. For small teams this might not be necessary, but for larger teams this may help.
You could also consider storing your files using a Content Management System. You'll need to evaluate the cost and benefits properly.
Hope this helps.

Overflow leaders showing up in the wrong place and wrong time.

My Overflow leaders are showing up when they shouldn't be there. When I add enough text in a field that will break to the next page I get an Overflow leader that appears above the text which is what I want it to do. But then there are times when I get to the bottom of the box and there is no more text to go to the next page I still get an Overflow leader that appears on the next page. Not quite sure how to fix this. Anyone else have any difficulties with this happening?

Hasn't anyone experienced odd things happen with overflow leaders?

The Good Wife and football time change - video recorder problem

For the last 3 weeks I have been getting half of the Good Wife recorded because the football game on Sundays has backed up all the evening programs 35 minutes. I am furious with CBS for extending the football game so people cannot record the programs.
I just spent one hour with a Verizon "help" person setting up the Manual recording for The Good Wife from 9:35 to 10:35 pm. It looks like I may see the whole show next week but it says "not available" at the end. I do not feel too confident that this will work and I cannot speak to anyone higher.
Does anyone have any suggestions?

I have the same problem with Amazing Race -- every Sunday, CBS runs late with football which pushes back 60 minutes and subsequently everything else that evening.
What I've taken to doing for any show on a channel which follows football (Sunday or Monday night) is setup a Series recording and then go back into the series a modify it and extend the End Time by 1 hour (I found most games only run over about 20-30 minutes but usually no more than an hour -- although to be safe you could add 90 minutes to the end if you really want to).
This results in recording the end of the previously show before the show I wanted to watch on nights when the game runs late which I can just fast-forward over) or an additional hour on the end of the show on nights when football somehow manages to end on time -- but that's not all them much space on the DVR and as a result I don't miss any of the show.
I would love if one of these days the guide providers and the TV channels could provide real time updates that the DVR's could leverage and adjust their recording times on the fly, but alas that doesn't seem to be in the near future. Of course, I've also complained to the networks that since football always seems to run over by at least 20 minutes -- why not just make the football time slot 30 minutes longer! (and on nights with a shorter game, fill the extra time with an extended sports wrapup show or something).

Is there a way to enter an event time in Calendar as a reminder for me and NOT have Calendar erase it in the info as it reads it into the event start and end times?

Calendar can recognize and derive event start and end times from the text description entered. However, when it seizes on a time (start and/or end) and automatically enters it as the start and/or end time, it also (sigh) deletes the time from the text. I enter the times as reminders for me, how can one prevent them from being deleted by Calendar??

I am having the same darn problem. I really dislike this auto feature in Calendar.
Can anyone help us please?

Enabling the Active Dataguard and Real Time Apply

11.2.0.2 on AIX
I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right?
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?

I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;
The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right? Yes, It will be in both recovery / realtime + Read only mode, Also you can use
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?Yes. It will be in just recovery/real time mode.
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?It has multiple options based on startup type
For this example check link of Julian Dyke.
http://juliandyke.wordpress.com/2010/10/14/oracle-11gr2-active-data-guard/

Hwo to obtain the DST start and end times

Hi all -
Is there a way in java to obtain the day light saving start and end times for a certain year for US?
I know that US DST changed in the year 2007 so, I am wondering if I can get correct DST start and end times for certain period before 2007 and after 2007.
I read online that JDK preserves historical DST rules so I am hoping this is possible but do not know how.
Thanks,

Any idea is appreciated [otehr than incrementally iterating through each hour of the year to know the transition time !!!! )
That's why I mentioned +dichotomy+ (EDIT: the english wording is +binary search+ ): set the initial date to Jan 1st, 00:00, then add 183x24 hours (half a year), if the hour has changed (which it will), there was a DST change in the first half of the year. Then substract 92x24 hours (a quarter of a year) from this new instant, if the hour has changed, the DST change was in the 2nd quarter, else it was in the first. Then add or substract 46x24 hours,... and so onEdited by: jduprez on Feb 2, 2011 9:15 AMWARNING: for anyone reading this in the future: this algorithm is flawed, unless there is further guarantees in the problem domain of DST rules:- if the DST shifts (up +1 hour then back) are less than 6 months apart (obviously it may occur, with a one day margin)- and if in some odd timezone DST shifts may occur around mid-yearThen the first binary chop could find the same hour at both ends, and miss both shifts.My apologies for posting not-well-thought suggestions...

Breaking Dawn – the newest of the Twilight series and In Time

Similar Messages

Maybe you are looking for