Breakpoints not breaking

I have a JavaFX project running in the mobile emulator through NetBeans 6.5. Several of the classes used are Java classes being called from the Main.fx.
When I set a breakpoint in Main.fx it always triggers, but if I set it anywhere in any of my Java classes it never does. I've tried this many times. I know for certain that the code is being evaluated at the break point, it just isn't breaking. I can even break it in Main.fx then step through to the point I wanted!
Is there a better way?
Thanks in advance for any responses.

auxone wrote:
Thanks for your responses. I never realized I would have found a bug.
It blows my mind to think of what I would do if I didn't have breakpoints and step throughs. I will just wait patiently, while I make tons of println() calls.Debuggers are brilliant! Once touched never the same again.... don't feel strange that something called a debugger has found you a bug? It's the real deal and have fun with them in the future,

Similar Messages

Breakpoints not breaking in xcode

When I set breakpoints in xcode by clicking in the gutter, the code runs right by them and does not stop. I am in debug mode, so it is not something that simple. When i start the code all the breakpoints turn orange. Is there some setting or something I need to enable to get breakpoints to work?

Like Alex, I have problems with gdb not stopping at some of the breakpoints I set. I do recognize the difference between Build&Run and Build&Debug, and I am using the latter. Sometimes the debugger stops where I put a breakpoint, sometimes it stops, but on a different line, sometimes it doesn't stop at all, and sometimes it won't let me place a breakpoint on the line I want.
As one would guess, it helps to write one statement per line, break up complex statements, and expand macros. Even so (and also turning off code optimization), I still find that a lot of my breakpoints just won't work. And then, there are the frequent occasions on which the debugger stops at a breakpoint but then dies and gives me no useful information, or shows a nonrecursive function calling itself, or tells me a variable is out of scope when it clearly should be IN scope.
Frankly, I waste less time creating my own debugging statements than trying to figure out what gdb is doing. That's disappointing, and I wonder if there are some good resources on learning to use Xcode/gdb more effectively? Is there, for instance, a reference that explains messages like "Frame identical to previous; corrupt stack?" and provides some hints on what classes of bug are likely to elicit particular error or crash modes?
PowerBook Mac OS X (10.4.8)

JCOP Tools 3.1.1b: Debugger does not break, what am I doing wrong?

Hey everybody
I'm desperately trying to debug applets using the JCOP Tools 3.1.1b but when I start the applet in debug mode, the debugger does not break on the breakpoints I set. You might know the little ticks that appear on top of each breakpoint bullet in the editor. The strange thing is that these ticks do not even appear.
I tried various versions of eclipse (3.1.0, 3.1.1, 3.1.2) and WinXP as wells as Linux. Does anybody else have the same problem or even a solution?
Thanks
Jonas

hello,
here are few steps you should check:
- when you start the debug session JCOPShell will load the applet into the simulator. You have to first make sure the applet is loaded with debug info. JCOPShell should do that by default, but check on the trace that "upload" command is called with the -d option:
upload -d "G:\glut-wks\JC\bin\helloworld\helloworld.cap" - then JCOPShell will install the applet with the "install" command. At that stage only the install function (and of course the constructor of the Applet) will be called. So breakpoints located in other part of the code won't break. Check the trace because if install is not called no applet code will be running.
- after installation, applet must be first selected to get any of its code running. Use "/select |appletname". If you have a breakpoint at the beginning of the "process" method, it should break. if the Applet is not selected all future APDU will go to the cardmanager, and applet code won't be running.
hope this help :)
E.

Not Breaking the loop but how to continue with the next iteration in a For

Hi all
i have the following piece of code
Please let me know, what is the /*some construct*/ which will not break the loop but goes to the next iteration skipping Login b
Loop
Login A
/*some construct*/
Login B
End loop;
P.S
I should do this without Label or Exception ... I am using oracle 8i
Thanks
Hariharan
T

An [url http://www.oracle.com/pls/tahiti/tahiti.tabbed?section=48911]IF statement?
loop
login_a;
if false
then
login_b;
end if;
end loop;Regards,
Rob.

While loop not breaking?

I'm writing a parser for some text files.
My setup looks like so:
public void parseFile(String fileNameIn) throws IOException{
        BufferedReader br = new BufferedReader(
                new FileReader(fileNameIn));
        String line = null;
        line = br.readLine();
        while(line != null){
            //do a bunch of stuff
            line = br.readLine();
}I hit a line that == null when I am parsing and for some reason it is not breaking out of the while loop? I have no idea why.

Sch104 wrote:
I hit a line that == null when I am parsingNo, you don't. That condition causes control to exit from the loop when it reaches the end of the file. A line of text can't be null. Perhaps it might contain zero characters, or only white space, but that doesn't make it null. If you want to break out of the loop when you reach an empty line, you'll have to write a test for an empty line.
(Don't worry about what ibanezplayer85 said. Your code is perfectly good for processing a text file, it's equivalent to what he/she posted. I think your version is easier to understand, but you will very frequently encounter his/her version in code so it doesn't hurt to understand it, though.)

Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed

Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed ?

You didn't look hard enough:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149

ExtendScript Toolkit does not break on breakpoints

For some unknown reason most of the breakpoints are turned off when running a script.
Clearing the preferences did not solve the problem.
Any suggestions?

Hello.
Is breakpoint mean red point in left gutter?
when I want to create breakpoints, always use this.
$.bp();
or
$.bp( /*statements*/ );
ex). $.bp( i%3 === 0 ); // break if "i" is multiple of 3
mg.

Program does not break at breakpoint inside stored procedure

I am using VS 2013 and SQL Server 2012 calling a stored procedure from a C# program. I have a breakpoint set inside the stored procedure, however execution does not stop on it. When my program is running, the breakpoint is hollow (not solid red) and the
tool tip reads "the breakpoint will not currently be hit. No symbols have been loaded for this document".
I built my app in debug mode and checked "SQL debugging" in the debug tab.
Any idea as to what would cause my breakpoint to not work?
Thanks!
-A

Hi achalk,
When debugging SQL Server stored procedure in Visual Studio 2013, please make sure that Application Debugging is selected in "SQL Server Object Explorer", otherwise you will not be able to step into T-SQL.
There are similar articles for your reference.
Debug SQL Server 2012 Stored Procedure in Visual Studio 2013, Step by Step
http://database.ca/blog.aspx?blogid=10
How to debug SQL Server T-SQL in Visual Studio 2012
http://stackoverflow.com/questions/12016417/how-to-debug-sql-server-t-sql-in-visual-studio-2012
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Breakpoints not firing

Hello Dev's,
I am having a problem in only one project and I have even tried to recreate the project with no success but previous projects created years prier (made with previous versions of FB) are not experiencing this.
I am trying to place breakpoints on functions in deep rooted classes (a class that is loaded by a class by a class, its a smaller component from a greater project) which I know is firing as I see the results on the screen.
However the break point does not fire and remains a blue circle, indicating it won't fire. If I remove and re add the break point while the app is running, it will become checked but once I run the debugger the break point turns back into a blue dot.
If I put a break point in one of the first lines of the application class, like in it's constructor, it will trigger and then my deeper break points will fire. But if I don't make this out of the way break point (in the main class) the following break points are not firing.
Thoughts?
Flex Builder 4.5
SDK 4.5.1
Debugger 11.6.5.635 (in FireFox)

I haven’t seen that before, but in theory would be possible if several SWFs are being loaded and you get a class collision and the breakpoint in the app changes the timing of the loaded SWFs.

Ksld not breaking into source file

Hi guys,
I installed ksld and started debugging my driver using a tip connection... all works fine.. i inserted a breakpoint on one of my functions in the driver.. and in the tip console once i have reached the breakpoint.. i use ::remote to enter remote mode and start the ksld with all those options on the host and it get connected to the ksld agent.. but the host is not able to show the source code of my driver... ie it always breaks into the asm dump of the driver code.. how do i switch to source display.. but at the same time i am able to edit the source file and all.. ie by using edit command.. but no idea why the asm code is dumped while a break point is reached..
any idea how we can switch to source level code for debugging..
thanks all

The simple answer here is that machine specific files do not need to be checked in. This includes .PSS and .CPD files. The .HHP and .XPJ files are not machine specific, they are project specific and therefore must be checked in. The confusion over the HHP file may come down to whether CHM output is being produced. If you are not, you could safely say that this file need not be source controlled. However it doesn't cost anything to include it under source control so why make life more difficult by excluding it.
The RoboColum(n)
@robocolumn
Colum McAndrew

External breakpoints not working

Hi,
I am working on a CRM 7.0 (SAP_ABA 7.01 SP 6) system and my external breakpoints are not working.
If I set an external breakpoints for my user in a component method or HTML page and I log onto the CRM Web UI
the system hangs. The same happens if I switch on the debugging directly in the component
without breakpoints. I have the same behavior for breakpoints in Web Dynpro code, when I try to execute a WD application.
Breakpoints in ABAP reports are working fine, so I don't think it's a problem of authorities or roles, should be something
with the HTML debugging. I worked on other SAP CRM 7.0 systems before and never had this problem before.
Somebody can help or has an idea?!
Thanks.
Best regards,
Oliver
Edited by: Oliver Pregler on Aug 6, 2010 1:57 PM
Edited by: Oliver Pregler on Aug 6, 2010 1:58 PM

Hi Oliver,
Which component and view u are setting the break?
Are u sure that u are setting external break-point?
Is there any error/exception?
Try to set and infinite loop and debug using trx. sm50. If ur scenario is totaly standard create an enhacement point to set the infitine loop.
DO.
if sy-subrc eq 123.
exit.
endif.
ENDDO.
Hope with the code above u be able to debug.
Best regards,
Caíque Escaler

ZCL_IM_COM_PARTNER_BADI - not breaking on break point.

I have implementated a BADI but the methods
IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_1,
and
IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_2,
and
IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_3
are not been called and when I but a break point inside IF_EX_COM_PARTNER_BADI~DETERMINATION_ADD_IN_3 it doesnt break during the creation of service oder.
Kindly assist.

fill in your batch sequence=10, dialog seq.=10 if it's the first access.
If your source is COM_PARTNER_X, then go to se18, enter badi=COM_PARTNER_BADI.
If you already created implementation, should find it under implementation menu -> overview and select your implementation. Otherwise, create a new one.
Then go to interface tab and click on DETERMINATION_ADD_IN_1 method. Implement your source codes here. Put an external breakpoint for testing.
Dont forget to assign your access sequence in the 'Partner function in proceudure' in partner determination procedure.
Lastly, assign the partner determnation procedure to your service order trx.

Apex 4.1 remote debugging with dbms_debug_jdwp - breakpoints not working

Hi all,
I'm using remote debugging with sqldeveloper like described here:
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/remote-debug/index.html
http://sueharper.blogspot.com/2006/07/remote-debugging-with-sql-developer_13.html
It works great with my sqldeveloper 3.0 and Apex 4.0.2
Now i tried the same on two other servers with Apex 4.1
The debugger is connecting. I can see the connect and diconnect message in the debug windows in the sqldeveloper.
But the breakpoints are not working.
Is the debugging working in Apex 4.1 for anyone here?
Any ideas why the breakpoints are not working?
BR,
Björn

Hi Björn,
In your APEX application, have you tried updating the URL to include the parameter REMOTE, in order to initiate the remote debug connection? e.g.
f?p=100:1:&SESSION.::REMOTE::Using the REMOTE parameter cuts out the need to specify debug code surrounding statements in the APEX PL/SQL.
The steps are as follows:
1) In SQL Developer, set break points in the the PL/SQL code, and compile using the "Compile for debug" option
2) Execute the following two grants
grant DEBUG CONNECT SESSION to <PARSE USER>;
grant debug on <PROC> to public; <-- might not need public but just whoever the DAD is running as.5) In SQL Developer, right-click on your connection and select the "Remote Debug..." context menu item. This will launch the "Listen for JPDA" dialog.
5) Run the APEX Application page containing/activating the code you wish to debug, and update its URL with REMOTE in the debug parameter of the URL, and then hit Enter.
6) Carry out the action on the page to trigger the breakpoint in your code e.g. submit the page, or click a button on the page, and you should be redirected to the breakpoint in the code in SQL Developer.
Although I'm running with the latest release of SQL Developer, version 3.2.2 (http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html), and APEX 4.2, the 'REMOTE' parameter was introduced with our 3.1 release so will also be available for you to use in 4.1.
Regards,
Hilary

Breakpoints not working when debugging OC4J web service

I am attempting to debug the PL/SQL web service autogenerated as part of the EMP_FETCHER tutorial example. My code has been compiled with debug information and the classes I wish to debug are not in my exclusions list.
When using the embedded OC4J container, I've verified that it is starting up in debug mode in the log. Setting breakpoints in the Emp_Fetcher class on the line commencing
__sJT_st = __sJT_ec.prepareOracleCall...
however seems to have no effect. Running my web service client does not cause the web service to stop on the selected breakpoint.
I've also tried remote debugging of the same web service on a separate database server. While I have been able to start OC4J on the server in debug mode, and connect to it from JDeveloper, setting of breakpoints seems to have no effect. I've monitored the TCP traffic on port 4000. It shows activity during the initial connection, but no traffic when I manipulate breakpoints in JDeveloper. I would have expected some traffic as breakpoints are added and removed.
Any assistance would be appreciated.
Regards
Michael

Hi Mithun Dha
I am facing same problem !
please let me know what is SICF user name and how to change it ?
I am using MSS PCR application (MSS role, Personal Change Request which is standard application on portal and it calls BADI at backend, it was working fine till yday suddenly its not stopping at the ext breakpoint in BADI)
thank you
b

Table not breaking on pages

Hey all,
I'm building a document that has a long table on it with content in two columns. Basically it's a storyline on the left and technical notes on the right.
The problem is that Pages seems to break on table rows, creating gaps on some pages because the next row doesn't fit on the page.
Is it possible to have Pages break the row and fill the page (and continue on next page)? Or can't this be done?
Thanks already for the help!

Sorry its a bit late, but may be of some use...
Numbers (I've found) can do it, but it's only ok while you are in Numbers. As soon as it's put into pages, it does the same.
I'm trying to do the same, but on Ipad3. Google does give examples of how to do it with a Mac...

Breakpoints not breaking

Similar Messages

Maybe you are looking for