BRF+ Standard Integration into ICM

Hi gurus,
here:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/5f/b367185c4f41ccbdeb4e383d516a68/frameset.htm
is a guide on how to enable BRF+ to be used as a valuation or remuneration tool in the ICM through the customizing.
However, after doing all that, it creates some dataelements and structures in BRF+, but I can not find a way how to use those in a formula or decision table, and how those would be implemented again in ICM.
I have found that in General Tools you can create a LOS Category for Business Rule Editor, but not how to actually select any formulas.
There is very little to no documentation about this, maybe SDN can help?
Best regards.

It seems there is not much knowledge about this? There is also no documentation anywhere else as far as I have seen.

Similar Messages

Problem with Print functionality in the BI reports integrated into portal

Hi,
We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
Please help me in resolving this issue and points will be rewarded for sure
Bala

Hi Edward,
Can you clarify on your statement "You can run 3.x queries normally". I am currently declaring the bex web application string in the BW iview created in this format "infocube=0D_FI_C01&query=0D_FI_C01_Q001" and i am not defining the report template anywhere in the iview properties but still the standard template is displayed.
Pls let me know how to run 3.x queries normally.
Also i am trying to integrate only reports which are developed for BW 3.x format in BI system but still the data is not displayed.
Pls let me know incase the SP level of both EP and BI portal are to be considered for this.
EP 7 portal is on SP9 where as BI 7 is on sp12.
Also i noticed the EP portal doesn't have BI Java Addon. will this matter for displaying reports in BW 3.x format.
As you suggested workaround i tried to create a url iviews directly taking the links from the reports displayed in BI portal , i was able to preview the report but when i added those iview reports to role, the reports are constantly loading as it is trying to contact BI system. There are being loaded constantly with nothing displayed on screen.
"http://sapbw:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_PU_C01_Q011&VARIABLE_SCREEN=X&DUMMY=1"
regards
Bharat

Jheadstart will be integrated into Jdev 9.0.5

In JHeadstart new feature direction, it will be
integrated into Jdeveloper 9.0.5, that is when Jdeveloper
released all body needn't to buy standalone JHeadstart
like now.
Is this thinking right or wrong ?

Ok, I think the confusion is caused by an unfortunate phrasing from our side. What we meant with "integrated in Jdev 9.0.5", is not that JHeadstart as a product will be gone. All we meant to say there is that we will make JHeadstart compatible with jdev 9.0.5 and ADF.
The JHeadstart team is thrilled about the ADF initiative, we think it is great technology. With JHeadstart we will 100% align with ADF, but Jan is right we have to work out the details of what this exactly means. Here is a summary of our current plans:
Our first goal is to release a new JHeadstart version end of August (2003) compatible with the current jdev production version
(9031/904). As you probably know, this release adds support for JSP and Struts. UIX and MVC Framework support will stay in.
After this release, we will focus completely on ADF integration. We have identified the following integration areas:
- Use ADF data binding. We have to look in more detail into the ADF binding, but as we see it right now, some of the more
trivial JHeadstart mvc processes/struts actions can go away, like BrowseDataSourceSet and HandleTableEvent. Standard actions
like browsing, scrolling and save one record can be done declaratively with ADF data binding. However, more complex save
actions like we support in SaveDataSourceSet will remain.
- Add ability to use JSTL and EL in generated JSP pages (in the upcoming release, we use all Struts tag libs)
- Replace our custom BC4J generator with the Designer BC4j Generator within the JHeadstart Designer Generator
- Upgrade MVC Framework to ADF controller (ADFc) (Note that ADFc will not yet be available in 905 preview).
Apart from ADF integration, we would like to enhance the JHeadstart Application Generator significantly in future releases, for example, generating wizard style layouts, multi-select LOV's, shuttles, unlimited nesting of groups, etc.
In summary, some of the JHeadstart runtime components and some JHeadstart handler functionality will become obsolete with ADF.
However, the Application Generator, driven from the JHeadstart application structure file and ADF meta data, will remain a significant productivity booster, as well as some of the more sophisticated JHeadstart Struts actions.
Also, the JHeadstart Designer Generator adds significant value on top of the Designer BC4J generator: it allows you to
migrate not only the Model, but a complete application including the View and Controller.
One of the really nice things of JHeadstart-ADF combination is that after you have generated a "second-cut" application
with Jheadstart, you should be able to use the ADF Struts visual page flow modeler and ADF layout editor to pick up the generated
struts-config, and generated uix/jsp pages and finish off your application with visual aids.
Hope this clarifies a bit how we see JHeadstart with respect to ADF.
Steven Davelaar,
JHeadstart Team.

BRF Plus integration to CRM

I am interested to know whether BRF Plus will be fully integrated into CRM in EHP2? Currently the list of applications currently is Loyalty Management, Territory Management and Real-time Offer Management, however I wish to use BRF Plus in the Sales and Service scenarios witin CRM7.0. Will this be available to me or will I have to code the integration into the processes myself? Have you any documentation to help to code the integration if it is not there for me to use?

Hi Richard,
I had a chat with a colleague about this and he showed me a chapter 10 in the book "Practical Workflow for SAP".
There you find a description of eventing and exit technologies for CRM, HCM, FIN, ...
Those are all free of modification and allow you not only to use workflow but with a little glue code to also call BRFplus. The glue consists of a call into BRFplus - handing over relevant data and taken back results. This is something that you can also find in several papers in SDN.
BR,
Carsten
P.S. Maybe also the book "BRFplus -- Business Rule Management for ABAP Applications" is interesting for you. Will probably be out Q3 2010.

Set type problem in sales order integrated into loyalty management

Hi experts,
I try to implement the sales order integrated into loyalty management. As notes said, I should use the set type REWARD_PRO_LOY to assign to a hierarchy for loyalty. But when I use this set type in hierarchy, I found I can only assign it when I choose "service" for product type. Then I find in the "REWARD_PRO_LOY" set type, there is a switch tab. In the tab, there is only "services". I don't understand this tab means. I want to assign this set type to "materials" type. I tried to created a new set type with the same attributes, but it seemed not to work. Is anybody can give me some advice to solve the problem?
Thanks a lot,
Best Regards,
Molly Xin

Hi Molly Xin,
If you refer to your first screen print, its very evident that the product types with which products be created using this set type includes both "Materials" and Services".
We have created similar scenario and were able to create products with product type "Materials".
Pease let me know if you have any issues while creating products with product type "Materials".
Regards

How to preserve data when converting a Standard DSO into a Write Optimized

Hi,
I'm looking for proven strategies for preserving data when converting a standard DSO into a write optimized DSO. The data has to be dropped before the new DSO is transported into the environment.
1. The DSO is currently in synch with a cube,
2. The PSA does not have all the data which is in the DSO.
3. Data volume is incredibly high for a full reload from ECC, so we'd like to avoid that option.
Appreciate any help!

Hi Gregg,
have you considered just deleting the data? I know that sounds simple, but it might be a valid solution.
If the DSO is just receiving new data (e.g. FI documents), you can continue to deliver a logically correct delta to the cube.
Should that not be possible and you really want all data that you currently have in your DSO1 in the write optimized future of it, then how about this:
- Create a new DSO2 same structure as DSO1
- Load all data into that
- Delete all data from your DSO1 and import the transport to make it write optimized
- Load all data back into you now write optimized DSO1 from DSO2
The problem you have then, is that all data that you have already loaded into your cube is due to be delivered as a delta from DSO1 again.
Depending on your transformation / update rules that might or might not be a problem.
Best,
Ralf

Adobe flash 11 installs but not integrated into ie8

I have an XP/32 SP3 system using IE8. I use the latest Avast, and have realplayer 16. I temporarily disabled all add-ons today, and subsequently I have been unable to re-enable as the entry has disappeared from the list of add-ons. I have uninstalled and re-installed IE8, ditto with Adobe Flash using the Adobe Flash removal tool, and then re-installed the latest IE version. I have used the Flash test option and the screen is just greyed out. So clearly although there are no error diagnostics during the install, the add-on is not being integrated into IE8. Hence URLs that require flash show an error.
All M$ updates uptodate.
What could I try?

Thanks for your reply - I did delete the flash/macromed directories as suggested by Adobe prior to the last re-insatll. Here is a screen grab of the flash directory as now.
Shockwave is not appearing as an add-on in IE8.

3rd party adapter integration into XI

Dear Experts
I wanted to know how 3rd party adapters are integrated into XI?

Hi Dheer,
There many third party adapters available in market.
One example is seeburger:
U need to follow the below steps for integration into XI:
For the same requirement you need to follow the below steps:
1) First deploye the Std seeburger mapping provided by see burger on XI
2) If you are using the AS2 adapter then you have to install the AS2 server on XI server.
3) Once you install the std seeburger on SAP XI server you will see the AS2,X400,OFTPS,VAN adapter on XI ID.
5) You need to call the std mapping in the adapter module which does the conversion from EDI to XML and XML to EDI.
if u need process then let me know I will send u the configuration threads which is required for integration.
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Brief about seeburger:
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
refer belwo weblog:
/people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
Thnx
Chirag
Edited by: Chirag Gohil on Feb 25, 2008 12:51 PM

Build Error While importing standard application into NWDS

Hi all,
I am trying to Import T&E Standard Applications into NWDS.
Two components (tra & tra/tre) have to be synched to the studio. These two are interdependent..
One Component I am able synch and create project perfectly but when i try to do the second one, i am getting Generation BUILD Error...
Help me in this regard..
Thanks
Malla
Edited by: challa mallareddy on May 7, 2009 12:34 PM

Hi,
As per your error, I think you have already created a project with name NewParProject. Give a different name and then check.
Also check if your par file is not corrupt. Download it again and follow below steps in NWDS :
Go to File>Import > Select par file >
>Browse and select the par file>
>Give a project name i.e. ParProjectTest > Finish.
This should work.
Regards
Deepak

How to call Report 6i/9i Oracle Standard Report into Discoverer 10g

How to call Report 6i Standared report into Duscoverer 10g as there is a requirement to create or transfer Oracle Standard report into Discoverer.
1) Account Analysis Subledger Details(180 Char) - Standard Report 6i as i want the same report in Discoverer 10g.
2) Aging Report -- 7 bucket --Standard report in 6i,how to transfer in Discoverer 10g.
Is is possible to Transfer from Report 6i to Discoverer or How to Create this report in Discoverer 10g.
Please advice,
Sushant

Well, if I had to do it, here's how I'd start.
1. Get the SQL from the Oracle Report and then create a database view that's more generic based on the SQL but still gets the answers.
For example, you'd not code many conditions, etc. but the database view would be pointing to the correct Oracle Apps tables / views.
Once you've got the view, bring it in to Disco Admin, etc. and create a report from it that now adds the extra conditions needed. That way you can use the underlying concept without hard coding things like dates, etc. which you would ask the user at run time.
However ... as you may well know ... Oracle Reports can do some 'strange and/or powerful things' on the fly and, for example, it may be something like a temporary table generated for the report, etc. so may become a much bigger issue.
2. If you have NoetixViews views then they'll most likely already have the views for these queries already created as they're reasonable for what's needed in an Oracle environment.
3. I'd see if there is already a pre-defined BIS view that covers this as well. Again, you're in an area that's pretty popular so if a BIS view already covers much of the same info then you've got a create view 'head start' already. Check views owned by Apps starting with the application plus FV or FG (the one you'd really want) such as: GLFG_Budgets_To_Actuals to see what I mean.
Russ

Proceedure to copy the standard BAPI into ZBAPI

Hi Gurus..
I found the standard BAPI and I want to copy the standard BAPI into ZBAPI(for my company purpose) and use it in SAP xMII.
Please give the steps for copying.
Thanks
R M

Hi,
To copy the standard BAPI into ZBAPI.
check this link:
how to copy BAPI
How to Copy standard BAPI to ZBAPI....
Regards
Adil

Break sap standard role into two sub roles

hi,
i have one SAP standard role. now i want to break this role into two sub roles. how shall do it.
please suggest me.
regards
ramesh
Edited by: Ramesh Sammiti on Jul 31, 2008 11:00 AM

Hi Ramesh,
When you say that you want to split the SAP Standard role into two roles:
1.Do you mean to say that you want to split the transactions and authorization data of the SAP Standard role into two separate Z* or Y* roles?
2.Do you want to copy the SAP Standard role into two different Z* or Y* roles and then modify the authorization data according to your company's requirements?
In the above two scenarios you must copy the SAP Standard role into Z* or Y* roles in PFCG transaction with the appropriate naming convention and make necessary changes in both the transaction data and the authorization data.
Please be clear which SAP Standard role you are willing to split into roles and i can provide more details.
Hope this helps.
Regards,
Kiran Kandepalli

Strong DITA integration into FM Technical Communication Suite

My motivation to vote for a strong DITA integration is that I can imagine the FM Technical Communication Suite as an very appropriate tool to support the DITA Learning and Training Content Specialization in a smart way.
That's important as on April 1, 2008 the DITA Technical Committee has approved Design Proposal 12058 for inclusion of the DITA specialization for learning and training content in the formal design plan for DITA 1.2.
My long-term vision for the FM Technical Communication Suite is, for example,
* write your quiz is FM and use it in Adobe Captivate
My short-term vision the for the FM Technical Communication Suite is
* improve the usability of the DITA plugin for technical writers
Looking forward to a user-to-user discussion about which smart DITA integration into the FM Technical Communication Suite.

b Smart Language Identification
GOAL
FM DITA plugin uses the xml attribute for language identification
to set
Proposal
The language identification attribute is
xml:lang
see
http://www.w3.org/TR/2000/REC-xml-20001006#sec-lang-tag
A scretch of an implementation:
Change the entry for the attribute xml:lang in the related EDDs from
Name: xml:lang String Optional
to
Name: xml:lang Choice Optional
Choices: en-US | de-DE
Default: en-US
Note: en-US means language(englisch)-country(USA)
A smart integration would
* language-country codes for all combinations supported by FM
* May be the drop-down list of
ParagraphFormatting/PropertiesFont/Language
can view the lanuage-country codes, too
* TextFormatRules similar to this one are necessary
If
Specification Concept[xml:lang="de-DE"]
ParagraphFormatting
PropertiesFont
Language
Deutsch
Well, my current workaround is I add a version of the above TextFormatRule to all elements which are specificied in the 'info-types' variable of the topic.edd
Any smarter workarounds known?

Arabic script integration into UPK simulations

A few questions on whether Arabic text integration/import* is possible in UPK:
1. Does UPK allow integration of text in languages that it does not provide translation support for, such as Arabic?
2. How can Arabic text integration into the Show Me, Try Me, Test Me scripts be performed?
a. Is this a manual process, where the text will need to be copied and pasted into individual callouts/text boxes?
b. Is it automated in UPK? If yes, what are the steps to import a translated Show Me job aid in Arabic into the simulation?
3. What additional character/font plug-ins would be required for this? If yes, where are these plug-ins available?
4. Any specific formatting/publishing requirements to be kept in mind for getting the best possible player and job aid output in Arabic?
Edited by: 857307 on May 8, 2011 1:15 AM

Hello,
Please contact Support to ensure you get the most accurate and up to date information. http://support.oracle.com/
1. Yes, UPK supports languages other than the 21 languages provided with the software. Arabic has not been tested with the current release of UPK.
2. I'm not aware of any known issues with Arabic and bubble text.
a. Since we've not done testing with Arabic, I do not know of any issues with typing directly in the bubble.
b. I do not know of any reason why the localization tools in UPK would not work. (Template Editor, Export for Localization, Re-Record topic)
3. Arabic has not been tested, so I cannot comment on font or character requirements or best practices.
4. Same as previous.
Best regards,
Marc

WebUI Integrated into Portal

We have been able to successfully integrate the WebUI into the portal by exporting the business roles and importing into the EP. My question is, when doing this, do we completely lose the L shape navigation area and remain stuck with the old style tabs on top? That was a big selling point for 2007 but we needed to stay in the portal to handle the single sign on to our BI system which we cannot connect to from the WebUI natively. I have another thread on that topic.
I just want to know if there is any way of keeping the slick navigation of the WebUI when it's integrated into the portal. Thanks in advance.

OK I figured out that we can keep the left hand navigation via use of the detailed navigation option when exporting the XML from CRM2007 and importing into the portal. The next issue is that the direct links do not convert correctly. The section is there but there are no links underneath. There were no errors in the import either.
Any ideas?

BRF+ Standard Integration into ICM

Similar Messages

Maybe you are looking for