BRFPlus Rules not working in SAP MDG 7.0 sp2

Hi Experts,
I am working on SAP MDG 7.0 Service Pack 2, and am facing issue in validations created in BRFPlus.
I have created Check Function Validations in BRFPlus, to be applied on the Change Request Screen of customer / supplier of SAP MDG.
The validations are active in BRFPlus but do not appear on clicking the check button
Please let me know if anybody has created validations in BRFPlus and if they are working on Change Request UI of SAP MDG 7.0 sp2 ??

Can you post a screenshot of your BRF+ validation function? Check functions of a certain entity will only be called if something in that entity changed. If you don't change anything, the validation funciton of that entity will not be called.
The simplest way to test if a function is being called, is to add a rule that displays a message always (without condition). You should be able to see your message when you click the "Check" button.

Similar Messages

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

Substitution rule does not work in SAP CRM

Hi,
In our client, we have work flow set up for substitutions. Manager A has specified B as his substitute for approving work flow items during his absence. I checked the table T77S0, WFLOW AUTOF is set to 'X'. I checked the table HRUS_D2, here the entry shows as
User User Start date End date Substitute profile Substitute Active
A B 03/10/2014 01/01/9999 0001 X
However B is not able to receive the workflow items of A. When I tried to forward using SWIA, then B is getting workflow items. Not sure, why the substitution is not working. User A has set up workflow substitute in SAP CRM Web UI.
Any suggestions to resolve this will be greatly appreciated.
Thanks.
With regards,
Ravi

You assigned substitution profile 0001 which is disciplinary or something like that - this substitution profile has no meaning and is only an example. try not assigning a substitution profile or use profile 'all' which contains the 'NO_CLASS' task class which is the default classification for tasks in the system.
you can see substitution definition in SAP Web Application Server → Business Management → SAP Business Workflow → Basic Settings (Organization Management) → Substitute Profile.
see also: Maintaining and Activating Substitutes (SAP Library - SAP Business Workflow)

Alert Rule - not working. Wild Card character issue

Hi All,
I have a requirement where I need to trigger alerts for mapping failures
of all the interfaces whose namespace is urn:abc.com:odna* or urn:abc.com.odna*. (in the first instance, there is dot before odna and int he second instance, a colon before odna )
So to suit both the cases, I gave urn:abc.comodna in the Alert Rule.
It worked before. But now its not working.
Then when i changed it to urn:abc.com:odna* it works again. i really dont understand how it worked before and why it fails now.
What is the reason for the unpredicatable behaviour of WildCard Character based Alert Rules?
Should Wild Card Characters be avoided completely?

Hey
Just create two separate alert rules for the same alert category
one for urn:abc.com:odna* and another for urn:abc.com.odna*.
but before that please make sure that "Suppress multiple alerts of this rule" box is unchecked.
Also please check SAP Note 913858
Thanx
Aamir
Edited by: Aamir Suhail on May 20, 2009 9:16 AM

MRIS Substitution rule not working

Hi
the Substitution rule to populate the Business Place and Section code is working with all other transaction codes like FB60, MIRO etc., but not working with MRIS (Mass MIRO) by which we are facing problem in J1INCHLN. Please suggest regarding.
SAP Marketplace has rejected siting it as consulting issue.
Regards
Prakash.

Bhanu,
Subsitution rule works when you are posting in Financial Accounting tables: BSEG and BKPF. FB60 and MIRO do that.
The report doesn't make post in mentioned tables to get substitution done. Please make sure if there is a existing call transaction or only a planning are being assigned.
regards

ITServer - Internet Service created by us not working in SAP ECC

Hai all,
We have SAP R/3 4.6C and a ITS server 6.1. We created some Internet service and published in our ITS server.
We have ugpraded our system to SAP ERP Central Component 5.0, which has inbuilt ITS server. I published the standard SAP internet service "BWSP" and our own internet services. The problem is standard SAP Internet Service is working whereas the the internet service which we developed is not running.
Before publishing i did the following settings, Utilities => Settings => Internet Transaction Server, in the "Test Service" tab i have selected "Default Web Server" radio button and on "Publish" tab i have selected "On All Defined Sites".
I published the service by selecting Publish =>Complete Service by right clicking on the service name.
When i execute the service using ITS url i am getting the following error
Service cannot be reached
What has happened?
URL http://devnw2.xy.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available
Please let me know what's wrong and what is the solution to correct it.
Regards,
Basha.

Hai Raja,
I tried adding in the entry as below.
The below value i just copied from the service BWSP and put it here and changed the transaction code.
~TRANSACTION     zgeestc017
~THEME     99
~COOKIES     1
~DESIGNS     sap_streamline
~RUNTIMEMODE     pm
~DISCONNECTONCLOSE     0
~FLICKERFREE     0
~URLIMAGE     /sap/public/bc/its/graphics
~URLMIME     /sap/public/bc/its/mimes
~URLARCHIVE     /scripts/sapawl.dll
~GENERATEDYNPRO     1
The below is the full error which i got when i tried to run the service after doing the above change.
What has happened?
URL http://devnw2.abc.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system D00 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:devnw2_D00_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards,
Basha.

Shift+F2 not working in SAP GUI for ITS

Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
Kavitha

ITS THE PROBLEM IN DEV NOT IN PROD ECC SYS

GoFunctionKey not working in SAP SRS application

Hi Friends,
I have been working on SAP SRS application which is created in Web Dynpro Java and some ABAP part too.
It 7 dcs.
The main dcs are: isisrsrsgrbcsap.com, isisrsrsgrappsap.com and isisrsrsamsap.com.
ScanView is a view which inside a Web Dynpro Java Component ArticleComp which is inside the dc isisrsrsamsap.com.
The ScanView has 4 buttons:
1> Go button,
2> Cancel button,
3> Overview button
and 4> Advanced Search button.
The ScanView has 5 functionkey for mobile devices:
1> GoFunctionKey,
2> CancelFunctionKey,
3> OverviewFunctionKey,
4> AdvancedSearchFunctionKey
and 5> BarCodeReader.
The GoFunctionKey is not working.
It has keycode PI_MaterialScanFk.Search_Go which gets the value 13 from a RFC.
The onAction event of the function key GoFunctionKey is:
public void onActionScan(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String scanData )
    //@@begin onActionScan(ServerEvent)
     //wdComponentAPI.getMessageManager().reportSuccess("Scan value: "+scanData);
     wdContext.currentPi_Mat_EanElement().setEan_Upc(scanData);
     wdThis.onActionSearch(wdEvent);
    //@@end
The onActionSearch event for the Go button is onActionSearch :
public void onActionSearch(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSearch(ServerEvent)
     wdThis.wdGetArticleCompController().scanArticle();
     if (wdThis.wdGetArticleCompController().getSizeMatList()>0) {
          wdContext.nodePi_Mat_Ean().invalidate();
          if (wdThis.wdGetArticleCompController().getSizeMatList()==1)
               wdThis.wdGetArticleCompController().goMaterialResult();
          else
               wdThis.wdFirePlugToDispatcher(INavCodeConstants.NAV_CODE_COPY);
    //@@end
So, internally GoFunctionKey calls the function of the Go button.
But nothing happens when client clicks this Enter button of the mobile device.
I am planning to debug the code by putting some breakpoints but it would not help.
I have already tried to print statements inside the onActionScan by using wdComponentAPI.getMessageManager.reportSuccuess();
but nothing is getting printed as the action is not getting called.
There are some changes done in ABAP side but no customization done in the java side.
Also, the mobile devices used are given below:
http://emobilescan.co.uk/downloads/manuals/ppt8800.pdf
Please show how to approach and solve this issue.
Thanks & Regards
Kaushik Banerjee

Hi,
I have not worked on mobile development but are you sure wdComponentAPI.getMessageManager.reportSuccuess() works on mobile devices.
Also you have called a method of your Comp Controller in onActionSearch. Check if it might be throwing an exception that is not being printed.
Regards,
Himanshu

Web Templates shortcut Not working in SAP Browser screen

Hello All,
I am facing a diffrent issue with Business Explorer Browser 3.x.
When I try to open shortcuts which is for (Web templates) created in Business Explorer Brower 3.x they are not working properly.
The addres stored for this web templates misses the server address in between.
All the web templates were working fine before Support Pack upgrade. We recently has upgraded to SAP BW 7.02 support pack 7.
I am not sure if this is support pack upgrade issue. Would like to know if someone faced same issue and how did they fixed it. is there any way to modify those address on PROD directly.
Many Thanks,
Vaishali

Hi Vaishali,
We also faced the similar issue and I contacted my basis team they have done some configuration in tables related to basis and then my web templates started working fine. I guess this is general issue which occurs after upgrade.
I don't know the exact solution but you can check with your basis team.
Regards,
Durgesh.

Unable to embed External CSS file, dropdown list,filter panel and dimension filter are not working in SAP Design Studio Tool

Hello Everyone,
I am new to SAP Design Studio. I am working on creating dashboards and I am using Design Studio 1.2 version. Please suggest some solutions for the following issues. Thanks in Advance.
1. External CSS file which is embeded using custom CSS option under "application component properties" is not working.
* I kept the external CSS file inside repository-> my application folder.
2. During runtime, getting javascript error while selecting '-' option from filter panel.
3. Unable to select or type dimension name under "dimension filer component" properties.
4. Getting runtime error for dropdown list, and I have inserted the following code under "onStartup" option of Application component properties.
"DROPDOWN_1.setItems(DS_1.getMemberList("PRODUCTREF", MemberPresentation.INTERNAL_KEY, MemberDisplay.TEXT, 20));
and dimension values are not populated in auto suggest."

There should be an Error Log under View > Error Log that gives you more details of these errors. Could you add that? There is also a View > Script Problems log that provides more details as well.

CJ20N is not working in SAP ECC 6.0

Hello Everybody.
In my SAP ECC 6.0 I log in SPANISH and launch tcode: CJ2ON - Project Builder and it transaction code does not work my session hangs and the message in the status bar is:
STARTING APLICATION PROJECT BUILDER (English)
Inicio Aplicación Project Builder (Spanish)
For my Customer is a must to use this tcode in Spanish. In English this transacction works fine.
Here the level components:
SAP_BASIS | 700 | 0006 | SAPKB70006 | SAP Basis Component |
SAP_ABA
700
0006
SAPKA70006
Cross-Application Component
PI_BASIS
2005_1_700
0007
SAPKIPYJ77
PI_BASIS 2005_1_700
ST-PI
2005_1_700
0002
SAPKITLQI2
SAP Solution Tools Plug-In
SAP_BW
700
0006
SAPKW70006
SAP NetWeaver BI 7.0
SAP_AP
700
0003
SAPKNA7003
SAP Application Platform
SAP_HR
600
0003
SAPKE60003
Human Resources
SAP_APPL
600
0003
SAPKH60003
Logistics and Accounting
EA-IPPE
400
0003
SAPKGPID03
SAP iPPE
EA-APPL
600
0003
SAPKGPAD03
SAP R/3 Enterprise Add-On PLM, SCM, Financials
EA-DFPS
600
0003
SAPKGPDD03
SAP R/3 Enterprise Defense Forces & Public Securit
EA-HR
600
0003
SAPKGPHD03
SAP R/3 Enterprise Add-On HR
EA-FINSERV
600
0003
SAPKGPFD03
SAP R/3 Enterprise Financial Services
FINBASIS
600
0003
SAPK-60003INFINBASIS
Fin. Basis
EA-PS
600
0003
SAPKGPPD03
SAP R/3 Enterprise Public Services
EA-RETAIL
600
0003
SAPKGPRD03
SAP R/3 Enterprise Retail
EA-GLTRADE
600
0003
SAPKGPGD03
SAP R/3 Enterprise Global Trade
ECC-DIMP
600
0001
SAPK-60001INECCDIMP
DIMP
ERECRUIT
600
0003
SAPK-60003INERECRUIT
E-Recruiting
FI-CA
600
0003
SAPK-60003INFICA
FI-CA
FI-CAX
600
0003
SAPK-60003INFICAX
FI-CA Extended
INSURANCE
600
0003
SAPK-60003ININSURANC
SAP Insurance
IS-CWM
600
0003
SAPK-60003INISCWM
Industry Solution Catch Weight Management
IS-H
600
0003
SAPK-60003INISH
SAP Healthcare
IS-M
600
0003
SAPK-60003INISM
SAP MEDIA
IS-OIL
600
0003
SAPK-60003INISOIL
IS-OIL
IS-PS-CA
600
0003
SAPK-60003INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
0003
SAPK-60003INISUT
SAP Utilities/Telecommunication
SEM-BW
600
0003
SAPKGS6003
SEM-BW: Strategic Enterprise Management
LSOFE
600
0003
SAPK-60003INLSOFE
SAP Learning Solution Front-End
| ST-A/PI | 01H_ECC600 | 0000 | - | Application Servicetools for ECC 600
Have you experienced this issue, can you please give your ideas to solve it ?

Hello,
SWUF is workflow runtime system administration? Seems it disappeared in 4.6 or 4.7.
Try SWDC_RUNTIME and SWDC_DEFINITION - not sure if they are in ECC6.
Let us know if this is the solution.
regards
Rick Bakker
Hanabi Technology

Proxy was not working in sap r/3

Hi All,
I have a scenario from jdbc to SAP.I have made serverproxy.The proxy was not working.I have test the proxy backend it is working fine,but i am staring jdbc channel the data was not insert in to the database table in sap.I have checked in sxmb_moni in sap r/3 system is showing scuessfully,but data was not sent to proxy.I have put one break point in the code for debugging the proxy.But data was not comming to breakpoint.Kindly help me.
Thanks
Ravi

Hi ,
Please try with this link.
http://ecohub.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0dec9f5-e9a0-2b10-c1a8-e355d01af932&overridelayout=true

IF-condition not working in sap script??????

hi,
 i am trying to chk one condition in sap script using if statement....but it is not working at all.
statement i am writing is :-
/: IF &IST_ITEM-SAD_PRINT& <> 0
p7 ,,,,,,,,,,,,,,,,SAD,, 4.00 &IST_ITEM-SAD_PRINT&
/: ENDIF
value for IST_ITEM-SAD_PRINT is coming as it is shown while debuging .
eventhen control is going inside if statement independent from the value of IST_ITEM-SAD_PRINT
how to use if statement properly....
regards
Deepak

Hi,
Declare a dummy variable of type IST_ITEM-SAD_PRINT and then use that variable in sapscript..
Ex..
Print program
DATA: V_DUMMY LIKE IST_ITEM-SAD_PRINT.
Sap script
/: IF &IST_ITEM-SAD_PRINT& <> &V_DUMMY&
p7 ,,,,,,,,,,,,,,,,SAD,, 4.00 &IST_ITEM-SAD_PRINT&
/: ENDIF
Thanks,
Naren

BRFPlus Rules not working in SAP MDG 7.0 sp2

Similar Messages

Maybe you are looking for