Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW

Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW plug-ins. The old 8.4 and the new 8.7. But it doesn't work. Have removed and reinstalled several times. What is going on? Why can't I update bridge to the latest version 8.7 or read my raw files from the Canon 7dmk2?

Try this:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

Similar Messages

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

The old version of Sync will continue to work, but then it says "for a limited time"??

I have read all the info on the new sync, but it is not clear to me when it says:
"While the old version of Sync will continue to work, the latest version of Firefox doesn't support adding new devices to the old version of Sync. This means that you won't be able to sync with a new device.
to allow for migration to Firefox Accounts."
the old version of Sync will continue to work,
but
Mozilla will continue to host the old version of Sync for a limited time...?
This is confusing.
Does i mean that
the old version of Sync will continue to work for a limited time only?
or rather,
that it will work indefinitely, but only for your devices already paired/synced?

The new version of Sync will work in a limited capacity for a short time. You can use it as is, but you can't add new devices. You should upgrade to the new sync ASAP (it's more reliable and robust).
[[How to update to the new Firefox Sync]]

My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS 6.1.5

You do have iTunes 10.7 or later on the computer, right?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Ok,I am looking to put MAC OS 10.5.6 on my powerbook g4 1.5mhz w/ 1.25gigs of ram. I found a copy of 10.5.6 but the seller says that you can't update it to .8 is this true?

Ok,I am looking to put MAC OS 10.5.6 on my 12" Al powerbook g4 1.5mhz w/ 1.25gigs of ram. I found a copy of 10.5.6 but the seller says that you can't update it to .8 is this true?

Before installing 10.5 make sure of the following: https://discussions.apple.com/docs/DOC-2275

I have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?

i have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?

Hi, and welcome to Apple Support Communities.
Mac OS X 10.5 is not a free download. You have to buy it.
http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC
Not all iBooks are compatible with Mac OS X 10.5. Check out the system requirements here:
http://support.apple.com/kb/HT3759?viewlocale=en_US
Good luck.

IPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

iPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

This is the ipod touch forum.
Try posting in the ipod nano forum.

Sometimes , when I open ITunes Radio, an ad saying that I'm listening to iTunes Radio over and over and I don't get to listen to music. Usually other stations work but select stations just keep repeating the same ad. Why is this?

Sometimes , when I open ITunes Radio, an ad saying that I'm listening to iTunes Radio over and over and I don't get to listen to music. Usually other stations work but select stations just keep repeating the same ad. Why is this?

It started working again. I guess it just got messed up

I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other ap

I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other apps but photoshop no. Any ideas?

I don't think I can access the crash report? Excuse the ignorant questions I'm about to make am a relative tech novice.
Soo - as mentioned every time I open photoshop it crashes - it just says there's an error and the program will shut down and if there's a solution windows will notify me. Then nothing...
I've tried to look in photoshop files for the detailed crash report & the system event viewer but cannot find a file with those names. I've also looked in the windows files for files with those names but cannot find them either - so I don't know where to look.
Any guidance would be great.

HT1212 my friend gave me is old ipod touch that had a password that he forgot..ive tried connecting it to my itunes, but it keeps saying i need the password..help?

My friend gave me his old ipod touch that had a password that he forgot..ive tried hooking it up to my itunes, but it keeps saying i need the password, how do i rest it? help?

Then get the previous owner to remove the iPod from their account
Apple's new iCloud tool can show if a used iPhone is stolen
If you can't get that done then all yo have is a poor flashlight. You are running into
Find My iPhone Activation Lock
Which is an anti-theft feature. Apple will not help since you are not the original purchaser of the iPod
knownstranger wrote:
Will this work with iOS 8 because I factory reset but still need original owners ID which I can't get . I got iPod 5

How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

Im just guessing but it seems like you would have to get your movie into the correct folder on a computer then use iTunes to sync it to your iPad. If you've synced to a computer and have movies then on your computer should be a folder with the movie in it. You could export your iMovie to something like Dropbox then download from Dropbox to the folder you think it needs to be in the sync your iPad again. Again this is just a guess. Others may have a better answer.

HT1555 i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC

In Numbers, I copied a worksheet and deleted the contents. The sheet I copied from has a header, I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete it?

In Numbers, I copied a worksheet and deleted the contents. The sheet I copied has a header. I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete the header?

Hi Cristina,
Headers are not shown in normal view.
Menu > File > Print to open Print View.
Hover the cursor over the Header to see the outline. Click and delete.
Regards,
Ian.

Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW

Similar Messages

Maybe you are looking for