Bridge 5.1: The operation could not be completed (Mac OS 10.8)
The operation could not be completed (Mac OS 10.8)
Yeah, that's bad, I suppose, but without telling us what you are actualyl trying to do, I'm afraid nobody can help you...
Mylenium
Similar Messages
-
Bridge CS5 freezes after error message...."The operation could not be completed, there is not....
Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
Select "Use Custom Rules",
Browse to a custom dump file folder,
Check "All Exceptions",
Check "Ignore Exceptions that occur inside Kernel32.dll",
Select "Mini Dump Type" to "Small"
Select "Save Mode" to "Cyclic Saving 5 times"
Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li -
Bridge Crashing: Error message "The operation could not be completed. The file is Locked
Bridge is acting real funny lately: It won't close, so I have to force quite, then I get the error message: "The operation could not be completed. The file is Locked"
Thread 7:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x00000001006ae71e boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 332350
3 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
4 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
5 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
6 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 8:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x000000010066b372 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 56978
3 com.adobe.bridge5 0x000000010066939d boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 48829
4 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
5 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 9:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011ebce948 void boost::condition_variable_any::wait<boost::unique_lock<boost::mutex> >(boost::unique_lock<boost::mutex>&) + 80
2 SwitchBoardClient 0x000000011ebc2cc8 adobe::switchboard::ConnectionQueue::run() + 300
3 SwitchBoardClient 0x000000011ebc78a3 boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>::operator()(adobe::switchboard::ConnectionQueue*) const + 97
4 SwitchBoardClient 0x000000011ebc7911 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011ebc794e boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011ebc796c boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011eb66a41 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 59
2 SwitchBoardClient 0x000000011eb89433 adobe::switchboard::Client::run() + 111
3 SwitchBoardClient 0x000000011eb91e05 boost::_mfi::mf0<void, adobe::switchboard::Client>::operator()(adobe::switchboard::Client*) const + 97
4 SwitchBoardClient 0x000000011eb91e49 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Client>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011eb91e86 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011eb91ea4 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 11:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 12:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 13:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 MultiProcessor Support 0x00000001165ac113 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 139
2 MultiProcessor Support 0x00000001165ac1d0 ThreadFunctor::operator()() + 92
3 MultiProcessor Support 0x00000001165c8f70 thread_proxy + 160
4 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
5 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 14:
0 libsystem_kernel.dylib 0x000000010a9894de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x000000010a98864f mach_msg + 55
2 com.apple.CoreFoundation 0x0000000106e8fb34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x0000000106e8effb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x0000000106e8e858 CFRunLoopRunSpecific + 296
5 com.apple.AppKit 0x0000000101fac33b _NSEventThread + 137
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 15:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 16:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 17:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000001 rbx: 0x0000000123d20ff0 rcx: 0x0000000023d20000 rdx: 0x0000000000000000
rdi: 0x0000000000000000 rsi: 0x0000000000000067 rbp: 0x00007fff5fbff880 rsp: 0x00007fff5fbff870
r8: 0x0000000111d0da00 r9: 0x0000000000000600 r10: 0x0000000012e3bdbc r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x00000000000000ce r14: 0x0000000000000067 r15: 0x0000608000018700
rip: 0x000000010495a94d rfl: 0x0000000000010202 cr2: 0x000000000000003c -
I cannot get Bridge to open - I get the message that "the operation could not be completed"
I cannot get Bridge to open in my new CS5 Suite - I get the message that "the operation could not be completed." Photoshop comes up fine, but no Bridge. I have a MacBook Pro. Thanks.
I am having the same issue.
MacBook Pro, OSX 10.6.4
Photoshop CS5, Bridge CS5
It will not open, I have reinstalled, cleared the cache, & reset preferences, + installed the patch.
I do have Bridge CS3 that came with my PS Elements, & that works. Do not have any Norton, or other software running. -
BRIDGE: The operation could not be completed
I am using Creative Cloud, I have successfully installed diffetents App`s. PS,AI etc. When I install
Bridge and open the app like any other app a error pop`s up. !! the operation could not be completed.
It a brand new mac, so not a space issue. If anyone have and idea what`s worng please let me know.
Thanks NB TOKYOI don't know what the problem is, but if you type "operation could not be completed" into the forum search, you get lots of results.
-
I cannot start bridge (Mac 10.8.2) CS6. States "the operation could not be completed"
I cannot start bridge (Mac 10.8.2) CS6. States "the operation could not be completed" but if I use another user account it works fine. I have uninstalled and re-installed Creative Suite but no differene.
Are there some logs or cache's that I need to delete or something??
Please helpbut if I use another user account it works fine. I have uninstalled and re-installed Creative Suite but no differene.
Are there some logs or cache's that I need to delete or something??
There are a few things to try but it means the problem is in the account itself. un- and reinstall the Suite will not help if you are not also using the Adobe cleaner tool for this job:
http://www.adobe.com/support/contact/cscleanertool.html
Check this and read the instructions carefully and most important, have a back up of your important settings (in Photoshop your custom actions, tool presets, brushes and workspaces and for Bridge the custom output templates and keyword list, to name the most important for me).
If you check your user library (by default hidden per OSX 10.7, use menu Go and press option to reveal this library) Inhere is a folder called Application support and most of those settings are here - User/Library/Application Support/Adobe.
If you copy this folder to a back up location you can always use this to copy the certain wanted parts to the new installed folder.
Also use a check and repair permissions on your start up disk with Apple disk utility or third party software like Cocktail.
And finally since your still on 10.8.2 they just recently released 10.8.3
Usually the update procedure is using the App Store and check software update. BUt in this case it might be useful to find the 10.8.3 Combo Update on the Apple Support section.
You have to download this yourself and then it is a normal update procedure. The combo update does a bit more refreshing for the user account then the normal update.
And if all this is not helping you then you can use the Apple recovery disk to reinstall your system, this is what before was known as an Archive and Install procedure. This creates a new user library while all your custom settings and files are being kept.
But you have to find info for yourself for this and also make sure you have a proper back up of all your important files, but as a wise person you already had done so I believe ? -
PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
Dear Adobe Community,
I got my first imac a few days ago, and i decided to install Adobe CC.
When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
And I also have a problem with Premiere, when i want to export a project says that premiere must close.
This is the try version, is this a problem of Adobe or Apple? i'm very worried
Help!
Thank you!
IvanaMuchas gracias!!! Ha funcionado!
El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Confirma que se trata de una cuestión de permisos.
Por cierto te aconsejos actualices la 9.1 a 9.2, posiblemente se habría arreglado así también.
Bueno los pasos son:
2. Select Go from the Finder Menu.
3. Select Computer.
4. Select Macintosh HD.
5. Select Users.
6. Select your user profile.
7. Right click on user profile. Select Get Info.
8. Go to bottom and unlock with admin password to make changes.
9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
Creo que no se necesita traducción.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Launch PB in CS5 and get "The operation could not be completed."
I had been using the PB plug-in previously and it worked fine. Since that time, I have installed no new hardware or drivers but have installed Topaz Adjust 4 filter. Now, when I have an image opened in PS CS5 and I click Filters -> Pixel Bender -> Pixel Bender Gallery... I get a modal dialog with the title Error and the message "The operation could not be completed." I tried reinstalling the extension and no luck.
Here's some relevant info:
Adobe Photoshop Version: 12.0.1 (12.0.1x20100625 [20100625.r.1146 2010/06/25:17:40:00 cutoff; r branch]) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 3073 MHz
Built-in memory: 2045 MB
Free memory: 360 MB
Memory available to Photoshop: 1634 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1400
Video Card Number: 1
Video Card: NVIDIA GeForce FX Go5600 (Sony)
Driver Version: 6.14.10.4690
Driver Date: 20031106141200.000000-000
Video Card Driver: nv4_disp.dll
Video Mode: 1400 x 1050 x 4294967296 colors
Video Card Caption: NVIDIA GeForce FX Go5600 (Sony)
Video Card Memory: 64 MB
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5\
Temporary file path: C:\DOCUME~1\matt\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 73.2G, 12.2G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
Additional Plug-ins folder: not set
...snip...
Installed plug-ins:
...snip...
Pixel Bender Gallery 12.0
...snip...
Topaz Adjust 4 10.0
...snip...
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Access CS Live
CS Review
CS News and Resources
Installed TWAIN devices: NONEI take it you've rebooted your machine a few times since all this has happened? Something must have changed to cause this problem. You could try deleting the Photoshop preferences and the Pixel Bender plugin preferences. You doublechecked that you have the latest drivers from nVidia (and you did so by manually comparing the result provided on the nVidia driver page with the driver version found in the Display preferences? Are you running on a laptop? If so, who is the manufacturer?
-
PS 3: The operation could not be completed. Not enough space.
Pictures are not shown in the small window in Bridge, and if I click on a thumbnail, it opens CS with the message: The operation could not be completed. Not enough space.
What can I do?
ThanksYou should be able to check Don't Show Again
-
Error while consolidating. The operation could not be completed.
Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-) -
Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please? -
IMovie error message "The operation could not be completed"
I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
ThanksMy problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with. -
The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.
my os is windows 7. elements 12 worked fine for many months then save for the web stopped working
-
The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?
https://discussions.apple.com/thread/6219522
-
The operation could not be completed because an item with the name xyz already exists
I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities
Maybe you are looking for
-
I am having issues trying to get the nullable attribute of a view to be "No". I created a very simple view to test, and the issue I am running into is anytime I specify a Union in the query every field in the view is set to nullable. In this very sim
-
Why is my CLEAR_BLOCK(no_validate) not committing to the database?
What I need is when the alert button 1 is selected fo to the detail block(ADM) and just delete everything for the current master id. When I click on the button it deletes for a split second and all the data comes back.Quite confused.. IF Id_Null(al_i
-
HT1918 can i use a prepaid visa card
can i use a prepaid visa card?
-
How to disable unlimited data?
Hi Meteor! I would like to disable for few months my unlimited data because I wont be in Ireland for few months and I would like to keep the money only for calls. How I could disable it? Thanks in advance,Loren
-
Hi, I have a SCCM 2012 R2 CU2 installation where I modify applications with PowerShell. I have 207 applications created in SCCM and when I use the command "Get-CMApplication" to get a list of all the applications. It takes more than 20 seconds to ret