Bridge Airport Express with Snow Airport

I'm thinking of getting an Express so I can print wirelessly to my Canon i850. I already have a Snow that I would like to extend the wireless network with. Can the Snow remain the main router and Express be secondary and still be able to print? Or does the Express has to be the primary router?

The Snow base station cannot become a wireless client of an AirPort Express. The other way around does work.
It really depends on what you are trying to do...What do you want the Express to do? If you need to use the Ethernet port for Internet Access then you are correct that your setup will not work. If all you are using the Express for is the USB port for the printer, then it would work (where your Snow is used for Tivo and Internet).

Similar Messages

Airport express with Snow and wired Mac Mini?

Hi,
I am trying to help my parents set up airport express.
They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
Thanks!

Nevermind, I guess I answered my own question.

Linking airport express with other airport express or belkin base

is it possible to link my airport express with another and thus have wireless coming from both?
if not, can it be done with anything other than an apple base, namely Belkin?
any help would be appreciated. thanks

You can link two Express units in a WDS network, by configuring one to extend the wireless network of the other.
Airport Express units can extend a Belkin wireless network if you are using a Belkin F5D7230-4 or F5D7231.
iFelix

Renamed Airport Express with the Airport utility, but iTunes shows old name

I renamed my two Airport Expresses using the Airport Express utility because I have moved them in the house and the old names don't make sense anymore. In the AirPort Express utility, I can see the new names. However, iTunes (and Apple Remote on the iPhone) do not recognize these new names, they are still showing the old names. How can I get these devices to recognize the new names?

Actually I have solved my own problem. I hadn't realized that the Airport Utility has essentially two names for each Airport. There is the name of the device as the Airport Utility sees it, and then a different name called the iTunes Speaker name (look under manual setup in the Music area). This latter is the name that appears in iTunes. As soon as I changed this, iTunes recognized the new name.

Using an Airport Express with an Airport Extreme in bridge mode

Im trying to use an Airport extreme and an Airport express to have good Wifi coverage in a house. The current Wifi is from a Verizon Westfall modem/router. I went into setup on the modem/router and disabled the wifi, then connected the Extreme to one of the 4 ports on the modem/router. I setup the Extreme in bridge mode ( because I believe I dont want 2 differnt routers handing out local IP's, right? . Anyway, it seems to work fine but I'm trying now to hook up an Express to widen my wifi area. I have cat5 ports all over the house that go back to the Exteme's location so its not a problem to connect the Extreme to the Express via ethernet cable. Im wondering if its possible to use the Express hardwired to the extreme while in Bridge mode because I cant seem to set it up properly. Can anyone out there answer that question and/or give me instructions on setting up this scenerio.
Thanks!

I will reset it like you said and then I should have the cable from the Extreme going to witch port on the express?
WAN "O" port
To set up the Express, open AirPort Utility, click on the Express and click Manual Setup
Click the Base Station tab just below the icons to assign a device name for the Express, device password, adjust Time Zone, etc. Should look like this, in general:
Click the Wireless tab next to Base Station. Adjust as follows:
Wireless Mode = Create a wireless network
Wireless Network Name = Exact same wireless network name as the AirPort Extreme
Enter check mark next to Allow to be extended
Radio Mode = Automatic or same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Exact same setting as the AirPort Extreme
Wireless Password = Same wireless password as the AirPort Extreme
Verify Password
Setting should look like this, in general:
Click the Internet icon, then click the Internet Connection tab.
Connect Using = Ethernet.
Connection Sharing = Off (Bridge Mode)
Click Update to save settings
Things will look like this:
You will see a green light in 25-30 seconds.
Be sure to restart the entire network.

Airport express with older airport

I just received a new airport express and connected it to my stereo. But after trying a number of things, I still get a flashing amber light. I'm trying to use it as a client with a Snow airport.
Is that possible? Or does it require an Airport Extreme base station to function as a client.

The definitive guide to setting up a network of original Airport
with Airport Express so you can surf and play music concurrently.
You cannot do much with an original Airport, Graphite or Snow.
However at least Airport Extreme and Airport Express are backward compatable.
In addition the Airport Configuration Assistant nas changed over time such that as at Tiger
Airport Assistant will work for models of Airport.
However, Panther requires Airport Assistant Graphite/Snow.
Assuming you already have an Airport(A) network going,
and you want to add the Airport Extreme(AE).
Note all details of your existing network, name, WEP password and encryption level
etc.
1) Disconnect your Graphite/Snow base station
2) Disable any Firewall connections for now.
(Let's just make sure it works first)
3) Turn A off on the iMac
4) Turn A on on the iMac
5) Connect all cables ithat you will use to AE.
6) Plug in.
7) To be sure to be sure, hit the reset button with a pin for 5 seconds.
The light will then flash to green and the AE will re-initialise to factory settings.
(Usefull when everything gets screwed!)
8) Turn on A at iMac
9) Invoke Airport Admin at iMac
If you have done all correctly then AE will magically appear in the picklist.
If not, then, choose the A icon and connect to ip address 10.0.1.1 with a password
of "public".
10) Configure the AE to "join an existing network" as a client.
Set the password, select the speakers for music, set the encryption to only 40 bits WEP
as that is all A can do.
11) Disconnect iMac from network.
12) Power down the AE.
13) Star up the Graphite/Snow A. and connect the iMac A.
14) Power on the AE.
16) Use Airport Config Assistant to setup the AE.
You can then check all settings with Airport Config.
17) iTunes will now pick up the speakers just dandy.
18) When you put back the Firewall, then ensure
for the interface in question, usually en1, that you allow
DHCP via ports 67-68, Airport Config via port 5009,
and data packets of UDP via port 5353.
19) If you like having a physical cable connection to your PC as I do
then, just make sure that when you boot the PC, that airport
does not start up on boot, or login.
ie you want your internet to be on interface en0.
Then later start up airport on interface en1.

Can't set up airport express with new Airport Extreme

I have a new aiport extreme base station and two airport expresses. All was well till I tried to plug in a hard drive then the base station needed to be reset. Now I can't get it to recognize the aiport expresses. I have to do a factory reset on the express to even get it to recognize it in the Airport Utility. I follow the instructions to have it join my existing network, I get to the point where it says I have successfully joined the network and the express will restart, but I never get a green light on the express and then I can't locate it while using the airport utility.
is there something in the configuration of the airport extreme that is blocking this?

I have a new aiport extreme base station and two
airport expresses. All was well till I tried to
plug
in a hard drive then the base station needed to be
reset. Now I can't get it to recognize the aiport
expresses. I have to do a factory reset on the
express to even get it to recognize it in the
Airport
Utility. I follow the instructions to have it
join
my existing network, I get to the point where it
says
I have successfully joined the network and the
express will restart, but I never get a green
light
on the express and then I can't locate it while
using
the airport utility.
is there something in the configuration of the
airport extreme that is blocking this?
Are you trying to use the expresses in WDS or client
mode? If you are trying to use WDS, do you have WDS
enabled on the main extreme base station?
I hae been using client mode as best as I can tell. I have been going through the setup with the express and chosing to join an exisiting network and not extend the range of the current network.

How to stream from iPad to apple tv via airport express with the airport express being connected to the internet

I have an apple tv, iPad 3 and airport express. Im at school and the apple tv is technically not supported by the network. Ive read that one could use AirPlay to apple tv via AE.
Can someone help me make this work? Step by step process if possible.
Thanks in advance,

The router does provide WIFI, but the thing is the Apple TV will be out of reach. I want to avoid having two routers / networks. That's why Apple TV is hardwired. The AirPort (also hardwired) should only work as a receiver for the iPhone - streaming iPhone content to the Apple TV.
BOTH the Apple TV and the AirPort Express are AirPlay "speakers." That is, you can stream from iTunes to either device. You don't need both if the Apple TV is hardwired to an existing router. That provided the necessary networking for AirPlay to stream over. Wi-Fi is NOT required for AirPlay if you have a wired connection between the AirPlay "server" (i.e., iTunes host) and the AirPlay "speaker."
The Apple TV would work as a "receiver" for your iPhone.
If AirPlay is an application layer software, how may two AirPlay device communicate directly? Normally all communication is relayed by the access point.
AirPlay is a streaming protocol that runs over TCP/IP. AirPlay "speakers" DO NOT communicate with each other directly. The basic communication path is between an AirPlay "server" and an AirPlay "speaker" or multiple "speakers." Again the path between them can be either be wired or wireless or some combination of each.

Using old Airport Express with new Airport Extreme to stream music

I recently purchased the newest Airport Extreme to replace my older Airport Express. I'm running OS 10.8.5. I like the speed of the new WIFI signal for streaming to Apple TV. No long waits or buffering interruptions while watching movies. I still want to use the old Airport Express to stream music from my iPhone to a stereo in another part of the house. I plugged in the Express module and it just flashes amber. Doesn't show up in Airport Utility either.

I suggest that you first perform a "factory default" reset on your old AirPort Express, and then, check out the following Apple Support article for configuring it for streaming.

Can i use my Airport Express with another Airport express w/o base station

I was wondering if i could use one airport for my main internet and the other one for useing my ps2 online (hooking up a cable to go from the ps2 to the airport) Would the 2nd airport express pick up the others internet?

Yes you can using WDS.
Configure the first base station I presume as a
wireless access point connected to your main router
by cable.
Configure the second to extend the network of the
first.
iFelix
Felix - what are the steps to set up two airport expreses to work together to extend range?
thanks
john

How do i connect my airport extreme with my airport express

how do i link my Airport Express with my Airport Extreme?

Hello Bob -
I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection. It does not seem to work, and has crashed my network twice. When I did get it to work, the wireless crawled. When I took the AirPort Express off of the network the speed went back up.
Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access. Any suggestions for this older model AirPort Express?
Thanks.

Link Airport Express to an AirPort Time Capsule to use Airplay?

I am thinking about getting an 2GB AirPort Time Capsule. I use the Airplay feature on my Airport Express that is not part of the AirPort Time Capsule and that is the only reason I have not replaced the Airport Express with the Airport Time Capsule. Has anyone had any experience in setting up a these two units to do what they do together? Any potential problems linking these two units together?

If your intent is to use the new Time Capsule as your "main" Internet router, and then, use the Express for iTunes streaming this can be done without any real issues.
Please check out the following Apple Support article on how to configure an AirPort Express for iTunes.

Trying to set up Airport Express with Ethernet Powerline adapters

Hello,
Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
I want to set up as follows:
Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
I have airport admin utility configured as follows:
Airport tab:
Wireless mode: create a wireless network
Wireless network name: same as my wireless router SSID
Allow this network to be extended: unticked
radio mode: 802.11n (802.11b/g compatible)
Channel: automatic
Wireless Security: WPA/WPA2 personal (as per my router)
Wireless Password: as per my router
Verify Password: as per my router
Internet tab:
Connect using: ethernet
Connection sharing: off (bridge mode)
Music tab:
Enable Air Tunes ticket
no password set
In iTunes, I have home sharing on & share entire library selected with no password set.
Using OS 10.6.5 & Airport Express 7.5.2
I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
Any assistance would be appreciated....
Thanks

Hi,
Thanks for the quick response...
As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
So, the problem is the relatively new Belkin F7D4401 router.
Looks like I will have to find an alternative 802.11n...
Thanks for your help.
Regards
Simon

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

Bridge Airport Express with Snow Airport

Similar Messages

Maybe you are looking for